RESUMO
Exploring inexpensive and high-performance nonprecious metal catalysts (NPMCs) to replace the rare and expensive Pt-based catalyst for the oxygen reduction reaction (ORR) is crucial for future low-temperature fuel cell devices. Herein, we developed a new type of highly efficient 3D porous Fe/N/C electrocatalyst through a simple pyrolysis approach. Our systematic study revealed that the pyrolysis temperature, the surface area, and the Fe content in the catalysts largely affect the ORR performance of the Fe/N/C catalysts, and the optimized parameters have been identified. The optimized Fe/N/C catalyst, with an interconnected hollow and open structure, exhibits one of the highest ORR activity, stability and selectivity in both alkaline and acidic conditions. In 0.1 M KOH, compared to the commercial Pt/C catalyst, the 3D porous Fe/N/C catalyst exhibits â¼6 times better activity (e.g., 1.91 mA cm-2 for Fe/N/C vs 0.32 mA cm-2 for Pt/C, at 0.9 V) and excellent stability (e.g., no any decay for Fe/N/C vs 35 mV negative half-wave potential shift for Pt/C, after 10000 cycles test). In 0.5 M H2SO4, this catalyst also exhibits comparable activity and better stability comparing to Pt/C catalyst. More importantly, in both alkaline and acidic media (RRDE environment), the as-synthesized Fe/N/C catalyst shows much better stability and methanol tolerance than those of the state-of-the-art commercial Pt/C catalyst. All these make the 3D porous Fe/N/C nanostructure an excellent candidate for non-precious-metal ORR catalyst in metal-air batteries and fuel cells.
RESUMO
Direct growth of multigrain platinum nanowires on sulfur-doped graphene (PtNW/SG) is reported. The growth mechanism, including Pt nanoparticle nucleation on SG, followed by nanoparticle attachment with orientation along the <111> direction is highlighted. PtNW/SG demonstrates improved Pt mass and specific activity compared with commercial catalysts toward oxygen reduction, in addition to dramatically improved stability through accelerated durability testing.
RESUMO
Encapsulation of Pt nanoparticles (NPs) in a zirconia nanocage by area-selective atomic layer deposition (ALD) can significantly enhance both the Pt stability and activity. Such encapsulated Pt NPs show 10 times more stability than commercial Pt/C catalysts and an oxygen reduction reaction (ORR) activity 6.4 times greater than that of Pt/C.