Copper Catalyzed Borylation of Alkynes: An Experimental Mechanistic Study.

The copper catalyzed hydroboration of alkynes with B2pin2 was studied by in detail studies of individual relevant steps along the catalytic pathway. A number of reaction steps were retraced by in situ NMR spectroscopy as well as central intermediates and side-products were isolated and comprehensively characterized. A copper boryl complex is central to the catalytic process by inserting the terminal alkyne substrate into the B-Cu bond. The selectivity of this step - depending on the NHC auxiliary ligand - determines the α/ß selectivity observed in the product. The latter complex is protonated by the auxiliary alcohol reagent resulting in hydroboration product formation and formation of a Cu alkoxido complex. Reaction of the latter with B2pin2 results in the regeneration of the central copper boryl complex. This alcoholysis step depends on the acidity of the alcohol, in particular on the relative acidity of the alcohol vs. the alkyne substrate. A number of side reactions leading to the hydrogenation product of the alkyne substrate and a bis hydroborated product were identified and studied in some detail. It is concluded that the performance of a particular catalytic system depends crucially on the relative acidities of the reagents and generalizations may be difficult.

Molecular replacement for small-molecule crystal structure determination from X-ray and electron diffraction data with reduced resolution.

The resolution of 3D electron diffraction (ED) data of small-molecule crystals is often relatively poor, due to either electron-beam radiation damage during data collection or poor crystallinity of the material. Direct methods, used as standard for crystal structure determination, are not applicable when the data resolution falls below the commonly accepted limit of 1.2 Å. Therefore an evaluation was carried out of the performance of molecular replacement (MR) procedures, regularly used for protein structure determination, for structure analysis of small-molecule crystal structures from 3D ED data. In the course of this study, two crystal structures of Bi-3812, a highly potent inhibitor of the oncogenic transcription factor BCL6, were determined: the structure of α-Bi-3812 was determined from single-crystal X-ray data, the structure of ß-Bi-3812 from 3D ED data, using direct methods in both cases. These data were subsequently used for MR with different data types, varying the data resolution limit (1, 1.5 and 2 Å) and by using search models consisting of connected or disconnected fragments of BI-3812. MR was successful with 3D ED data at 2 Šresolution using a search model that represented 74% of the complete molecule.

Synthesis, Reactivity and Coordination Chemistry of Group 9 PBP Boryl Pincer Complexes: [(PBP)M(PMe3)n] (M = Co, Rh, Ir; n = 1, 2).

The unsymmetrical diborane(4) derivative [(d(CH2P(iPr)2)abB)-Bpin] (1) proved to be a versatile PBP boryl pincer ligand precursor for Co(I) (2a, 4a), Rh(I) (2-3b) and Ir(I/III) (2-3c, 5-6c) complexes, in particular of the types [(d(CH2P(iPr)2)abB)M(PMe3)2] (2a-c) and [(d(CH2P(iPr)2)abB)M-PMe3] (2b-c). Whilst similar complexes have been obtained before, for the first time, the coordination chemistry of a homologous series of PBP pincer complexes, in particular the interconversion of the five- and four-coordinate complexes 2a-c/3a-c, was studied in detail. For Co, instead of the mono phosphine complex 2a, the dinitrogen complex [(d(CH2P(iPr)2)abB)Co(N2)(PMe3)] (4a) is formed spontaneously upon PMe3 abstraction from 2a in the presence of N2. All complexes were comprehensively characterised spectroscopically in solution via multinuclear (VT-)NMR spectroscopy and structurally in the solid state through single-crystal X-ray diffraction. The unique properties of the PBP ligand with respect to its coordination chemical properties are addressed.

How the Way a Naphthalimide Unit is Implemented Affects the Photophysical and -catalytic Properties of Cu(I) Photosensitizers.

Driven by the great potential of solar energy conversion this study comprises the evaluation and comparison of two different design approaches for the improvement of copper based photosensitizers. In particular, the distinction between the effects of a covalently linked and a directly fused naphthalimide unit was assessed. For this purpose, the two heteroleptic Cu(I) complexes CuNIphen (NIphen = 5-(1,8-naphthalimide)-1,10-phenanthroline) and Cubiipo (biipo = 16H-benzo-[4',5']-isoquinolino-[2',1',:1,2]-imidazo-[4,5-f]-[1,10]-phenanthroline-16-one) were prepared and compared with the novel unsubstituted reference compound Cuphen (phen = 1,10-phenanthroline). Beside a comprehensive structural characterization, including two-dimensional nuclear magnetic resonance spectroscopy and X-ray analysis, a combination of electrochemistry, steady-state and time-resolved spectroscopy was used to determine the electrochemical and photophysical properties in detail. The nature of the excited states was further examined by (time-dependent) density functional theory (TD-DFT) calculations. It was found that CuNIphen exhibits a greatly enhanced absorption in the visible and a strong dependency of the excited state lifetimes on the chosen solvent. For example, the lifetime of CuNIphen extends from 0.37 µs in CH2Cl2 to 19.24 µs in MeCN, while it decreases from 128.39 to 2.6 µs in Cubiipo. Furthermore, CuNIphen has an exceptional photostability, allowing for an efficient and repetitive production of singlet oxygen with quantum yields of about 32%.

Ligand properties of boryl ligands in bis-boryl rhodium(III) complexes: a case study.

The oxidative addition of five diborane(4) derivatives, symmetrical and unsymmetrical, to [Rh(PMe3)3Cl] was studied. Only for the more electron poor diboron derivatives, B2cat2, B2pin2 and catB-Bpin the resulting octahedral bis-boryl complexes [(PMe3)3Rh(boryl)2Cl] were obtained, while for the more electron rich congeners only the equilibrium oxidative addition (catB-Bdmab) or no significant reaction (pinB-Bdmab) was observed (pin = (OCMe2)2, cat = 1,2-O2C6H4, dmab = 1,2-(NMe)2C6H4). By abstraction of the chlorido ligand with NaBArF (BArF = tetrakis-[3,5-bis-(trifluormethyl)-phenyl]-borat) in the presence of a neutral ligand (L = PMe3, MeCN, MeNC) the corresponding cationic octahedral complexes [(PMe3)3Rh(boryl)2L]+ were obtained. All isolated complexes were fully characterised including single crystal X-ray diffraction and heteronuclear, temperature dependent NMR spectroscopy. Whilst the complexes [(PMe3)3Rh(boryl)2Cl] and [(PMe3)3Rh(boryl)2L]+ show many similarities, their detailed structural and spectroscopic properties depend crucially on the properties of both boryl ligands.

N-H deprotonation of a diaminodialkoxido diborane(4) - a structural study on bifunctional Lewis acids/bases and their dimerisation to B(sp2)2B(sp3)2N2 six membered rings.

The N-H deprotonation of the diaminodialkoxido diborane(4) pinB-Bdab (1) (pin: (OCMe2)2, dab: 1,2-(NH)2C6H4), is crucial for the electrophilic N-functionalisation towards unsymmetrical diborane(4) reagents. An N-H deprotonated diborane(4) comprises Lewis basic nitrogen atoms and at the same time Lewis acidic boron atoms. This bifunctionality governs its reactivity and structural chemistry. Whilst bases such as Na(hmds), tBuLi or Li(tmp) readily effect a single deprotonation of 1, the second deprotonation is less straightforward and cleanly only achieved with Li(tmp) as a strong but little nucleophilic base. The N-H deprotonated diborane(4) derivatives readily dimerise to give B(sp2)2B(sp3)2N2 six-membered ring Lewis base adducts. The structural chemistry of this class of compounds was studied in detail in the solid state by single crystal X-ray diffraction as well as in solution by NMR spectroscopy.

New Members of the Cinchona Alkaloids Family: Assembly of the Triazole Heterocycle at the 6' Position.

The substance class of the well-known Cinchona alkaloids is widened by 6'-Amino-cinchonine and 6'-Amino-cinchonidine, novel compounds which incorporate a primary amino function in the quinolinic ring system. These key intermediates open the field for a range of fruitful chemistry. Here is described a short and direct pathway for the synthesis of triazole containing derivatives of the above-mentioned substances using the [3 + 2] Huisgen cycloaddition. For this purpose, the amines were first converted into the corresponding azides. Based on this, non-substituted and silyl-protected triazoles were synthesized as examples. Furthermore, didehydrated derivatives of quincorine and quincoridine were used as addition partners, resulting in compounds that carry the quinuclidine ring of the cinchona alkaloids at both ends. Some of these compounds were examined radiographically to investigate the position of the quinuclidine ring to the triazole. The solid-state structures of compounds 10, 11 and 28 were determined by X-ray diffraction analyses.

Terminal versus Bridging Boryl Coordination in N-Heterocyclic Carbene Copper(I) Boryl Complexes: Syntheses, Structures, and Dynamic Behavior.

The B-B bond activation of the diborane(4) derivatives B2cat2 with the copper(I) alkoxido complex [(SIDipp)Cu-O tBu] delivers, depending on the solvent, either the linear boryl complex [(SIDipp)Cu-Bcat] from PhMe or the µ-boryl complex [((SIDipp)Cu)2Bcat][cat2B] from THF. The relevant conversion of the linear boryl complex to the µ-boryl complex occurs in the polar solvent via formal boryl anion abstraction by the Lewis acid catB-O tBu, concomitantly formed during the B-B activation. With Lewis acids such as BPh3 or [CPh3][BArF] (reversible), boryl abstraction from the linear complexes [(SIDipp)Cu-Bcat] or [(SIDipp)Cu-Bdmab] occurs and results in the µ-boryl complexes [((SIDipp)Cu)2Bcat/dmab][Ph3B-Bcat/dmab] and [((SIDipp)Cu)2Bcat][BArF]. The formation of [((SIDipp)Cu)2Bcat][cat2B] is generally accompanied by the concomitant formation of the µ-hydrido complex [((SIDipp)Cu)2H][cat2B]. The spiroborate [cat2B]- is formed from the initially formed Lewis acid/base adduct [catB-B(O tBu)cat]- presumably in a process that involves the glass surface of the reaction vessel. All complexes are thoroughly characterized structurally as well as spectroscopically, in particular with respect to the dynamic behavior of the µ-boryl complexes in solution.

Exploring unsymmetrical diboranes(4) as boryl ligand precursors: platinum(ii) bis-boryl complexes.

A series of five unsymmetrical platinum(ii) bis-boryl complexes, bearing two distinct boryl ligands, are obtained by the oxidative addition reaction of unsymmetrical diborane(4) derivatives, bearing either two different dialkoxy or one dialkoxy and one diamino boryl moiety, with [(Ph3P)2Pt(C2H4)]. All five complexes were structurally and spectroscopically characterised. The bis-boryl platinum(ii) complexes exhibit slightly distorted square-planar cis-boryl structures with acute B-Pt-B angles, short B⋯B distances of 2.44-2.55 Å and relatively long trans-boryl P-Pt distances around 2.34 Å. The 31P-195Pt NMR coupling constants are indicative for the strongly donating/trans-influencing boryl ligands. Despite the structural and spectroscopic data at hand no finally conclusive order of the donor properties/trans-influence of the boryl ligands can be deduced on the basis of these data. This may be explained by an (residual) interaction of two boryl ligands.

A modular approach to carbene-stabilized diphosphorus species.

Heteroleptic N-heterocyclic dicarbene-diphosphorus species were prepared by reaction of the carbene-phosphinidene adduct (IPr)PSiMe3 (1, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) with the carbene-phosphorus trichloride adduct (IMes)PCl3 (2, IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene), which furnished the dichloride [(IPr)PPCl(IMes)]Cl (3). Reduction of 3 with potassium graphite (KC8) afforded [(IPr)PP(IMes)] (4). The corresponding radical cation [(IPr)PP(IMes)]˙+ (5˙+) is isolated as [5]PF6 by reaction of 4 with ferrocenium hexafluorophosphate, whereas complexes containing the corresponding dication [(IPr)PP(IMes)]2+ (62+) can be isolated as the gallate and borate salts [6](GaCl4)2 and [6](BArF)2 by chloride abstraction from 3 with GaCl3 or sodium tetrakis[bis(3,5-trifluoromethyl)phenyl]borate (NaBArF), respectively. The asymmetric set of N-heterocyclic carbene ligands allows to establish 1JPP coupling constants of 249 Hz for 4 and 543 Hz for [6](GaCl4)2. Based on X-ray diffraction analyses, the molecular structures of 4, 5˙+ and 62+ reveal a consecutive shortening of the P-P bond lengths, in agreement with the presence of a phosphorus-phosphorus single bond in 4 and a double bond in 62+, which is best described as a dicationic diphosphene according to density functional theory (DFT) calculations.

[(18-C-6)K][(N≡C)CuI-SiMe2Ph], a Potassium Silylcyanocuprate as a Catalyst Model for Silylation Reactions with Silylboranes: Syntheses, Structures, and Catalytic Properties.

CuI-catalyzed silylation reactions involving silylboranes (in particular, pinB-SiMe2Ph (1)) as silyl sources have recently gained considerable attention. One of the most efficient and versatile and yet simplest catalyst systems consists of CuCN/NaOMe; however, nothing is known about the catalytically relevant species. Using an NHC-based model catalyst, copper silyl complexes of the type [(NHC)Cu-SiMe2Ph] have been established to be crucial species in these catalytic processes. The well-defined and spectroscopically and structurally characterized complex [(18-C-6)K][NC-Cu-OtBu] (2), as a model for the catalytic system, CuCN/NaOMe, shows comparable catalytic activity toward established, exemplary substrates (aldehydes, imines, α,ß-unsaturated carbonyls) and in extension allows the efficient silylation of ketones. In addition, a number of peculiarities of the catalytic reaction are readily rationalized on the basis of the mechanistic insight already established using [(NHC)Cu-SiMe2Ph] as a model catalyst. Analogously to the NHC model system, the reaction of 2 with the silylborane 1 furnishes the silylcyanocuprate [(18-C-6)K][NC-Cu-SiMe2Ph] (3) as a potential crucial intermediate in these silylation reactions also suggesting mechanistic similarities between (NHC)Cu- and CuCN/NaOMe-based catalyst systems. Moreover, 3 and [(NHC)Cu-SiMe2Ph] complexes also share structurally distinctive features. In the solid state 3 either exists as a linear, two-coordinated copper complex or, depending on the conditions of crystallization, forms binuclear µ-silyl bridged dimers exhibiting very short Cu···Cu distances. Both structural motifs are also known for [(NHC)Cu-SiR3] complexes. These findings give an initial insight into the versatile structural chemistry of certain silylcyanocuprates; in particular, the finding of dinuclear silylcuprates gives rise to the question whether these dimeric species are of mechanistic relevance for the catalytic processes. However, all peculiarities of the investigated catalytic reaction can readily be rationalized on the basis of the mechanistic details established using (NHC)Cu model complexes.

B-B bond activation and NHC ring-expansion reactions of diboron(4) compounds, and accurate molecular structures of B2(NMe2)4, B2eg2, B2neop2 and B2pin2.

In this detailed study we report on the structures of the widely employed diboron(4) compounds bis(pinacolato)diboron (B2pin2) and bis(neopentyl glycolato)diboron (B2neop2), as well as bis(ethylene glycolato)diboron (B2eg2) and tetrakis(dimethylamino)diboron (B2(NMe2)4), and their reactivity, along with that of bis(catecholato)diboron (B2cat2) with backbone saturated and backbone unsaturared N-heterocyclic carbenes (NHCs) of different steric demand. Depending on the nature of the diboron(4) compound and the NHC used, Lewis-acid/Lewis-base adducts or NHC ring-expansion products stemming from B-B and C-N bond activation have been observed. The corresponding NHC adducts and NHC ring-expanded products were isolated and characterised via solid-state and solution NMR spectroscopy and X-ray diffraction. In general, we observed B-B bond and C-N bond activation at low temperature for B2eg2, at room temperature for B2neop2 and at higher temperature for B2cat2. The reactivity strongly depends on steric effects of the NHCs and the diboron(4) compounds, as well as on the corresponding Lewis-basicity and Lewis-acidity. Our results provide profound insight into the chemistry of these diboron(4) reagents with the nowadays ubiquitous NHCs, the stability of the corresponding NHC adducts and on B-B bond activation using Lewis-bases in general. We demonstrate that B-B bond activation may be triggered even at temperatures as low as -40 °C to -30 °C without any metal species involved. For example, the reactions of B2eg2 with sterically less demanding NHCs such as Me2ImMe and iPr2Im in solution led to the corresponding ring-expanded products at low temperatures. Furthermore, boronium [L2B(OR)2]+ and borenium [LB(OR)2]+ cations have been observed from the reaction of the bis-borate B2eg3 with the NHCs iPr2Im and Me2ImMe, which led to the conclusion that the activation of bis-borates with NHCs (or Lewis-bases in general) might be a facile and simple route to access such species.

N-Heterocyclic Carbene Stabilized Boryl Radicals.

The reaction of the 2-(trimethylsilyl)imidazolium triflate 9 with diarylboron halides (4-R-C6 H4 )2 BX (R=H, X=Br; R=CH3 , X=Cl; R=CF3 , X=Cl) afforded the NHC-stabilized borenium cations 10 a-c. Cyclic voltammetry revealed a linear correlation between the Hammett parameter σp of the para substituent and the half-wave potential. Chemical reduction with decamethylcobaltocene, [(C5 Me5 )2 Co], furnished the corresponding radicals 11 a-c; their characterization by EPR spectroscopy confirmed the paramagnetic character of 11 a-c, with large hyperfine coupling constants to the boron isotopes 11 B and 10 B, while delocalization of the unpaired electron into the NHC is negligible. DFT calculations of the percentage of spin density distribution between the carbene (NHC) and the boryl fragments (BR2 ) revealed for 11 a-c a spin density ratio (BR2 /NHC) of ca. 9:1, which underlines their distinct boryl radical character. The molecular structure of the most stable species 11 c was established by X-ray diffraction analysis.

[(NHC)Cu(I)-ER3] Complexes (ER3 = SiMe2Ph, SiPh3, SnMe3): From Linear, Mononuclear Complexes to Polynuclear Complexes with Ultrashort Cu(I)···Cu(I) Distances.

A series of complexes of the type [(NHC)Cu-ER3] (NHC = IDipp, IMes, ItBu, Me2IMe, and ER3 = SiMe2Ph, SiPh3, SnMe3) and [(NHC)Cu-R'] (NHC = IDipp, Me2IMe and R' = Ph, C≡CPh) was synthesized in good yields by the reaction of the corresponding [(NHC)Cu-OtBu] complex with the respective silylborane pinB-ER3 (pin = OCMe2CMe2O; ER3 = SiMe2Ph, SiPh3), the stannylborane ((C2H4)(iPrN)2)B-SnMe3, or a boronic acid ester pinB-R' (R' = Ph, C≡CPh). Solid structures of all complexes were systematically studied by X-ray diffraction analysis. The solid state structures of the complexes [(NHC)Cu-ER3] show a dependence of the structural motif from the steric properties of the NHC ligand. The sterically demanding NHC ligands (IDipp, IMes, ItBu) lead to monomeric, linear complexes [(NHC)Cu-ER3], while with the less demanding Me2IMe ligand, polynuclear, µ-ER3-bridged complexes with ultrashort Cu···Cu distances are observed. For the related complexes [(NHC)Cu-R'] no analogous complexes with bridging anionic ligands are realized. Instead, irrespective of the NHC ligand, linear coordinated copper complexes of different types are formed. (29)Si heteronuclear solution NMR spectroscopic data on [(NHC)Cu(I)-SiR3] exhibit distinctly different chemical shifts for the (in the solid state) monomeric and dimeric complexes suggesting different structure types also in solution. This agrees well with the observation of a trinuclear complex [(Me2IMe)Cu-SnMe3]3 both in the solid state and in solution. Initial catalytic studies suggest that [(NHC)Cu-OtBu] complexes (NHC = ItBu, Me2IMe) are, in addition to the established [(IDipp)Cu-OtBu] complex, efficient precatalysts for the silylation of aldehydes and α,ß-unsaturated ketones with pinB-SiMe2Ph.

RheoStim: Development of an Adaptive Multi-Sensor to Prevent Venous Stasis.

Chronic venous insufficiency of the lower limbs is often underestimated and, in the absence of therapy, results in increasingly severe complications, including therapy-resistant tissue defects. Therefore, early diagnosis and adequate therapy is of particular importance. External counter pulsation (ECP) therapy is a method used to assist the venous system. The main principle of ECP is to squeeze the inner leg vessels by muscle contractions, which are evoked by functional electrical stimulation. A new adaptive trigger method is proposed, which improves and supplements the current therapeutic options by means of pulse synchronous electro-stimulation of the muscle pump. For this purpose, blood flow is determined by multi-sensor plethysmography. The hardware design and signal processing of this novel multi-sensor plethysmography device are introduced. The merged signal is used to determine the phase of the cardiac cycle, to ensure stimulation of the muscle pump during the filling phase of the heart. The pulse detection of the system is validated against a gold standard and provides a sensitivity of 98% and a false-negative rate of 2% after physical exertion. Furthermore, flow enhancement of the system has been validated by duplex ultrasonography. The results show a highly increased blood flow in the popliteal vein at the knee.

Synthesis, Structure, and Reactivity of Anionic sp(2) -sp(3) Diboron Compounds: Readily Accessible Boryl Nucleophiles.

Lewis base adducts of tetra-alkoxy diboron compounds, in particular bis(pinacolato)diboron (B2 pin2 ), have been proposed as the active source of nucleophilic boryl species in metal-free borylation reactions. We report the isolation and detailed structural characterization (by solid-state and solution NMR spectroscopy and X-ray crystallography) of a series of anionic adducts of B2 pin2 with hard Lewis bases, such as alkoxides and fluoride. The study was extended to alternative Lewis bases, such as acetate, and other diboron reagents. The B(sp(2) )-B(sp(3) ) adducts exhibit two distinct boron environments in the solid-state and solution NMR spectra, except for [(4-tBuC6 H4 O)B2 pin2 ](-) , which shows rapid site exchange in solution. DFT calculations were performed to analyze the stability of the adducts with respect to dissociation. Stoichiometric reaction of the isolated adducts with two representative series of organic electrophiles-namely, aryl halides and diazonium salts-demonstrate the relative reactivities of the anionic diboron compounds as nucleophilic boryl anion sources.

Luminescent copper(I) halide and pseudohalide phenanthroline complexes revisited: simple structures, complicated excited state behavior.

We have synthesized a series of luminescent trigonal [CuX(dtbphen)] (X = I (), Br (), Cl (), CN (), dtbphen = 2,9-di-tert-butylphenanthroline) and tetrahedral [Cu2(µ-I)2(L)2] (L = phenanthroline (), 2,9-dimethylphenanthroline ()) copper diimine complexes. Bearing in mind the chemical simplicity of this class of long-known Cu(i) phenanthroline compounds, it is surprising that they exhibit non-trivial photophysical properties, which have not been fully recognized. They display broad XMLCT absorption between ca. 450-600 nm, and the broad emission between ca. 550-850 nm in the solid state occurring with lifetimes on the µs timescale indicates phosphorescence, although the energetic overlap between excitation and emission suggests thermally activated delayed fluorescence (TADF) from S1. In line with the latter assumption, low temperature measurements of in the solid state show an energetic separation of emission and excitation. However, a counter-intuitive decrease of emission intensity and simultaneous increase of the emission lifetime at low temperatures are observed for , which indicates two triplet states also being involved. Our DFT and TD-DFT calculations show that emission from the lowest excited triplet state T1 is of (3)LMXCT nature, separated by only ca. 0.16 eV from S1. Low temperature photophysical measurements at 77 K in a glassy matrix of in 2-Me-THF and of in the solid state are in agreement with the theoretical results, revealing in addition that π-interactions in the solid state also greatly influence the photophysical properties, making a clear conclusion towards TADF ambiguous. This study suggests that other related simple and long-known Cu(i) systems may exhibit a similar, more complex excited state behavior than previously appreciated, involving several emitting states and important intermolecular interactions.

K-H3C and K-Sn interactions in potassium trimethylstannyl complexes: a structural, mechanochemical, and NMR study.

A series of trimethylstannyl potassium complexes [K(L)SnMe3] with different auxiliary ligands L (L = 18-C-6, (TMEDA)2 (TMEDA = tetramethylethylenediamine), and (12-C-4)2) were synthesized by alkoxide-induced B-Sn bond cleavage. X-ray structure determinations were performed for all these complexes, and the structural chemistry was studied in detail. For L = 18-C-6 and (TMEDA)2 the solid state structures comprise polymeric [K(L)SnMe3]n chains containing bidentate trimethylstannyl anions bridging two [K(L)](+) ions, featuring unsymmetrical coordination of the [K(L)](+) ion by K-Sn and K-H3C interactions as a central structural motif. In contrast, for L = (12-C-4)2, separated [K(12-C-4)2](+) and [SnMe3](-) ions are observed. Unexpectedly, in the presence of tetrahydrofuran (THF), [K(18-C-6)SnMe3]n forms upon crystallization a new species consisting of separated [K(18-C-6)(THF)2](+) and [(Me2SnCH3)K(18-C-6)SnMe3](-) ions. In this unsymmetrical anion two trimethylstannyl anions coordinate a single [K(18-C-6)](+) ion; one trimethylstannyl anion coordinates via a K-Sn interaction, and the second coordinates via a K-H3C interaction. Simulations of the mechanochemical properties (compliance constants) applying approximated density functional theory revealed that both interactions are very soft and are of comparable strength. Moreover, according to our gas phase simulations the unsymmetrically coordinated [(Me2SnCH3)K(18-C-6)SnMe3](-) is indeed thermodynamically favored over both possible symmetrical isomers with either K-Sn or K-H3C coordination. Furthermore, the existence of multiple species due to the two coordination modes and aggregates of [K(18-C-6)SnMe3] in solution is suggested by NMR spectroscopic studies using (1)H, NOESY/ROESY, and (1)H pulsed field gradient diffusion experiments.

Iron 10-thiacorroles: bioinspired iron(III) complexes with an intermediate spin (S=3/2) ground state.

A first systematic study upon the preparation and exploration of a series of iron 10-thiacorroles with simple halogenido (F, Cl, Br, I), pseudo-halogenido (N3 , I3 ) and solvent-derived axial ligands (DMSO, pyridine) is reported. The compounds were prepared from the free-base octaethyl-10-thiacorrole by iron insertion and subsequent ligand-exchange reactions. The small N4 cavity of the ring-contracted porphyrinoid results in an intermediate spin (i.s., S=3/2) state as the ground state for the iron(III) ion. In most of the investigated cases, the i.s. state is found unperturbed and independent of temperature, as determined by a combination of X-ray crystallography and magnetometry with (1) H NMR-, EPR-, and Mössbauer spectroscopy. Two exceptions were found. The fluorido iron(III) complex is inhomogenous in the solid and contains a thermal i.s. (S=3/2)→high spin (h.s., S=5/2) crossover fraction. On the other side, the cationic bis(pyridine) complex resides in the expected low spin (l.s., S=1/2) state. Chemically, the iron 10-thiacorroles differ from the iron porphyrins mainly by weaker axial ligand binding and by a cathodic shift of the redox potentials. These features make the 10-thiacorroles interesting ligands for future research on biomimetic catalysts and model systems for unusual heme protein active sites.