The microbial impact on the sorption behaviour of selenite in an acidic, nutrient-poor boreal bog.

(79)Se is among the most important long lived radionuclides in spent nuclear fuel and selenite, SeO3(2-), is its typical form in intermediate redox potential. The sorption behaviour of selenite and the bacterial impact on the selenite sorption in a 7-m-deep profile of a nutrient-poor boreal bog was studied using batch sorption experiments. The batch distribution coefficient (Kd) values of selenite decreased as a function of sampling depth and highest Kd values, 6600 L/kg dry weight (DW), were observed in the surface moss and the lowest in the bottom clay at 1700 L/kg DW. The overall maximum sorption was observed at pH between 3 and 4 and the Kd values were significantly higher in unsterilized compared to sterilized samples. The removal of selenite from solution by Pseudomonas sp., Burkholderia sp., Rhodococcus sp. and Paenibacillus sp. strains isolated from the bog was affected by incubation temperature and time. In addition, the incubation of sterilized surface moss, subsurface peat and gyttja samples with added bacteria effectively removed selenite from the solution and on average 65% of selenite was removed when Pseudomonas sp. or Burkholderia sp. strains were used. Our results demonstrate the important role of bacteria for the removal of selenite from the solution phase in the bog environment, having a high organic matter content and a low pH.

Factors affecting the sorption of cesium in a nutrient-poor boreal bog.

(135)Cs is among the most important radionuclides in the long-term safety assessments of spent nuclear fuel, due to its long half-life of 2.3 My and large inventory in spent nuclear fuel. Batch sorption experiments were conducted to evaluate the sorption behavior of radiocesium ((134)Cs) in the surface moss, peat, gyttja, and clay layers of 7-m-deep profiles taken from a nutrient-poor boreal bog. The batch distribution coefficient (Kd) values of radiocesium increased as a function of sampling depth. The highest Kd values, with a geometric mean of 3200 L/kg dry weight (DW), were observed in the bottom clay layer and the lowest in the 0.5-1.0 m peat layer (50 L/kg DW). The maximum sorption in all studied layers was observed at a pH between 7 and 9.5. The in situ Kd values of (133)Cs in surface Sphagnum moss, peat and gyttja samples were one order of magnitude higher than the Kd values obtained using the batch method. The highest in situ Kd values (9040 L/kg DW) were recorded for the surface moss layer. The sterilization of fresh surface moss, peat, gyttja and clay samples decreased the sorption of radiocesium by 38%, although the difference was not statistically significant. However, bacteria belonging to the genera Pseudomonas, Paenibacillus, Rhodococcus and Burkholderia isolated from the bog were found to remove radiocesium from the solution under laboratory conditions. The highest biosorption was observed for Paenibacillus sp. V0-1-LW and Pseudomonas sp. PS-0-L isolates. When isolated bacteria were added to sterilized bog samples, the removal of radiocesium from the solution increased by an average of 50% compared to the removal recorded for pure sterilized peat. Our results demonstrate that the sorption of radiocesium in the bog environment is dependent on pH and the type of the bog layer and that common environmental bacteria prevailing in the bog can remove cesium from the solution phase.

Sorption of radioiodide in an acidic, nutrient-poor boreal bog: insights into the microbial impact.

Batch sorption experiments were conducted to evaluate the sorption behaviour of iodide and the microbial impact on iodide sorption in the surface moss, subsurface peat, gyttja, and clay layers of a nutrient-poor boreal bog. The batch distribution coefficient (Kd) values of iodide decreased as a function of sampling depth. The highest Kd values, 4800 L/Kg dry weight (DW) (geometric mean), were observed in the fresh surface moss and the lowest in the bottom clay (geometric mean 90 mL/g DW). In the surface moss, peat and gyttja layers, which have a high organic matter content (on average 97%), maximum sorption was observed at a pH between ∼ 4 and 5 and in the clay layer at pH 2. The Kd values were significantly lower in sterilized samples, being 20-fold lower than the values found for the unsterilized samples. In addition, the recolonization of sterilized samples with a microbial population from the fresh samples restored the sorption capacity of surface moss, peat and gyttja samples, indicating that the decrease in the sorption was due to the destruction of microbes and supporting the hypothesis that microbes are necessary for the incorporation of iodide into the organic matter. Anoxic conditions reduced the sorption of iodide in fresh, untreated samples, similarly to the effect of sterilization, which supports the hypothesis that iodide is oxidized into I2/HIO before incorporation into the organic matter. Furthermore, the Kd values positively correlated with peroxidase activity in surface moss, subsurface peat and gyttja layers at +20 °C, and with the bacterial cell counts obtained from plate count agar at +4 °C. Our results demonstrate the importance of viable microbes for the sorption of iodide in the bog environment, having a high organic matter content and a low pH.

Evaluation of biodegradation of nonylphenol ethoxylate and lignin by combining toxicity assessment and chemical characterization.

The aerobic biodegradation of commercial nonylphenol ethoxylate (NPE) mixture and alkali lignin was studied using the OECD headspace test accompanied by the simultaneous measurement of ecotoxicity directly from the biodegradation liquors and by the follow-up of the chemical composition of the studied chemicals. NPE degradation was dependent on the inoculum source: approximately 40% of NPE was mineralized into CO(2) during the 4-week experiment when inoculum from Helsinki City wastewater treatment plant (WWTP) was used, and only 12% was mineralized when inoculum from Jyväskylä City WWTP was used. Chemical analyses revealed a shift in the ethoxylate chain length from longer to shorter soon after the beginning of the NPE biodegradation tests. At the same time also toxicity (reverse electron transport assay, RET) and estrogenic activity (human estrogen receptor yeast) measured directly from the biodegradation liquors decreased. In case of alkali lignin, approximately 11% was mineralized in the test and chemical analysis showed in maximum a 30% decrease in lignin concentration. Toxicity of lignin biodegradation liquors started to decrease in the beginning of the test, but became more toxic towards the end of the test again. Especially RET assay proved to be sensitive enough for measuring toxicity changes directly from biodegradation liquors, although a concentrating treatment of the liquors is recommended for a more detailed characterization and identification of toxic metabolites.

Effect of strength training session on plasma amino acid concentration following oral ingestion of arginine or taurine in men.

This study examined the acute effects of a one-hour hypertrophic strength training session (STS) on plasma amino acid concentration following oral ingestion of arginine or taurine in nine physically active men participating in a double-blind and randomised experiment. The subjects took placebo, arginine or taurine capsules (50 mg/kg) in either rest (REST) or STS condition. Blood samples were taken before and at 30, 60, 90, and 120 min after the beginning of the treatment and assayed for plasma amino acids with HPLC. There was a significant interaction effect with STS and sample time for both arginine and taurine in the raw data (p < 0.05). The modelled polynomial data for the arginine treatment showed that the peak concentration of arginine occurred at 69 min at rest and at 104 min in STS, and for the taurine treatment, the peak concentration of taurine occurred at 89 min at rest and at 112 min in STS. In conclusion, one hour of hypertrophic STS slows the increase in the peak concentration of plasma arginine and taurine after oral ingestion of the respective amino acids.

Protein metabolism and strength performance after bovine colostrum supplementation.

This study was designed to determine the responses of muscle protein, serum amino acids, and strength performance to bovine colostrum supplementation in physically active men. The rest (R) group (n = 6) and the exercise (E) group (n = 6) carried out twice a 2-week experiment randomly assigned in a double-blind fashion with either placebo (PLA; consuming daily 20 g maltodextrin) or bovine colostrum (COL; consuming daily 20 g colostrum supplement) treatment with one month between. On the test day after the treatment period the measurements were carried out in fasting conditions and E carried out a strength training session (STS). The methods involved the infusion of ring-(2)H(5)-phenylalanine, femoral arterial and venous blood sampling, and biopsies from the vastus lateralis muscle. Serum concentration of essential amino acids during recovery was greater (p < 0.05) in the COL groups compared with the PLA groups. Both muscle protein synthesis and breakdown increased (p < 0.05) with COL. There were no differences in phenylalanine net balance or strength performance between the PLA and COL groups. It was concluded that a 2-week supplementation with bovine colostrum in physically active men increases serum concentration of essential amino acids but has no effect either on strength performance or protein net balance in fasting conditions during recovery after STS.

Pyrolysis of humic acids from digested and composted sewage sludge

Humic acids (HAs) were extracted from four digested sewage sludge samples composted for four months, one, two and four years. HAs were pyrolyzed at three different temperatures applying both conventional and in situ methylation (ISM) pyrolysis. The pyrolysates were analyzed using gas chromatography-mass spectrometry (GC/MS). Derivatization (ISM) and pyrolysis temperature had dramatic effects on the composition and relative amounts of the pyrolysates. Among the derivatized HA fragments aliphatic compounds prevailed under all the pyrolysis conditions tested. Aromatic substances consisting mainly of guaiacyl-type compounds were detected in higher abundances only at elevated temperatures. Without ISM the contribution of aromatic structures to the total pyrogram was considerably greater than that of the aliphatics. Increase of the pyrolysis temperature from 450 degrees C to 600 degrees C had smaller effect on the proportions and composition of the compounds studied than increase from 350 degrees C to 450 degrees C.

Pyrolysis-GC-MS and CuO-oxidation-HPLC in the characterization of HMMs from sediments and surface waters downstream of a pulp mill.

High molecular mass fractions of lignin and humic compounds in sediments and waters downstream of a pulp mill were characterized applying pyrolysis-gas chromatography-mass spectrometry. The results were compared to those obtained using reversed phase HPLC on the cupric oxide oxidation products. The chromatographic data of both pyrolysis and cupric oxide oxidation were also subjected to the principal component analysis (PCA). The sediment samples and fractions obtained by ultrafiltration of river water samples were freeze dried prior to characterization. The sediment samples were also extracted using 2 M sodium hydroxide solution. The extracts were ultrafiltrated, freeze dried and compared to the freeze dried original sediments using the procedures mentioned above. The amounts of HMMs obtained from the sediments ranged from 62 mg to 97 mg per one gram of sediment. Gel permeation chromatography was applied to samples obtained from sediments by extraction with tetrahydrofuran. The weight average molecular weights of these fractions were in the range of 1500-2300 amu.

Identification of fish species by reversed-phase high-performance liquid chromatography with photodiode-array detection.

A method for the separation of sarcoplasmic fish proteins by RP-HPLC is described. The procedure revealed significant differences useful for reliable identification of fish species. Sixteen of the most common Finnish freshwater fish species were differentiated by species-specific HPLC chromatograms obtained using photodiode-array detection (PAD) at 200-350 nm. The analytical column was a Hi-Pore RP-304 reversed-phase column. The separation was performed by a linear gradient of acetonitrile and water with a small amount of trifluoracetic acid (TFA). Star-symbol plots were constructed from the chromatograms to visualize the data. Clearly different HPLC protein profiles for most fish species were obtained. The chromatograms of salmonoids show similarities, whereas the protein profiles of cyprinids are dissimilar. Minor intraspecific differences were obtained for three types of powan (Coregonus lavaretus).

Characterization of the humic material formed by composting of domestic and industrial biowastes. Part 1. HPLC of the cupric oxide oxidation products from humic acids.

The changes induced by humification of anaerobically digested sewage sludge, source separated biowaste, and pulp mill biosludge were determined by extracting the fractions of bitumen and humic and fulvic acids from the samples of fresh and humified composts. In all cases, a distinct decrease in the amount of bitumen could be detected during humification. The amount of humic acids increased in sewage sludge and biowaste samples, but decreased in pulp mill biosludge sample during humification. The humic acids were degraded by CuO oxidation and the phenolic degradation products were analysed by reversed-phase high-performance liquid chromatography. The yield of these aromatic degradation products was in the range 0.9-2.0% for each sample. The main phenolic degradation products were 4-hydroxybenzoic acid, vanillic acid, 4-hydroxybenzaldehyde, vanillin, syringaldehyde, and acetovanillone. Two lignin dimers, dehydrodivanillin and dehydrodiacetovanillone, were also identified.

Pyrolysis products of PCBs.

Model compound studies which were previously done for impurities and environmental residues of chlorophenols and for wastes of chlorination processes were extended to the impurities and pyrolysis products of polychlorinated biphenyls (PCBs). Model compounds were commercial products or synthesized and their structures proven by spectroscopic methods. These models were used as analytical reference substances in GC/ECD and GC/MS studies of the pyrolyzed PCB samples. In addition to previously known neutral components like polychlorinated dibenzofurans (PCDFs), chlorophenolic substances, especially polychlorophenols (PCPs) and polychlorinated biphenylols (PCB-OHs) were observed as major pyrolysis products of PCBs. Capacitor fires are suggested to produce in many cases chlorophenols which are major toxic hazards to people.

The mutagenicity of some edible mushrooms in the Ames test.

The mutagenic activity of five wild and two cultivated species of edible mushrooms was studied in the Ames Salmonella/microsome test system. The wild mushrooms tested were four species of the genus Lactarius (L. necator, L. torminosus, L. helvus and L. rufus) and bolete (Boletus edulis). The cultivated species were champignon (Agaricus bisporus) and shiitake (Lentinus edodes). All the mushrooms were mutagenic to tester strains sensitive to base-pair substitution mutagens, and L. necator, L. rufus and B. edulis also had some frameshift activity. Metabolic activation was not required and the mutagenic activity could be detected even in boiled mushroom extracts. After fractionation with organic solvents (ethanol followed by diethyl ether) the activity was recovered in the ether phase as well as the aqueous phase in the case of L. necator, but remained in the aqueous phase of the A. bisporus and Lentinus edodes extracts.

Thin-layer chromatography of chlorinated catechols.

The thin-layer chromatography of catechol and six chlorinated catechols has been studied on five adsorbents. Acetic acid in the developing solvent was essential for the production of sharp zones. The best separation of the individual compounds occurred on alumina, whereas silica gel appeared to be good for group separation (clean-up) from other compounds.