In Vitro Evaluation of Pore Size Graded Bone Scaffolds with Different Material Composition.

The demand for biomimetic and biocompatible scaffolds in equivalence of structure and material composition for the regeneration of bone tissue is relevantly high. This article is investigating a novel three-dimensional (3D) printed porous structure called bone bricks with a gradient pore size mimicking the structure of the bone tissue. Poly-ɛ-caprolactone (PCL) combined with ceramics such as hydroxyapatite (HA), ß-tricalcium phosphate (TCP), and bioglass 45S5 were successfully mixed using a melt blending method and fabricated with the use of screw-assisted extrusion-based additive manufacturing system. Bone bricks containing the same material concentration (20 wt%) were biologically characterized through proliferation and differentiation tests. Scanning electron microscopy (SEM) was used to investigate the morphology of cells on the surface of bone bricks, whereas energy dispersive X-ray (EDX) spectroscopy was used to investigate the element composition on the surface of the bone bricks. Confocal imaging was used to investigate the number of differentiated cells on the surface of bone bricks. Proliferation results showed that bone bricks containing PCL/HA content are presenting higher proliferation properties, whereas differentiation results showed that bone bricks containing PCL/Bioglass 45S5 are presenting higher differentiation properties. Confocal imaging results showed that bone bricks containing PCL/Bioglass 45S5 are presenting a higher number of differentiated cells on their surface compared with the other material contents.

Rhabdomyosarcoma: Current Therapy, Challenges, and Future Approaches to Treatment Strategies.

Rhabdomyosarcoma is a rare cancer arising in skeletal muscle that typically impacts children and young adults. It is a worldwide challenge in child health as treatment outcomes for metastatic and recurrent disease still pose a major concern for both basic and clinical scientists. The treatment strategies for rhabdomyosarcoma include multi-agent chemotherapies after surgical resection with or without ionization radiotherapy. In this comprehensive review, we first provide a detailed clinical understanding of rhabdomyosarcoma including its classification and subtypes, diagnosis, and treatment strategies. Later, we focus on chemotherapy strategies for this childhood sarcoma and discuss the impact of three mechanisms that are involved in the chemotherapy response including apoptosis, macro-autophagy, and the unfolded protein response. Finally, we discuss in vivo mouse and zebrafish models and in vitro three-dimensional bioengineering models of rhabdomyosarcoma to screen future therapeutic approaches and promote muscle regeneration.

The detection and full genomic characterization of domestic cat Orthohepadnaviruses from Türkiye.

BACKGROUND: Domestic cat hepadnaviruses (DCHs) have been described as a novel virus that can infect cats. OBJECTIVE: The aim of our study is the first identification and molecular characterizations of DCH infection in Turkish domestic cats. METHODS: The blood, organ and ascites fluid samples from 550 cats were randomly sampled. The presence of DCH nucleic acid was investigated by using both in the literature and newly designed primers. RESULTS: It was found that the hepadnavirus positivity rate is 4% (22/550) in Türkiye. The full genomic characterization was performed on 13 of 22 samples, and others were characterized as nearly full genome. In this study, we highlight that whole blood samples should be also screened for DCH, not only serum samples as has frequently been done in other studies. DCH-infected cats were also found positive (54.54%, 12/22) for Feline leukaemia virus infection. BLAST results revealed that Turkish DCHs have 86.32%-99.08% homology with strains in the GenBank database, enabling us to construct phylogenetic trees. CONCLUSIONS: According to this study's results, it is suggested that this infection should be added to veterinary diagnostic panels worldwide. Additionally, we suggest that our new synthesized primers for the amplification of X gene can also be used for diagnosis.

Embedded 3D Printing of Cryogel-Based Scaffolds.

Cryogel-based scaffolds have attracted great attention in tissue engineering due to their interconnected macroporous structures. However, three-dimensional (3D) printing of cryogels with a high degree of precision and complexity is a challenge, since the synthesis of cryogels occurs under cryogenic conditions. In this study, we demonstrated the fabrication of cryogel-based scaffolds for the first time by using an embedded printing technique. A photo-cross-linkable gelatin methacryloyl (GelMA)-based ink composition, including alginate and photoinitiator, was printed into a nanoclay-based support bath. The layer-by-layer extruded ink was held in complex and overhanging structures with the help of pre-cross-linking of alginate with Ca2+ present in the support bath. The printed 3D structures in the support bath were frozen, and then GelMA was cross-linked at a subzero temperature under UV light. The printed and cross-linked structures were successfully recovered from the support bath with an integrated shape complexity. SEM images showed the formation of a 3D printed scaffold where porous GelMA cryogel was integrated between the cross-linked alginate hydrogels. In addition, they showed excellent shape recovery under uniaxial compression cycles of up to 80% strain. In vitro studies showed that the human fibroblast cells attached to the 3D printed scaffold and displayed spread morphology with a high proliferation rate. The results revealed that the embedded 3D printing technique enables the fabrication of cytocompatible cryogel based scaffolds with desired morphology and mechanical behavior using photo-cross-linkable bioink composition. The properties of the cryogels can be modified by varying the GelMA concentration, whereby various shapes of scaffolds can be fabricated to meet the specific requirements of tissue engineering applications.

3D bioprinting of tyramine modified hydrogels under visible light for osteochondral interface.

Recent advancements in tissue engineering have demonstrated a great potential for the fabrication of three-dimensional (3D) tissue structures such as cartilage and bone. However, achieving structural integrity between different tissues and fabricating tissue interfaces are still great challenges. In this study, anin situcrosslinked hybrid, multi-material 3D bioprinting approach was used for the fabrication of hydrogel structures based on an aspiration-extrusion microcapillary method. Different cell-laden hydrogels were aspirated in the same microcapillary glass and deposited in the desired geometrical and volumetric arrangement directly from a computer model. Alginate and carboxymethyl cellulose were modified with tyramine to enhance cell bioactivity and mechanical properties of human bone marrow mesenchymal stem cells-laden bioinks. Hydrogels were prepared for extrusion by gelling in microcapillary glass utilizing anin situcrosslink approach with ruthenium (Ru) and sodium persulfate photo-initiating mechanisms under visible light. The developed bioinks were then bioprinted in precise gradient composition for cartilage-bone tissue interface using microcapillary bioprinting technique. The biofabricated constructs were co-cultured in chondrogenic/osteogenic culture media for three weeks. After cell viability and morphology evaluations of the bioprinted structures, biochemical and histological analyses, and a gene expression analysis for the bioprinted structure were carried out. Analysis of cartilage and bone formation based on cell alignment and histological evaluation indicated that mechanical cues in conjunction with chemical cues successfully induced MSC differentiation into chondrogenic and osteogenic tissues with a controlled interface.

Design and 3D Printing of Personalized Hybrid and Gradient Structures for Critical Size Bone Defects.

Treating critical-size bone defects with autografts, allografts, or standardized implants is challenging since the healing of the defect area necessitates patient-specific grafts with mechanically and physiologically relevant structures. Three-dimensional (3D) printing using computer-aided design (CAD) is a promising approach for bone tissue engineering applications by producing constructs with customized designs and biomechanical compositions. In this study, we propose 3D printing of personalized and implantable hybrid active scaffolds with a unique architecture and biomaterial composition for critical-size bone defects. The proposed 3D hybrid construct was designed to have a gradient cell-laden poly(ethylene glycol) (PEG) hydrogel, which was surrounded by a porous polycaprolactone (PCL) cage structure to recapitulate the anatomical structure of the defective area. The optimized PCL cage design not only provides improved mechanical properties but also allows the diffusion of nutrients and medium through the scaffold. Three different designs including zigzag, zigzag/spiral, and zigzag/spiral with shifting the zigzag layers were evaluated to find an optimal architecture from a mechanical point of view and permeability that can provide the necessary mechanical strength and oxygen/nutrient diffusion, respectively. Mechanical properties were investigated experimentally and analytically using finite element analysis (FEA), and computational fluid dynamics (CFD) simulation was used to determine the permeability of the structures. A hybrid scaffold was fabricated via 3D printing of the PCL cage structure and a PEG-based bioink comprising a varying number of human bone marrow mesenchymal stem cells (hBMSCs). The gradient bioink was deposited inside the PCL cage through a microcapillary extrusion to generate a mineralized gradient structure. The zigzag/spiral design for the PCL cage was found to be mechanically strong with sufficient and optimum nutrient/gas axial and radial diffusion while the PEG-based hydrogel provided a biocompatible environment for hBMSC viability, differentiation, and mineralization. This study promises the production of personalized constructs for critical-size bone defects by printing different biomaterials and gradient cells with a hybrid design depending on the need for a donor site for implantation.

Accelerated Degradation of Poly-ε-caprolactone Composite Scaffolds for Large Bone Defects.

This research investigates the accelerated hydrolytic degradation process of both anatomically designed bone scaffolds with a pore size gradient and a rectangular shape (biomimetically designed scaffolds or bone bricks). The effect of material composition is investigated considering poly-ε-caprolactone (PCL) as the main scaffold material, reinforced with ceramics such as hydroxyapatite (HA), ß-tricalcium phosphate (TCP) and bioglass at a concentration of 20 wt%. In the case of rectangular scaffolds, the effect of pore size (200 µm, 300 µm and 500 µm) is also investigated. The degradation process (accelerated degradation) was investigated during a period of 5 days in a sodium hydroxide (NaOH) medium. Degraded bone bricks and rectangular scaffolds were measured each day to evaluate the weight loss of the samples, which were also morphologically, thermally, chemically and mechanically assessed. The results show that the PCL/bioglass bone brick scaffolds exhibited faster degradation kinetics in comparison with the PCL, PCL/HA and PCL/TCP bone bricks. Furthermore, the degradation kinetics of rectangular scaffolds increased by increasing the pore size from 500 µm to 200 µm. The results also indicate that, for the same material composition, bone bricks degrade slower compared with rectangular scaffolds. The scanning electron microscopy (SEM) images show that the degradation process was faster on the external regions of the bone brick scaffolds (600 µm pore size) compared with the internal regions (200 µm pore size). The thermal gravimetric analysis (TGA) results show that the ceramic concentration remained constant throughout the degradation process, while differential scanning calorimetry (DSC) results show that all scaffolds exhibited a reduction in crystallinity (Xc), enthalpy (Δm) and melting temperature (Tm) throughout the degradation process, while the glass transition temperature (Tg) slightly increased. Finally, the compression results show that the mechanical properties decreased during the degradation process, with PCL/bioglass bone bricks and rectangular scaffolds presenting higher mechanical properties with the same design in comparison with the other materials.

Design and bioprinting for tissue interfaces.

Tissue interfaces include complex gradient structures formed by transitioning of biochemical and mechanical properties in micro-scale. This characteristic allows the communication and synchronistic functioning of two adjacent but distinct tissues. It is particularly challenging to restore the function of these complex structures by transplantation of scaffolds exclusively produced by conventional tissue engineering methods. Three-dimensional (3D) bioprinting technology has opened an unprecedented approach for precise and graded patterning of chemical, biological and mechanical cues in a single construct mimicking natural tissue interfaces. This paper reviews and highlights biochemical and biomechanical design for 3D bioprinting of various tissue interfaces, including cartilage-bone, muscle-tendon, tendon/ligament-bone, skin, and neuro-vascular/muscular interfaces. Future directions and translational challenges are also provided at the end of the paper.

3D printed scaffold design for bone defects with improved mechanical and biological properties.

Bone defect treatment is still a challenge in clinics, and synthetic bone scaffolds with adequate mechanical and biological properties are highly needed. Adequate waste and nutrient exchange of the implanted scaffold with the surrounded tissue is a major concern. Moreover, the risk of mechanical instability in the defect area during regular activity increases as the defect size increases. Thus, scaffolds with better mass transportation and mechanical properties are desired. This study introduces 3D printed polymeric scaffolds with a continuous pattern, ZigZag-Spiral pattern, for bone defects treatments. This pattern has a uniform distribution of pore size, which leads to uniform distribution of wall shear stress which is crucial for uniform differentiation of cells attached to the scaffolds. The mechanical, mass transportation, and biological properties of the 3D printed scaffolds are evaluated. The results show that the presented scaffolds have permeability similar to natural bone and, with the same porosity level, have higher mechanical properties than scaffolds with conventional lay-down patterns 0-90° and 0-45°. Finally, human mesenchymal stem cells are seeded on the scaffolds to determine the effects of geometrical microstructure on cell attachment and morphology. The results show that cells in scaffold with ZigZag-Spiral pattern infilled pores gradually, while the other patterns need more time to fill the pores. Considering mechanical, transportation, and biological properties of the considered patterns, scaffolds with ZigZag-Spiral patterns can mimic the properties of cancellous bones and be a better choice for treatments of bone defects.

Bone Bricks: The Effect of Architecture and Material Composition on the Mechanical and Biological Performance of Bone Scaffolds.

Large bone loss injuries require high-performance scaffolds with an architecture and material composition resembling native bone. However, most bone scaffold studies focus on three-dimensional (3D) structures with simple rectangular or circular geometries and uniform pores, not able to recapitulate the geometric characteristics of the native tissue. This paper addresses this limitation by proposing novel anatomically designed scaffolds (bone bricks) with nonuniform pore dimensions (pore size gradients) designed based on new lay-dawn pattern strategies. The gradient design allows one to tailor the properties of the bricks and together with the incorporation of ceramic materials allows one to obtain structures with high mechanical properties (higher than reported in the literature for the same material composition) and improved biological characteristics.

3D Fiber Reinforced Hydrogel Scaffolds by Melt Electrowriting and Gel Casting as a Hybrid Design for Wound Healing.

Emerging biomanufacturing technologies have revolutionized the field of tissue engineering by offering unprecedented possibilities. Over the past few years, new opportunities arose by combining traditional and novel fabrication techniques, shaping the hybrid designs in biofabrication. One of the potential application fields is skin tissue engineering, in which a combination of traditional principles of wound dressing with advanced biofabrication methods could yield more efficient therapies. In this study, a hybrid design of fiber-reinforced scaffolds combined with gel casting is developed and the efficiency for in vivo wound healing applications is assessed. For this purpose, 3D fiber meshes produced by melt electrowriting are selectively filled with photocrosslinkable gelatin hydrogel matrices loaded with different growth factor carrier microspheres. Additionally, the influence of the inclusion of inorganic bioactive glass particles within the composite fibrous mesh is evaluated. Qualitative evaluation of secondary wound healing criteria and histological analysis shows that hybrid scaffolds containing growth factors and bioactive glass enhances the healing process significantly, compared to the designs merely providing a fiber-reinforced bioactive hydrogel matrix as the wound dressing. This study aims to explore a new application area for melt electrowriting as a powerful tool in fabricating hybrid therapeutic designs for skin tissue engineering.

Novel 3D Bioglass Scaffolds for Bone Tissue Regeneration.

The design of scaffolds with optimal biomechanical properties for load-bearing applications is an important topic of research. Most studies have addressed this problem by focusing on the material composition and not on the coupled effect between the material composition and the scaffold architecture. Polymer-bioglass scaffolds have been investigated due to the excellent bioactivity properties of bioglass, which release ions that activate osteogenesis. However, material preparation methods usually require the use of organic solvents that induce surface modifications on the bioglass particles, compromising the adhesion with the polymeric material thus compromising mechanical properties. In this paper, we used a simple melt blending approach to produce polycaprolactone/bioglass pellets to construct scaffolds with pore size gradient. The results show that the addition of bioglass particles improved the mechanical properties of the scaffolds and, due to the selected architecture, all scaffolds presented mechanical properties in the cortical bone region. Moreover, the addition of bioglass indicated a positive long-term effect on the biological performance of the scaffolds. The pore size gradient also induced a cell spreading gradient.

Bisulfite-initiated crosslinking of gelatin methacryloyl hydrogels for embedded 3D bioprinting.

Recent studies on three-dimensional (3D) bioprinting of cell-laden gelatin methacryloyl (GelMA) hydrogels have provided promising outcomes for tissue engineering applications. However, the reliance on the use of photo-induced gelation processes for the bioprinting of GelMA and the lack of an alternative crosslinking process remain major challenges for the fabrication of cell-laden structures. Here, we present a novel crosslinking approach to form cell-laden GelMA hydrogel constructs through 3D embedded bioprinting without using any external irradiation that could drastically affect cell viability and functionality. This approach consists of a one-step type of crosslinking via bisulfite-initiated radical polymerization, which is combined with embedded bioprinting technology to improve the structural complexity of printed structures. By this means, complex-shaped hydrogel bio-structures with cell viability higher than 90% were successfully printed within a support bath including sodium bisulfite. This study offers an important alternative to other photo-induced gelation processes to improve the bio-fabrication of GelMA hydrogel with high cell viability.

Exploiting Urazole's Acidity for Fabrication of Hydrogels and Ion-Exchange Materials.

In this study, the acidity of urazole (pKa 5-6) was exploited to fabricate a hydrogel in two simple and scalable steps. Commercially available poly(hexamethylene)diisocyanate was used as a precursor to synthesize an urazole containing gel. The formation of urazole was confirmed by FT-IR and 1H-NMR spectroscopy. The hydrogel was characterized by microscopy imaging as well as spectroscopic and thermo-gravimetric analyses. Mechanical analysis and cell viability tests were performed for its initial biocompatibility evaluation. The prepared hydrogel is a highly porous hydrogel with a Young's modulus of 0.91 MPa, has a swelling ratio of 87%, and is capable of exchanging ions in a medium. Finally, a general strategy was demonstrated to embed urazole groups directly into a crosslinked material.

3D bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments.

Three-dimensional (3D) bioprinting is an additive manufacturing process in which the combination of biomaterials and living cells, referred to as a bioink, is deposited layer-by-layer to form biologically active 3D tissue constructs. Recent advancements in the field show that the success of this technology requires the development of novel biomaterials or the improvement of existing bioinks. Polyethylene glycol (PEG) is one of the well-known synthetic biomaterials and has been commonly used as a photocrosslinkable bioink for bioprinting; however, other types of cell-friendly crosslinking mechanisms to form PEG hydrogels need to be explored for bioprinting and tissue engineering. In this work, we proposed micro-capillary based bioprinting of a novel molecularly engineered PEG-based bioink that transiently incorporates low molecular weight gelatin (LMWG) fragments. The rheological properties and release profile of the LMWG fragments were characterized, and their presence during hydrogel formation had no effect on the swelling ratio or sol fraction when compared to PEG hydrogels formed without the LMWG fragments. For bioprinting, PEG was first functionalized with cell-adhesive RGD ligands and was then crosslinked using protease-sensitive peptides via a Michael-type addition reaction inside the micro-capillary. The printability was assessed by the analysis of extrudability, shape fidelity, and printing accuracy of the hydrogel filaments after the optimization of the gelation conditions of the PEG-based bioink. The LMWG fragments supplemented into the bioink allowed the extrusion of smooth and uniform cylindrical strands of the hydrogel and improved shape fidelity and printing accuracy. Encapsulated cells in both bioprinted and non-bioprinted PEG-based hydrogels showed high viability and continued to proliferate over time in culture with a well-defined cell morphology depending on the presence of the cell adhesive peptide RGD. The presented micro-capillary based bioprinting process for a novel PEG-based bioink can be promising to construct complex 3D structures with micro-scale range and spatiotemporal variations without using any cytotoxic photoinitiator, UV light, or polymer support.

Manganese-Doped Calcium Silicate Nanowire Composite Hydrogels for Melanoma Treatment and Wound Healing.

Melanoma is a serious malignant skin tumor. Effectively eliminating melanoma and healing after-surgical wounds are always challenges in clinical studies. To address these problems, we propose manganese-doped calcium silicate nanowire-incorporated alginate hydrogels (named MCSA hydrogels) for in situ photothermal ablation of melanoma followed by the wound healing process. The proposed MCSA hydrogel had controllable gelation properties, reasonable strength, and excellent bioactivity due to the incorporated calcium silicate nanowires as the in situ cross-linking agents and bioactive components. The doping of manganese into calcium silicate nanowires gave them excellent photothermal effects for eradicating melanoma effectively under near infrared (NIR) irradiation. Moreover, the synergistic effect of manganese and silicon in the MCSA hydrogel effectively promotes migration and proliferation of vascular endothelial cells and promotes angiogenesis. Hence, such bifunctional bioactive hydrogels could achieve combined functions of photothermal therapy and wound healing, showing great promise for melanoma therapy and tissue regeneration.

Investigating the Influence of Architecture and Material Composition of 3D Printed Anatomical Design Scaffolds for Large Bone Defects.

There is a significant unmet clinical need to prevent amputations due to large bone loss injuries. We are addressing this problem by developing a novel, cost-effective osseointegrated prosthetic solution based on the use of modular pieces, bone bricks, made with biocompatible and biodegradable materials that fit together in a Lego-like way to form the prosthesis. This paper investigates the anatomical designed bone bricks with different architectures, pore size gradients, and material compositions. Polymer and polymer-composite 3D printed bone bricks are extensively morphological, mechanical, and biological characterized. Composite bone bricks were produced by mixing polycaprolactone (PCL) with different levels of hydroxyapatite (HA) and ß-tri-calcium phosphate (TCP). Results allowed to establish a correlation between bone bricks architecture and material composition and bone bricks performance. Reinforced bone bricks showed improved mechanical and biological results. Best mechanical properties were obtained with PCL/TCP bone bricks with 38 double zig-zag filaments and 14 spiral-like pattern filaments, while the best biological results were obtained with PCL/HA bone bricks based on 25 double zig-zag filaments and 14 spiral-like pattern filaments.

Molecular characterization of human adenoviruses associated with respiratory infection in Turkey.

Human adenoviruses (HAdVs) are responsible for various clinical diseases. Molecular epidemiological studies of respiratory HAdVs are limited in Turkey. To determine the main genotypes and epidemiological characteristics of HAdVs in patients with respiratory symptoms. HAdV PCR-positive extracts of nasal/nasopharyngeal specimens sent to the Turkish Public Health Institution from various cities of Turkey in 2015-2016 were investigated by seminested PCR. Partial sequence analysis of the hexon gene of HAdVs was performed. SPSSv.24.0 was used. A total of 23/68 (33.82%) HAdV-positive samples were amplified. Mastadenovirus B, C, D, and F were detected and mastadenovirus B (10/23; 43.5%) and C (10/23; 43.5%) were predominant strains. Interestingly, HAdV-F known to have gastrointestinal system tropism was detected in two patients with respiratory symptoms. HAdV-B3 was the most prevalent genotype (9/23; 39.1%). Also, HAdV-B7 is defined as a reemerging pathogen. It is noteworthy that there is a cluster of four HAdV-C strains showing a close paraphyletic relationship with HAdV-2/6 intertypic recombination. To our knowledge, this is the first study showing that HAdV-B7 reemerging pathogen circulating in patients with respiratory infections in our country. It is also necessary to emphasize that HAdV-2/6 recombinant strains were detected in this study for the first time in Turkey.

Realtime Localization and Estimation of Loads on Aircraft Wings from Depth Images.

This paper deals with the development of a realtime structural health monitoring system for airframe structures to localize and estimate the magnitude of the loads causing deflections to the critical components, such as wings. To this end, a framework that is based on artificial neural networks is developed where features that are extracted from a depth camera are utilized. The localization of the load is treated as a multinomial logistic classification problem and the load magnitude estimation as a logistic regression problem. The neural networks trained for classification and regression are preceded with an autoencoder, through which maximum informative data at a much smaller scale are extracted from the depth features. The effectiveness of the proposed method is validated by an experimental study performed on a composite unmanned aerial vehicle (UAV) wing subject to concentrated and distributed loads, and the results obtained by the proposed method are superior when compared with a method based on Castigliano's theorem.

Preparation and characterization of nanoclay-hydrogel composite support-bath for bioprinting of complex structures.

Three-dimensional bioprinting of cell-laden hydrogels in a sacrificial support-bath has recently emerged as a potential solution for fabricating complex biological structures. Physical properties of the support-bath strongly influence the bioprinting process and the outcome of the fabricated constructs. In this study, we reported the application of a composite Pluronic-nanoclay support-bath including calcium ions as the crosslinking agent for bioprinting of cell-laden alginate-based hydrogels. By tuning the rheological properties, a shear-thinning composite support-bath with fast self-recovery behavior was yielded, which allowed continuous printing of complex and large-scale structures. The printed structures were easily and efficiently harvested from the support-bath without disturbing their shape fidelity. Moreover, the results showed that support-bath assisted bioprinting process did not influence the viability of cells encapsulated within hydrogel. This study demonstrates that Pluronic-nanoclay support-bath can be utilized for bioprinting of complex, cell-laden constructs for vascular and other tissue engineering applications.