Directed patterning of the self-assembled silk-elastin-like nanofibers using a nanomechanical stimulus.

We investigate the effects of the frequency and density of a nanomechanical stimulus on nucleation and growth of silk-elastin-like protein polymer (SELP) nanofibers. Repetitive tappings are crucial to create nucleation areas and a potential molecular level mechanism was proposed. Using this technique mechanically guided nanofiber patterns were successfully created.

Alignment of SWNTs by protein-ligand interaction of functionalized magnetic particles under low magnetic fields.

Carbon nanotubes (CNTs) have attracted considerable attention for applications using their superior mechanical, thermal and electrical properties. A simple method to controllably align single-walled CNTs (SWNTs) by using magnetic particles embedded with superparamagnetic iron oxide as an accelerator under the magnetic field was developed. The functionalization of SWNTs using biotin, interacted with streptavidin-coupled magnetic particles (micro-to-nano in diameter), and layer-by-layer assembly were performed for the alignment of a particular direction onto the clean silicon and the gold substrate at very low magnetic forces (0.02-0.89 T) at room temperature. The successful alignment of the SWNTs with multi-layer film was observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). By changing the orientation and location of the substrates, crossed-networks of SWNTs-magnetic particle complex could easily be fabricated. We suggest that this approach, which consists of a combination of biological interaction among streptavidin-biotin and magnetite particles, should be useful for lateral orientation of individual SWNTs with controllable direction.

Vertical alignment of carbon nanotubes using the magneto-evaporation method.

We developed a novel method of vertical alignment of SWNTs using a single-step process for the simultaneous vertical alignment of the SWNTs by a magnetic field and the fixation of their alignment by means of the direct evaporation of the films. We fabricated Fe-oxide/SWNT samples that are reacted by iron-oleate complex, oleic acid and cut SWNTs in 1-octadecene. The Fe-oxide/SWNT samples are dispersed in N,N-dimethylformamide and the resulting solution was deposited on an ITO glass substrate using the spraying method with magnetic field. After evaporation of the SWNT solution in the presence of a magnetic field, we transferred the nanotubes to the vacuum-evaporator chamber, and titanium is evaporated by e-beam evaporation to hold the vertical alignment of the SWNTs. The resulting SWNTs exhibit the formation of a high degree of vertically aligned SNWTs over a large area. We showed that the degree of orientation of the SWNTs is strongly influenced by the field strength, film thickness of the evaporating molecules and evaporating rates. This technique takes significant advantages of the alignment of SWNTs with high aspect ratio at room temperature, without any organic binders and without the need for further alignment procedures. Moreover, this method might be applicable to other anisotropic materials with high aspect ratio.

Photoluminescence properties of a perfluorinated supramolecular columnar liquid crystal with a pyrene core: effects of the ordering and orientation of the columns.

We investigated the effects of the alignment and ordering of pi-conjugated perfluorinated dendrimers containing pyrene moieties in their cores on their photoluminescence (PL) properties. The pyrene molecules are stacked in columns surrounded by aromatic and semifluorinated tails, which can be conjugated and act as chromophores. Polarized light microscopy (PLM), cross-sectional scanning electron microscopy (SEM), and atomic force microscopy (AFM) results show that variation of the cooling rate of the dendrimers produces variation in their orientation and ordering: Slow cooling (approximately <0.5 degrees C/min) of the isotropic melt in a sandwich glass cell results in a high degree of ordering and the vertical alignment of the columns on the substrate, in which the stacked pyrene molecules are oriented parallel to the surface over large areas. In contrast, rapid cooling (approximately >10 degrees C/min) leads to the planar alignment of the columns with significant disorder on the same substrate. UV-vis, PL, SEM, and AFM results show that the quenched columns with a planar orientation produce a broad emission band and a second weak shoulder, which indicates the presence of isolated molecules. However, the high degree of ordering of the columns with a vertical alignment produces a red-shift in the PL spectrum, with very few isolated molecules. By comparing two films with different alignments but similar ordering, we show that the ordering of this material has a greater influence on the PL spectrum than the alignment. This effect of the ordering of the columns was further verified by comparing the optical properties of the isolated dendrimers with those of small pi-conjugated molecules in solution and solid films.

Patterning of single-wall carbon nanotubes via a combined technique (chemical anchoring and photolithography) on patterned substrates.

Single-walled carbon nanotubes (SWNTs) have been chemically attached with high density onto a patterned substrate. To form the SWNT pattern, the substrate was treated with acid-labile group protected amine, and an amine prepattern was formed using a photolithographic process with a novel polymeric photoacid generator (PAG). The polymeric PAG contains a triphenylsulfonium salt on its backbone and was synthesized to obtain a PAG with enhanced efficiency and ease of spin-coating onto the amine-modified glass substrate. The SWNT monolayer pattern was then formed through the amidation reaction between the carboxylic acid groups of carboxylated SWNTs (ca-SWNTs) and the prepatterned amino groups. A high-density multilayer was fabricated via further repeated reaction between the carboxylic acid groups of the ca-SWNTs and the amino groups of the linker with the aid of a condensation agent. The formation of covalent amide bonding was confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Scanning electron microscopy and UV-vis-near-IR results show that the patterned SWNT films have uniform coverage with high surface density. Unlike previously reported patterned SWNT arrays, this ca-SWNT patterned layer has high surface density and excellent surface adhesion due to its direct chemical bonding to the substrate.

Covalent attachment and hybridization of DNA oligonucleotides on patterned single-walled carbon nanotube films.

DNA oligonucleotides were covalently immobilized to prepatterned single-walled carbon nanotube (SWNT) multilayer films by amidation. SWNT multilayer films were constructed via consecutive condensation reactions creating stacks of functionalized SWNT layers linked together by 4,4'-oxydianiline. Aminated- or carboxylated-DNA oligonucleotides were covalently immobilized to the respective carboxylated or aminated SWNT multilayer films through amide bond formation using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride. UV-vis-NIR spectroscopic analysis indicated that the SWNT film surface density increased uniformly according to the number of reaction cycles. Scanning electron microscopy and contact angle measurements of the SWNT multilayer film revealed a uniform coverage over the substrate surface. The covalent attachment of DNA oligonucleotides to the SWNT multilayer films and their subsequent hybridization with complementary oligonucleotides were verified using X-ray photoelectron spectroscopy and fluorescence-based measurements. This is the first report demonstrating that DNA oligonucleotides can be covalently attached to immobilized SWNT multilayer films. The anchored DNA oligonucleotides were shown to exhibit excellent specificity, realizing their potential in future biosensor applications.