Hyaluronic acid/tannic acid films for wound healing application.

In this study, thin films based on hyaluronic acid (HA) with tannic acid (TA) were investigated in three different weight ratios (80HA/20TA, 50HA/50TA, 20HA/80TA) for their application as materials for wound healing. Surface free energy, as well as their roughness, mechanical properties, water vapor permeability rate, and antioxidant activity were determined. Moreover, their compatibility with blood and osteoblast cells was investigated. The irritation effect caused by hyaluronic acid/tannic acid films was also considered with the use of are constructed human epidermis model. The irritation effect for hyaluronic acid/tannic acid films by the in vitro method was also studied. The low surface free energy, surface roughness, and antioxidant activity presented by the obtained films were examined. All the tested compositions of hyaluronic acid/tannic acid films were hemocompatible, but only films based on 50HA/50TA were fully cytocompatible. Regarding the potential implantation, all the films except 80HA/20TA showed appropriate mechanical properties. The specimens did not exert the irritation effect during the studies involving reconstructed human epidermis.

Performance Analysis of Additively Manufactured Hydraulic Check Valves with Different Postprocessing.

Due to the need to use very precise manufacturing processes, hydraulic applications are one of the most demanding parts in production. Such a feature requires using molded and properly machined parts. On the other hand, such an approach makes hydraulic parts very heavy and requires the use of large amounts of material. One of the most promising manufacturing technologies that could be a real alternative to hydraulic parts production is additive manufacturing (AM). This paper aims to study how the AM process affects the performance properties of the as-built state, and investigate changes after different types of postprocessing in the case of hydraulic check valves. Based on the obtained results, using proper postprocessing is a crucial feature of obtaining check valves that perform their functions in a hydraulic system. In as-built parts, the surface roughness of the valve seats significantly exceeds the acceptable range (almost nine times-from 4.01 µm to 33.92 µm). The influence of the surface roughness of the valve seats was verified via opening pressure and internal leakage tests based on ISO standards. The opening pressures in all tested samples were similar to those in the conventionally made counterparts, but in the case of internal leakage only a fully finished AM valve revealed promising results. The obtained results could be useful for various enterprises that are seeking weight reduction possibilities for their low-volume manufactured products.

Recycling of Tire-Derived Fiber: The Contribution of Steel Cord on the Properties of Lightweight Concrete Based on Perlite Aggregate.

The increasing amount of waste from the vulcanization industry has become a serious environmental challenge. Even the partial reuse of the steel contained in tires as dispersed reinforcement in the production of new building materials may contribute to reducing the environmental impact of this industry while supporting the principle of sustainable development. In this study, the concrete samples were made of Portland cement, tap water, lightweight perlite aggregates, and steel cord fibers. Two different addition of steel cord fibers (1.3% and 2.6% wt. of concrete, respectively) were used. The samples of lightweight concrete based on perlite aggregate with steel cord fiber addition showed a significant increase in compressive (18-48%), tensile (25-52%), and flexural strength (26-41%). Moreover, higher thermal conductivity and thermal diffusivity were reported after incorporating steel cord fibers into the concrete matrix; however, the specific heat values decreased after these modifications. The highest values of thermal conductivity and thermal diffusivity were obtained for samples modified with a 2.6% addition of steel cord fibers and were equal to 0.912 ± 0.002 W/mK and 0.562 ± 0.002 µm2/s, respectively. Maximum specific heat, on the other hand, was reported for plain concrete (R)-1.678 ± 0.001 MJ/m3 K.

Erythromycin Scavenging from Aqueous Solutions by Zeolitic Materials Derived from Fly Ash.

Erythromycin (EA) is an antibiotic whose concentration in water and wastewater has been reported to be above the standard levels. Since the methods used so far to remove EA from aquatic environments have not been effective, the development of effective methods for EA removal is necessary. In the present study, fly ash (FA)-based zeolite materials, which have not been investigated as EA sorbents before, were used. The possibilities of managing waste FA and using its transformation products for EA sorption were presented. The efficiency of EA removal from experimental solutions and real wastewater was evaluated. In addition, the sorbents' mineral composition, chemical composition, and physicochemical properties and the effects of adsorbent mass, contact time, initial EA concentration, and pH on EA removal were analyzed. The EA was removed within the first 2 min of the reaction with an efficiency of 99% from experimental solutions and 94% from real wastewater. The maximum adsorption capacities were 314.7 mg g-1 for the fly ash-based synthetic zeolite (NaP1_FA) and 363.0 mg g-1 for the carbon-zeolite composite (NaP1_C). A fivefold regeneration of the NaP1_FA and NaP1_C showed no significant loss of adsorption efficiency. These findings indicate that zeolitic materials effectively remove EA and can be further investigated for removing other pharmaceuticals from water and wastewater.

Wear Analysis of Additively Manufactured Slipper-Retainer in the Axial Piston Pump.

Additive manufacturing (AM) of spare parts is going to become more and more common. In the case of hydraulic solutions, there are also some applications of AM technology related to topological optimization, anti-cavitation improvements, etc. An examination of all available research results shows that authors are using specialized tools and machines to properly prepare AM spare parts. The main aim of this paper is to analyze the influence of quick repair of the damaged slipper-retainer from an axial piston pump by using an AM spare part. Hence, it was prepared with a 100-h test campaign of the AM spare part, which covers the time between damage and supply of the new pump. The material of the slipper-retainer has been identified and replaced by another material-available as a powder for AM, with similar properties as the original. The obtained spare part had been subjected to sandblasting only to simulate extremely rough conditions, directly after the AM process and an analysis of the influence of the high surface roughness of AM part on wear measurements. The whole test campaign has been divided into nine stages. After each stage, microscopic measurements of the pump parts' surface roughness were made. To determine roughness with proper measurements, a microscopical investigation was conducted. The final results revealed that it is possible to replace parts in hydraulic pumps with the use of AM. The whole test campaign caused a significant increase in the surface roughness of the pump's original parts, which was worked with the AM spare slipper-retainer: (1) from Ra = 0.54 µm to Ra = 3.84 µm in the case of two tested pistons; (2) from Ra = 0.33 µm to Ra = 1.98 µm in the case of the slipper-retainer. Despite significant increases in the surface roughness of the pump's parts, the whole test campaign has been successfully finished without any damages to the other important parts of the whole hydraulic test rig.

Rehydration Driven Acid Impregnation of Thermally Pretreated Ca-Bentonite-Evolution of the Clay Structure.

A new approach to acid activation of raw Ca-bentonite was explored. The method consisted in dehydration of clay by thermal pretreatment at 200 °C, followed by immediate impregnation with H2SO4 solution. The acid concentration was 1.5 × or 2.0 × cation exchange capacity (CEC) of clay. The volume of the liquid was adjusted so as to leave the material in the apparently dry state. Structural evolution of the activated solids after 1, 2, 3, and 4 weeks of storage was monitored with X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), 27Al magic angle spinning nuclear magnetic resonance (MAS NMR), and chemical analysis. In the macroscopically dry solids, the rehydrated interlayer Ca2+ underwent rapid exchange with H3O+ and formed extra-framework gypsum. Acid attack on montmorillonite structure resulted in continuous removal of layer forming Mg, Al, and Fe cations, with Mg2+ being eliminated most efficiently. No significant damage to the montmorillonite lattice was observed. Al was extracted both from the tetrahedral and the octahedral sheets. Under less acidic conditions, the monohydrated H-montmorillonite changed upon storage to bi-hydrated form, as a result of clay auto-transformation. Higher concentrations of acid in the pore network of clay stabilized the H-form of montmorillonite. The data indicate that compositional transformation of acid impregnated bentonite extended beyond the one month of aging investigated in the present work.

Rehydration Driven Na-Activation of Bentonite-Evolution of the Clay Structure and Composition.

A new method of Na-activation of raw bentonite, rich in Ca-montmorillonite, consisting of combined thermal treatment at 200 °C, followed by immediate impregnation with aqueous solution of Na2CO3 of concentration corresponding to 0.5, 1.0, 1.5, or 2.0 cation exchange capacity (CEC) of clay, was investigated. Structural and compositional evolution of the activated solids after 1, 2, 3, and 4 weeks of storage was monitored by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). XRD analysis indicated that within the investigated period of ageing transformation to Na-rich montmorillonite required Na2CO3 concentration of at least 1.0 CEC. FTIR spectra showed that, depending on the Na2CO3 concentration and ageing time, formation of Na-rich montmorillonite was accompanied by precipitation of poorly crystalline calcite, amorphous calcium carbonate, gaylussite (a double calcium-sodium carbonate), and portlandite (Ca(OH)2).

Three-Stage Membrane Treatment of Wastewater from Biodiesel Production-Preliminary Research.

As biodiesel production as renewable fuel increases, so does the amount of wastewater resulting from this technology. Wastewater is generated during the so-called biodiesel washing, i.e., washing out glycerol and methanol with water. The purified biodiesel must meet international standards, such as EN 14214 or the American ASTM D6751 standard. To fully say that biodiesel technology is environmentally friendly, the amount of wastewater should be minimized. It is also desirable that the purified water can be recycled to the technology. For this purpose, wastewater pre-treated by flotation, during which mainly oils are removed, was subjected to three-stage membrane separation. For each of the stages, the membrane was selected and characterized in terms of its separation capacity and stream stability. Starting with microfiltration, which was mainly aimed at reducing turbidity, affects the permeate flux in the following steps. Then, ultrafiltration and nanofiltration membranes were selected. These membranes were aimed at reducing the concentration of inorganic and organic substances. Consequently the cascade was composed of: MF-0.45 µm, UF-150 kDa, and NF-characterized by an 80% degree of desalination. The final permeate has a salt concentration of less than 0.15 g/L and can be reused in biodiesel technology.

Influence of Dry Milling on Phase Transformation of Sepiolite upon Alkali Activation: Implications for Textural, Catalytic and Sorptive Properties.

Activation of natural sepiolite by means of grinding in a planetary mill followed by wet NaOH activation was studied for the purpose of endowing the product with enhanced basicity for potential catalytic/sorptive applications. Synthesized solids were characterized with X-ray powder diffraction (XRD), N2 adsorption/desorption, scanning electron microscopy (SEM), energy dispersive (EDX), atomic absorption (AAS), Fourier-transform infrared (FTIR) and 29Si magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopies. Surface basicity was determined by titration with benzoic acid. Grinding changed the pathway of sepiolite phase transformation upon NaOH treatment. The as-received sepiolite evolved to Na-sepiolite (loughlinite) with a micropore system blocked by nanocrystalline Mg(OH)2, while ground samples yielded magnesium silicate hydrate phase (MSH), with well-developed microporous texture. In unmilled sepiolite desilication involved preferential leaching of Si from the center of the structural ribbons, while in ground samples additional loss of Si from ribbon-ribbon corner linkages was observed. In all cases treatment with NaOH led to enhancement of surface basicity. Synthesized materials were tested as catalysts in a base-catalyzed aldol self-condensation of acetone and oxidation of cyclohexanone to ε-caprolactone, as well as CO2 sorbents. Catalytic trends depended not only on samples' basicity, but also on texture and phase composition of the catalysts. Grinding combined with alkali activation proved a simple and effective method for boosting CO2-sorption capacity of sepiolite to the level comparable to amine-functionalized, acid-activated sepiolite sorbents.

Structural Transformations of Hydrolysates Obtained from Ti-, Zr-, and Ti, Zr-Solutions Used for Clay Pillaring: Towards Understanding of the Mixed Pillars Nature.

Structural characteristics of hydrolysates formed from the aqueous Ti-, Zr-, and Ti, Zr-pillaring solutions prepared from inorganic precursors (TiCl4 and ZrOCl2), was investigated and compared with that of precipitates obtained from the same solutions after a slight alkalization of pH to the values reported for the conditions of clay pillaring. The materials were recovered by lyophilization and subsequently subjected to calcination at 500, 800 and 1000 °C. Of special interest was the effect of pH on the possible formation of mixed Ti, Zr-oxide species. Powder X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscope/energy dispersive spectrometer (SEM/EDS) analysis showed that even a relatively moderate alteration of pH in Ti-, Zr-, or Ti, Zr-precursor solutions caused substantial changes in the outcome of hydrolytic transformations, manifested by different phase and/or chemical composition of the resulting hydrolysates. Analysis of thermal evolution of hydrolysates showed that alkalization facilitated the transformation of anatase into rutile in materials obtained from Ti-pillaring solution, but retarded tetragonal to monoclinic zirconia conversion in samples derived from Zr-pillaring agent. The most striking effect was observed for the mixed Ti, Zr-pillaring solution, where an increase of pH enabled the formation of zirconium titanate as the only crystalline phase, rather than a multiphase mixture of anatase, monoclinic zirconia and zirconium titanate obtained from the more acidic precursor. The finding supports the model of mixed Ti-O-Zr network in props generated in Ti, Zr-pillared montmorillonites.

Air pollution control and flue gas desulfurization residues from Polish copper smelting facility as adsorbents of Pb(II) and Cu(II) from aqueous solutions.

This study aimed at evaluation of air pollution control residues (APCR) and flue gas desulfurization residues (FGDR) from copper foundry in Southwestern Poland as adsorbents of Cu(II) and Pb(II) from simulated wastewater. Studies of the impact of pH and adsorbent dose, as well as sorption isotherms, and kinetic and thermodynamic studies were conducted in a series of batch experiments. The maximum adsorption capacities were equal to 42.9 mg g-1 Cu(II) and 124.4 mg g-1 Pb(II) for APCR and 98.8 mg g-1 Cu(II) and 124.7 mg g-1 Pb(II) for FGDR, which was comparable to mineral adsorbents examined in other studies. Adsorption isotherms followed the Langmuir model, except for Pb(II) for FGDR, which followed Freundlich model. Sorption kinetics for both materials was properly expressed by pseudo-second-order equation. Mean adsorption energy parameter suggested that the adsorption might have occurred via physical bonding. Thermodynamic study revealed that adsorption was spontaneous and endothermic for Cu(II) and not spontaneous and exothermic for Pb(II), with lower temperature favoring the process. The results suggested that both materials had high affinity towards Cu(II) and Pb(II) ions and could be conducted industrial scale research for consideration as potential adsorbents from aqueous solutions.

Different effects of FK506, rapamycin, and mycophenolate mofetil on glucose-stimulated insulin release and apoptosis in human islets.

Pancreatic islet transplantation has the potential to be an effective treatment for type 1 diabetes mellitus. While recent improvements have improved 1-year outcomes, follow-up studies show a persistent loss of graft function/survival over 5 years. One possible cause of islet transplant failure is the immunosuppressant regimen required to prevent alloimmune graft rejection. Although there is evidence from separate studies, mostly in rodents and cell lines, that FK506 (tacrolimus), rapamycin (sirolimus), and mycophenolate mofetil (MMF; CellCept) can damage pancreatic beta-cells, there have been few side-by-side, multiparameter comparisons of the effects of these drugs on human islets. In the present study, we show that 24-h exposure to FK506 or MMF impairs glucose-stimulated insulin secretion in human islets. FK506 had acute and direct effects on insulin exocytosis, whereas MMF did not. FK506, but not MMF, impaired human islet graft function in diabetic NOD*scid mice. All of the immunosuppressants tested in vitro increased caspase-3 cleavage and caspase-3 activity, whereas MMF induced ER-stress to the greatest degree. Treating human islets with the GLP-1 agonist exenatide ameliorated the immunosuppressant-induced defects in glucose-stimulated insulin release. Together, our results demonstrate that immunosuppressants impair human beta-cell function and survival, and that these defects can be circumvented to a certain extent with exenatide treatment.

Caveolin-3 is adjacent to a group of extradyadic ryanodine receptors.

Caveolae are present in almost all cells and concentrate a wide variety of signaling molecules, receptors, transporters, and ion pumps. We have investigated the distribution of the ryanodine receptor, the Na(+)/Ca(2+) exchanger, the predominant Na(+) channel isoform rH1, and the L-type calcium channel, Ca(v)1.2, relative to the muscle-specific caveolin isoform, caveolin-3, in adult rat ventricular myocytes. Three-dimensional immunofluorescence images were deconvolved and analyzed. Caveolin-3 colocalizes with all of these molecules at the surface of the cell, but there is no significant colocalization between caveolin-3 and either the Na(+)/Ca(2+) exchanger or the Na(+) channel in the cell interior. The distribution of the surface colocalization indicates that the caveolae that colocalize with each molecule form distinct populations. This organization indicates that there are multiple populations of caveolae separable by location and occupants. In the interior of the cell, caveolin-3 shows a marked colocalization with a population of ryanodine receptors that are separate from those within the dyad. Because of their location, the signaling molecules contained within these caveolae may have preferred access to the neighboring nondyadic ryanodine receptors.

The molecular architecture of calcium microdomains in rat cardiomyocytes.

We have used standard indirect immunofluorescence techniques in combination with wide-field microscopy and image deconvolution to assess the distribution of proteins implicated in excitation-contraction coupling and Ca(2+) homeostasis in adult rat cardiomyocytes. We begin by discussing our earlier results and summarizing what is known about the molecular architecture of this species to provide a rationale for the work presented here. The previous results showed that the dyads contain Ca(2+) channels and ryanodine receptors, but few Na(+) channels or Na(+)/Ca(2+) exchangers. The latter proteins were not colocalized elsewhere on the membrane, and we have now found that they appear to be minimally associated with caveolin-3. None of the molecules examined are distributed uniformly in the membranes in which they are located but are organized into discrete clusters attached to the underlying cytoskeleton, an arrangement that, at the level of light microscopy, does not appear to be affected by the enzymatic dissociation used to study single cells. Analysis of how the clusters are organized and distributed throughout the volume of the cell suggests that there may be differences in excitation-contraction coupling between the cell surface and the interior.