Recycling of municipal solid waste incinerator fly ash by using hydrocyclone separation.

The municipal solid waste incinerators (MSWIs) in Taiwan generate about 300,000 tons of fly ash annually, which is mainly composed of calcium and silicon compounds, and has the potential for recycling. However, some heavy metals are present in the MSWI fly ash, and before recycling, they need to be removed or reduced to make the fly ash non-hazardous. Accordingly, the purpose of this study was to use a hydrocyclone for the separation of the components of the MSWI fly ash in order to obtain the recyclable portion. The results show that chloride salts can be removed from the fly ash during the hydrocyclone separation process. The presence of a dense medium (quartz sand in this study) is not only helpful for the removal of the salts, but also for the separation of the fly ash particles. After the dense-medium hydrocyclone separation process, heavy metals including Pb and Zn were concentrated in the fine particles so that the rest of the fly ash contained less heavy metal and became both non-hazardous and recyclable.

Effects of sintering atmosphere on cement clinkers produced from chromium-bearing sludge.

The purpose of this study was to investigate the effects of sintering atmosphere (oxidizing and reducing) on the polymorphs of dicalcium silicates (Ca2SiO4, C2S) and on the chromium leaching of the belite-rich clinkers made from a chromium-bearing sludge. This sludge was generated in an electroplating factory, and in addition to chromium, it contained nickel, copper and zinc. In the clinker production, air was used as the oxidizing atmosphere, and carbon monoxide, which was produced by burning graphite with an insufficient amount of oxygen, was employed as the reducing atmosphere. Dicalcium silicates were substantially formed under both kinds of sintering atmosphere, but there was some nonhydraulic gamma-C2S in the clinkers produced under the oxidizing atmosphere. In addition, the amount of gamma-C2S decreased with the chromium-bearing sludge addition, whereas that of beta-C2S increased. The clinkers produced under the reducing atmosphere had less residual chromium, a finding that shows that more chromium was evaporated. However, the reducing atmosphere can decrease the proportion of hexavalent chromium (Cr(VI)) in the resulting clinkers. For other heavy metals, the residual amounts of nickel and copper generally increased with the sludge addition, but zinc was absent in most of the clinkers produced under the reducing atmosphere. This implies that the evaporation of zinc is much more significant than that of the other heavy metals under a reducing atmosphere. In the leaching tests, the concentrations of nickel, copper, and zinc were below the detection limits in all the leachates. In terms of chromium, the total leaching concentration was highly related to Cr(VI). The clinkers produced under the oxidizing atmosphere had high leaching concentrations of chromium, and thus failed to meet the regulatory limit. In contrast, the reducing atmosphere was effective in decreasing the chromium leaching, and it therefore makes the resulting cement clinkers more environmentally sound.

Hydration and leaching characteristics of cement pastes made from electroplating sludge.

The purpose of this study was to investigate the hydration and leaching characteristics of the pastes of belite-rich cements made from electroplating sludge. The compressive strength of the pastes cured for 1, 3, 7, 28, and 90 days was determined, and the condensation of silicate anions in hydrates was examined with the (29)Si nuclear magnetic resonance (NMR) technology. The leachabilities of the electroplating sludge and the hardened pastes were studied with the multiple toxicity characteristic leaching procedure (MTCLP) and the tank leaching test (NEN 7345), respectively. The results showed that the electroplating sludge continued to leach heavy metals, including nickel, copper, and zinc, and posed a serious threat to the environment. The belite-rich cement made from the electroplating sludge was abundant in hydraulic ß-dicalcium silicate, and it performed well with regard to compressive-strength development when properly blended with ordinary Portland cements. The blended cement containing up to 40% the belite-rich cement can still satisfy the compressive-strength requirements of ASTM standards, and the pastes cured for 90 days had comparable compressive strength to an ordinary Portland cement paste. It was also found that the later hydration reaction of the blended cements was relatively more active, and high fractions of belite-rich cement increased the chain length of silicate hydrates. In addition, by converting the sludge into belite-rich cements, the heavy metals became stable in the hardened cement pastes. This study thus indicates a viable alternative approach to dealing with heavy metal bearing wastes, and the resulting products show good compressive strength and heavy-metal stability.

Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture.

The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10% desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.

Absolute frequency measurement of rubidium 5S-7S two-photon transitions with a femtosecond laser comb.

The absolute frequencies of rubidium 5S-7S two-photon transitions at 760 nm are measured to an accuracy of 20 kHz with an optical frequency comb based on a mode-locked femtosecond Ti:sapphire laser. The rubidium 5S-7S two-photon transitions are potential candidates for frequency standards and serve as important optical frequency standards for telecommunication applications. The accuracy of the hyperfine constant of the 7S1/2 state is improved by a factor of 5 in comparison with previous results.

Iodine stabilization of a diode laser in the optical communication band.

The iodine molecule has frequently been used as a frequency reference from the green to the near-infrared wavelength region (500-900 nm). We describe the frequency locking of the second-harmonic signal of a 197.2-THz (1520.25-nm) distributed-feedback diode laser to the absorption lines of the iodine hyperfine structure; a frequency jitter below 0.1 MHz was achieved at a 300-ms time constant. This scheme provides a simple, compact, and high-performance frequency reference in the optical communication band.

Observation of rubidium 5S1/2 --> 7S1/2 two-photon transitions with a diode laser.

The 5S1/2 --> 7S1/2 two-photon transition of atomic rubidium, which is 100 times weaker than the 5S-5D transition, is observed with an extended-cavity diode laser and a vapor cell. Signals with a signal-to-noise ratio of 280 are obtained with a laser power of 10 mW, and the observed linewidth is 3 MHz. The laser wavelength is 760 nm and is locked on the transitions to a stability of 2 x 10(-11). For the first time to our knowledge, the isotope shift of this transition is measured to be 130(4) MHz in atomic frequency.