Directed Self-Assembly on Photo-Crosslinked Polystyrene Sub-Layers: Nanopattern Uniformity and Orientation.

A photo-crosslinked polystyrene (PS) thin film is investigated as a potential guiding sub-layer for polystyrene-block-poly (methyl methacrylate) block copolymer (BCP) cylindrical nanopattern formation via topographic directed self-assembly (DSA). When compared to a non-crosslinked PS brush sub-layer, the photo-crosslinked PS sub-layer provided longer correlation lengths of the BCP nanostructure, resulting in a highly uniform DSA nanopattern with a low number of BCP dislocation defects. Depending on the thickness of the sub-layer used, parallel or orthogonal orientations of DSA nanopattern arrays were obtained that covered the entire surface of patterned Si substrates, including both trench and mesa regions. The design of DSA sub-layers and guide patterns, such as hardening the sub-layer by photo-crosslinking, nano-structuring on mesas, the relation between trench/mesa width, and BCP equilibrium period, were explored with a view to developing defect-reduced DSA lithography technology.

CdS/C60 binary nanocomposite films prepared via phase transition of PS-b-P2VP block copolymer.

We demonstrate the well-defined control of phase transition of a polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer from spherical micelles to lamellar structures, in which CdS and C60 nanoparticles (NPs) are selectively positioned at the P2VP domains. The CdS NPs are in situ synthesized using PS-b-P2VP block copolymer templates that are self-assembled in PS-selective solvents. The CdS-PS-b-P2VP micellar structures are transformed to lamellar phase by adjusting a solvent selectivity for both blocks. In addition, a binary system of CdS/C60 embedded in PS-b-P2VP lamellar structures (CdS/C60-PS-b-P2VP) is fabricated by embedding C60 molecules into P2VP domain though charge-transfer complexation between pyridine units of PS-b-P2VP and C60 molecules. The CdS/C60-PS-b-P2VP nanostructured films are characterized by transmission electron microscopy (TEM) and UV-Vis spectrometer.

Molecular level ordering in poly(2-vinylpyridine).

The reaction between atactic poly(2-vinylpyridine) and 1,4-dibromobutane leads to formation of long-range 3D molecular ordering in polymer chains mainly because the side group (pyridine) of the polymer chain changes to a syndotactic configuration. This may enable the production of functional molecular devices that operate on a 3D atomic scale.

Effect of solvent composition on transformation of micelles to vesicles of rod-coil poly(n-hexyl isocyanate-block-2-vinylpyridine) diblock copolymers.

The self-aggregation behavior of an amphiphilic rod-coil block copolymer of poly(n-hexyl isocyanate-block-2-vinylpyridine) (PHIC(189)-b-P2VP(228)) (f(P2VP) = 0.78, M(n) = 24.5K) in a tetrahydrofuran (THF)/water system was examined using dynamic light scattering (DLS), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE-SEM). The presence of a certain amount of water in the THF-based polymer solution induced a morphological transition from spherical solid micelles to open mouth platelike vesicles. The size of the aggregates increased with an increase in water content in the mixed solvent of THF/water. In the range of 30-40% water, the polymer formed vesicles with an interdigitated architecture of poly(n-hexyl isocyanate) (PHIC) at the center of the membrane and with the poly(2-vinylpyridine) (P2VP) block forming the outer layers and pointing toward the solvent. However, at higher water contents, the thickness of the bilayer increased due to the rearrangement of the vesicle membrane from a flip-flop to a lamellar architecture. After the degradation of the PHIC from the vesicles at basic pH, hollow spherical aggregates remained stable. After removing the THF from the mixed solvent using dialysis, large-sized compound vesicles were formed.

Fabrication of Pt/Au concentric spheres from triblock copolymer.

Dispersion of an aqueous H(2)PtCl(6) solution into a trifluorotoluene (TFT) solution of a polystyrene-block-poly(2-vinylpyridine)-block-poly(ethylene oxide) (PS-b-P2VP-b-PEO) triblock copolymer produced an emulsion-induced hollow micelle (EIHM), comprising a water nanodroplet stabilized by PEO, H(2)PtCl(6)/P2VP, and PS, sequentially. The following addition of an aqueous LiAuCl(4) solution into the dispersion led to a coordination of LiAuCl(4) and PEO. The resulting spherical EIHM structure was transformed to a hollow cylindrical micelle by the fusion of spherical EIHM with the addition of methanol. This structural transition was reversible by the alternative addition of methanol and TFT. Oxygen plasma was used to generate Pt/Au concentric spheres and hollow cylindrical Pt/Au nano-objects.

Au/CdS Hybrid Nanoparticles in Block Copolymer Micellar Shells.

A polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) micellar structure with a P2VP core containing 5 nm CdS nanoparticles (NPs) and a PS shell formed in toluene that is a good solvent for PS block undergoes the core-shell inversion by excess addition of methanol that is a good solvent for P2VP block. It leads to the formation of micellar shell-embedded CdS NPs in the methanol major phase. The spontaneous crystalline growth of Au NPs on the CdS surfaces positioned at micellar shells without a further reduction process is newly demonstrated. The nanostructure of Au/CdS/PS-b-P2VP hybrid NPs is confirmed by transmission electron microscopy, energy-dispersive X-ray, and UV-Vis absorption.

The fabrication of nanopatterns with Au nanoparticles-embedded micelles via nanoimprint lithography.

We fabricated nanopatterns with Au nanoparticles-embedded micelles (Au-micelles) by self-assembly of block copolymers via nanoimprint lithography. The micelle structure prepared by self-assembled block copolymers was used as a template for the synthesis of Au nanoparticles (Au NPs). Au NPs were synthesized in situ inside the micelles of polystyrene-block-poly(2-vinylpyridine) (PS- b-P2VP). Au-micelles were arranged on the trenches of the polymer template, which was imprinted by nanoimprint lithography. The fabrication of line-type and dot-type nanopatterns was carried out by the combined method. In addition, multilayer nanopatterns of the Au-micelles were also proposed.

Reversibly interchangeable, chain-wrapped micelles and vesicles of an amphiphilic rod-coil block copolymer.

The rod-like chains wrap tangentially to the curved interface of the spherical cores of the rod-coil micelles and vesicles that are reversibly interchangeable by varying the polymer concentration.

Formation of intermicellar-chained and cylindrical micellar networks from an amphiphilic rod-coil block copolymer: poly(n-hexyl isocyanate)-block-poly(2-vinylpyridine).

Morphologies of the poly(n-hexyl isocyanate)-block-poly(2-vinylpyridine) (PHIC-b-P2VP, fP2VP=0.3) amphiphilic rod-coil block copolymer were studied in rod-selective chloroform (CHCl3), both-block-soluble tetrahydrofuran (THF), and CHCl3/THF mixed solvent systems. Spherical, solid micelles with a P2VP core and PHIC shell were formed in CHCl3, whereas a microphase-separated liquid crystalline morphology was prominent in the presence of THF. In the CHCl3/THF mixed solvent system, a unique long-range intermicellar-chained network (v/v=7/3) and a more evolved cylindrical micellar network (v/v=3/7) were remarkably formed, respectively. PHIC-b-P2VP network nanostructures were used as a template for the in situ synthesis of Au nanoparticles (8 nm) selectively within the functional P2VP core domains.

Preparation of ag-embedded polystyrene nanospheres and nanocapsules by miniemulsion polymerization.

An isopropyl myristate (IPM) biocompatible oil and an IPM solution of dodecanethiol-capped Ag nanoparticles (NPs, 4.5 nm) were used as hydrophobes to suppress the Ostwald ripening of monomer/hydrophobe miniemulsified droplets in a surfactant-stabilized water phase. The formation of non-IPM-encapsulated nanospheres (48 nm) and IPM-encapsulated nanocapsules (90 nm) were precisely controlled by using a water-soluble and an oil-soluble initiator, respectively, in the presence of a pure IPM as a hydrophobe in miniemulsion polymerization. Well-defined PS nanospheres, on which surfaces were coated with Ag NPs (Ag/PS nanospheres, 65 nm), and nanocapsules encapsulating both NPs and IPM liquid phase (Ag-IPM/PS nanocapsules, 115 nm) were made by replacing the hydrophobe from pure IPM with Ag/IPM solution. These nanostructures were characterized by transmission and scanning electron microscopes.

Well-Organized CdS/C(60) in Block Copolymer Micellar Cores.

CdS nanoparticles of 4.5 nm diameter were synthesized in poly(2-vinylpyridine) micellar cores which were obtained by solvating a polystyrene-block-poly(2-vinylpyridine) block copolymer in polystyrene-selective toluene. Then, a C(60) -toluene solution was dispersed into the CdS micelle solution with stirring. This led to the well-defined organization of two different nanoparticles; specifically: a CdS NP decorated by several/dozens of C(60) molecules, because C(60) molecules were strongly coordinated with pyridine molecules in the micellar cores by charge-transfer complexation C 60δ--P2VP(δ+) . A harmoniously organized CdS/C(60) micellar structure was clearly verified by transmission electron microscopy. Fluorescent quenching of CdS nanoparticles, which was strongly affected by neighboring C(60) molecules, was observed.

Fabrication of an open Au/nanoporous film by water-in-oil emulsion-induced block copolymer micelles.

Water-in-oil (W/O) emulsion-induced micelles with narrow size distributions of approximately 140 nm were prepared by sonicating the polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer in the toluene/water (50:1 vol %). The ordered nanoporous block copolymer films with the hydrophilic P2VP interior and the PS matrix were distinctly fabricated by casting the resultant solution on substrates, followed by evaporating the organic solvent and water. The porous diameter was estimated to be about 70 nm. Here, we successfully prepared the open nanoporous nanocomposites, the P2VP domain decorated by Au (5+/-0.4 nm) nanoparticles based on the methodology mentioned. We anticipate that this novelty enhances the specific function of nanoporous films.

Location control of Au/CdS nanoparticles in block copolymer micelles.

Micellar core-embedded Au or CdS nanoparticles (NPs), in which the number of NPs was controlled by a solid type or a solution type of metallic precursors and by their amounts, were constructed using a block copolymer as a template. The location of NPs located at the micellar core was dramatically changed to the corona by the solvent-induced micellar core-corona inversion. By mixing the synthetic methods demonstrated, harmonious Au/CdS NPs with different particle sizes, numbers, and positions in the micellar core were also prepared.