A retrospective clinical audit of general practices in Australia to determine the motivation for switch to dolutegravir/abacavir/lamivudine and clinical outcomes.

The most common reasons for switching HIV-1 therapy in patients with virologic suppression are treatment regimen simplification and resolving tolerability issues. Single-pill regimens that include an integrase inhibitor are recommended options. A retrospective clinical audit was performed to determine the motivations for switching to dolutegravir (DTG)/abacavir (ABC)/lamivudine (3TC) at high HIV-caseload general practice clinics in Australia. The most common reasons for switching from a prior suppressive therapy to DTG/ABC/3TC were simplification of regimen, resolving toxicity/intolerance and patient preference (73%, 13% and 12%, respectively). Kaplan-Meier analysis showed that the probability of patients remaining on DTG/ABC/3TC therapy at 12 months was 95.1%. Switching to DTG/ABC/3TC from a range of other regimens was associated with a discontinuation rate of 3.2%, with 2.5% of patients discontinuing due to adverse events and no patients discontinuing due to virologic failure. Switching to DTG/ABC/3TC was a viable treatment strategy in this cohort of Australian patients.

Feasibility and acceptance of a pharmacist-run tele-oncology service for chemotherapy-induced nausea and vomiting in ambulatory cancer patients.

BACKGROUND: The use of telemedicine for cancer patients is limited, particularly in Asia. These patients need to be monitored because more are being treated as outpatients, so that any treatment-related side effects can be managed. We assessed the feasibility and acceptance of a pharmacist-run tele-oncology service to monitor chemotherapy-induced nausea and vomiting (CINV) in ambulatory cancer patients. PATIENTS AND METHODS: A single-center, prospective study was conducted at a local cancer center. Patients' CINV symptoms were monitored through short message service (SMS) for 5 days post-chemotherapy. Feasibility was measured by patients' adherence to the service, patient satisfaction, and number of pharmacist interventions. Acceptance was measured by the accrual rate. RESULTS: The accrual rate was 37.6% (68/181 patients). Sixty patients (median age, 49.5 years) completed the study. Overall adherence was 73.3%. The majority (90.0%) were comfortable with the duration of SMS monitoring, especially adherent patients (95.5% versus 75.0%, p=0.038). Over half (61.7%) found the SMS advice useful. Twenty-two intervention calls were made by pharmacists for uncontrolled CINV. CONCLUSIONS: A pharmacist-run tele-oncology service for real-time monitoring of CINV is feasible in ambulatory cancer patients. Incorporating the monitoring of other side effects will enhance its value and acceptance by patients for post-chemotherapy symptom management.

Growth of ultra long multiwall carbon nanotube arrays by aerosol-assisted chemical vapor deposition.

Using a home-made aerosol nebulizer, we developed a new aerosol-assisted chemical vapor deposition (AACVD) process that made it possible to synthesize vertically-aligned carbon nanotube (VACNT) arrays with heights over a few millimeters routinely. An essential part of this technique was in-situ formation of metal catalyst nanoparticles via pyrolysis of ferrocene-ethanol aerosol right before CNT synthesis. Through the optimization of aerosol supply and CVD process parameters, we were able to synthesize clean VACNT arrays as long as 4.38 mm with very low metal contents in 20 min. Furthermore, it is worthy noting that such an outstanding height is achieved very quickly without supporting materials and water-assistance. By taking advantage of almost complete inhibition of CNT growth on low melting-temperature metals, we were able to fabricate patterned VACNT arrays by combining AACVD process with a conventional photolithograpic patterning of gold lines. Characterizations of as-grown nanotubes such as morphology, purity, and metal contents are presented.

Vertical growth and resonator properties of hexagonally shaped zinc oxide nanonails.

We synthesized vertically aligned nail-shaped ZnO nanocrystal arrays on silicon substrates via a combination of a carbothermal reduction method and textured ZnO seeding layers that were precoated on silicon substrates by thermally decomposing zinc acetate, and studied their optical properties using cathodoluminescence (CL) and photoluminescence techniques. The ZnO nanonails show a sharp band-gap edge UV emission and a defect-related broad green emission. Monochromatic CL images of an individual ZnO nanonail show variations in spatial distributions of respective CL bands that had different origins. We attribute the spatial variation of CL images to an uneven distribution of luminescent defects and/or a structure-related light out-coupling from hexagonal ZnO nanostructures. The most distinct CL feature from the hexagonal head of an individual ZnO nanonail was the occurrence of a series of distinct resonant peaks within the visible wavelength range. It appeared that the head of a nanonail played the role of a hexagonal cavity so that polarization-dependent whispering gallery modes were stimulated by electron beam excitation.

Enhanced photoconduction of free-standing ZnO nanowire films by L-lysine treatment.

Flexible paper-like ZnO nanowire films are fabricated and the effect of L-lysine passivation of the nanowire surfaces on improving the UV photoresponse is studied. We prepare three types of nanowires with different defect contents, and find that the L-lysine treatment can suppress the oxygen-vacancy-related photoluminescence as well as enhance the UV photoconduction. The nanowires with fewer defects gain larger enhancement of UV photoconduction after L-lysine treatment. Reproducible UV photoresponse of the devices in humid air is obtained due to L-lysine surface passivation, ruling out the influence of water molecules in degrading the UV photocurrent.

Hybrid light-emitting diodes based on flexible sheets of mass-produced ZnO nanowires.

We report the production of free-standing thin sheets made up of mass-produced ZnO nanowires and the application of these nanowire sheets for the fabrication of ZnO/organic hybrid light-emitting diodes in the manner of assembly. Different p-type organic semiconductors are used to form heterojunctions with the ZnO nanowire film. Electroluminescence measurements of the devices show UV and visible emissions. Identical strong red emission is observed independent of the organic semiconductor materials used in this work. The visible emissions corresponding to the electron transition between defect levels within the energy bandgap of ZnO are discussed.

Bending and bundling of metal-free vertically aligned ZnO nanowires due to electrostatic interaction.

Bending and bundling was observed from vertically aligned arrays of ZnO nanowires with flat (0001) top surfaces, which were synthesized using a vapor-phase method without metal catalysts. Sufficient evidence was found to exclude electron-beam bombardment during scanning electron microscopy as a cause for bending and bundling. We attribute the bending and bundling to electrostatic interactions due to charged (0001) polar surfaces, and also discussed the threshold surface charge densities for the bending and bundling based on a simple cantilever-bending model. Some growth features were indicative of the operation of electrostatic interactions during the growth.

Low temperature wet chemical synthesis of good optical quality vertically aligned crystalline ZnO nanorods.

The growth of ZnO nanorods on Au-coated ITO substrates using a low temperature wet chemical process is presented. Electron microscopy and x-ray diffraction observations reveal that the crystalline ZnO nanorods are preferentially oriented along the c axis. Room temperature photoluminescence (PL) measurements reveal a strong band edge emission at 382 nm, a signature of good crystallinity, with a weak and broad orange-red emission, which is typically attributed to the oxygen interstitials, in the range between 520 and 720 nm. Other than the second order feature of the band edge emission at 760 nm, no red or near-infrared bands are observed. The effect of precursor concentration on the morphological, structural and PL properties are studied, and the results are discussed.