Molecular Locking with All-Organic Surface Modifiers Enables Stable and Efficient Slot-Die-Coated Methyl-Ammonium-Free Perovskite Solar Modules.

The power conversion efficiency (PCE) of the state-of-the-art large-area slot-die-coated perovskite solar cells (PSCs) is now over 19%, but issues with their stability persist owing to significant intrinsic point defects and a mass of surface imperfections introduced during the fabrication process. Herein, the utilization of a hydrophobic all-organic salt is reported to modify the top surface of large-area slot-die-coated methylammonium (MA)-free halide perovskite layers. Bearing two molecules, each of which is endowed with anchoring groups capable of exhibiting secondary interactions with the perovskite surfaces, the organic salt acts as a molecular lock by effectively binding to both anion and cation vacancies, substantially enhancing the materials' intrinsic stability against different stimuli. It not only reduces the ingression of external species such as oxygen and moisture, but also suppresses the egress of volatile organic components during the thermal stability testing. The treated PSCs demonstrate efficiency of 19.28% (active area of 58.5 cm2 ) and 17.62% (aperture area of 64 cm2 ) for the corresponding mini-module. More importantly, unencapsulated slot-die-coated mini-modules incorporating the all-organic surface modifier show ≈80% efficiency retention after 7500 h (313 days) of storage under 30% relative humidity (RH). They also remarkably retain more than 90% of the initial efficiency for over 850 h while being measured continuously.

Inorganic frameworks of low-dimensional perovskites dictate the performance and stability of mixed-dimensional perovskite solar cells.

Mixed-dimensional perovskites containing mixtures of organic cations hold great promise to deliver highly stable and efficient solar cells. However, although a plethora of relatively bulky organic cations have been reported for such purposes, a fundamental understanding of the materials' structure, composition, and phase, along with their correlated effects on the corresponding optoelectronic properties and degradation mechanism remains elusive. Herein, we systematically engineer the structures of bulky organic cations to template low-dimensional perovskites with contrasting inorganic framework dimensionality, connectivity, and coordination deformation. By combining X-ray single-crystal structural analysis with depth-profiling XPS, solid-state NMR, and femtosecond transient absorption, it is revealed that not all low-dimensional species work equally well as dopants. Instead, it was found that inorganic architectures with lesser structural distortion tend to yield less disordered energetic and defect landscapes in the resulting mixed-dimensional perovskites, augmented in materials with a longer photoluminescence (PL) lifetime, higher PL quantum yield (up to 11%), improved solar cell performance and enhanced thermal stability (T80 up to 1000 h, unencapsulated). Our study highlights the importance of designing templating organic cations that yield low-dimensional materials with much less structural distortion profiles to be used as additives in stable and efficient perovskite solar cells.

Enhanced Thermal Stability of Planar Perovskite Solar Cells Through Triphenylphosphine Interface Passivation.

While extensive research has driven the rapid efficiency trajectory noted to date for organic-inorganic perovskite solar cells (PSCs), their thermal stability remains one of the key issues hindering their commercialization. Herein, a significant reduction in surface defects (a precursor to perovskite instability) could be attained by introducing triphenylphosphine (TPP), an effective Lewis base passivator, to the vulnerable perovskite/spiro-OMeTAD interface. Not only did TPP passivation enable a high power conversion efficiency (PCE) of 20.22 % to be achieved, these devices also exhibited superior ambient and thermal stability. Unlike the pristine device, which exhibited a sharp descend to 16 % of its initial PCE on storing in relative humidity of 10 %, at 85 °C for more than 720 h, the TPP-passivated devices retained 71 % of its initial PCE. Hence, this study presents a facile yet excellent approach to attain high-performing yet thermally stable PSCs.

Halide Perovskite Solar Cells for Building Integrated Photovoltaics: Transforming Building Façades into Power Generators.

The rapid emergence of organic-inorganic lead halide perovskites for low-cost and high-efficiency photovoltaics promises to impact new photovoltaic concepts. Their high power conversion efficiencies, ability to coat perovskite layers on glass via various scalable deposition techniques, excellent optoelectronic properties, and synthetic versatility for modulating transparency and color allow perovskite solar cells (PSCs) to be an ideal solution for building-integrated photovoltaics (BIPVs), which transforms windows or façades into electric power generators. In this review, the unique features and properties of PSCs for BIPV application are accessed. Device engineering and optical management strategies of active layers, interlayers, and electrodes for semitransparent, bifacial, and colorful PSCs are also discussed. The performance of PSCs under conditions that are relevant for BIPV such as different operational temperature, light intensity, and light incident angle are also reviewed. Recent outdoor stability testing of PSCs in different countries and other demonstration of scalability and deployment of PSCs are also spotlighted. Finally, the current challenges and future opportunities for realizing perovskite-based BIPV are discussed.

Formation of Corrugated n = 1 2D Tin Iodide Perovskites and Their Use as Lead-Free Solar Absorbers.

Major strides have been made in the development of materials and devices based around low-dimensional hybrid group 14 metal halide perovskites. Thus far, this work has mostly focused on compounds containing highly toxic Pb, with the analogous less toxic Sn materials being comparatively poorly evolved. In response, the study herein aims to (i) provide insight into the impact of templating cations upon the structure of n = 1 2D tin iodide perovskites (where n refers to the number of contiguous two-dimensional (2D) inorganic layers, i.e., not separated by organic cations) and (ii) examine their potential as light absorbers for photovoltaic (PV) cells. It was discovered through systematic tuning of organic dications that imidazolium rings are able to induce the formation of (110)-oriented materials, including examples of "3 × 3" corrugated Sn-I perovskites. This structural outcome is a consequence of a combination of supramolecular interactions of the two endocyclic N atoms of the imidazolium rings with the Sn-I framework, and the comparatively high tendency of Sn2+ ions to stereochemically express their 5s2 lone pairs . More importantly, the resulting materials feature very short separations between their 2D inorganic layers with iodide-iodide (I···I) contacts as small as 4.174 Å, which is among the shortest ever recorded for 2D tin iodide perovskites. These proximate inorganic distances, combined with the polarizable nature of the imidazolium moiety, eases the separation of photogenerated charge within the materials. This is evident from the measurement of excitonic activation energies as low as 83(10) meV for ImEA[SnI4]. When combined with superior light absorption capabilities relative to their lead congeners, this allowed the fabrication of lead-free solar cells with incident photon-to-current and power conversion efficiencies of up to 70% and 2.26%, respectively, which are among the highest values reported for pure n = 1 2D group 14 metal halide perovskites. In fact, these values are superior to the corresponding lead iodide material, which demonstrates that 2D Sn-based materials have significant potential as less toxic alternatives to their Pb counterparts.

Novel amphiphilic corannulene additive for moisture-resistant perovskite solar cells.

The addition of amphiphilic triethylene glycol based corannulene molecules provides multiple Lewis basic sites that assist in perovskite grain growth, and improve the charge carrier collection and moisture resistance of perovskite solar cells. This study paves the way for utilization of more molecules from corannulene families in perovskite research.

Realizing Reduced Imperfections via Quantum Dots Interdiffusion in High Efficiency Perovskite Solar Cells.

Realization of reduced ionic (cationic and anionic) defects at the surface and grain boundaries (GBs) of perovskite films is vital to boost the power conversion efficiency of organic-inorganic halide perovskite (OIHP) solar cells. Although numerous strategies have been developed, effective passivation still remains a great challenge due to the complexity and diversity of these defects. Herein, a solid-state interdiffusion process using multi-cation hybrid halide perovskite quantum dots (QDs) is introduced as a strategy to heal the ionic defects at the surface and GBs. It is found that the solid-state interdiffusion process leads to a reduction in OIHP shallow defects. In addition, Cs+ distribution in QDs greatly influences the effectiveness of ionic defect passivation with significant enhancement to all photovoltaic performance characteristics observed on treating the solar cells with Cs0.05 (MA0.17 FA0.83 )0.95 PbBr3 (abbreviated as QDs-Cs5). This enables power conversion efficiency (PCE) exceeding 21% to be achieved with more than 90% of its initial PCE retained on exposure to continuous illumination of more than 550 h.

Metal Coordination Sphere Deformation Induced Highly Stokes-Shifted, Ultra Broadband Emission in 2D Hybrid Lead-Bromide Perovskites and Investigation of Its Origin.

Published studies of layered (2D) (100)-oriented hybrid lead-bromide perovskites evidence a correlation between increased inter-octahedral (Pb-Br-Pb) distortions and the appearance of broadband white light emission. However, the impact of distortions within their constituent [PbBr6 ]4- octahedra has yet to be assessed. Herein, we report two new (100)-oriented 2D Pb-Br perovskites, whose structures display unusually high intra-octahedral distortions, whilst retaining minimal inter-octahedral distortions. Using a combination of temperature-dependent, power-dependent and time-resolved photoluminescence spectroscopic measurements, we show that increased intra-octahedral distortion induces exciton localization processes and leads to formation of multiple photoinduced emissive colour centres. Ultimately, this leads to highly Stokes-shifted, ultrabroad white light emission at room temperature.

Molecular Engineering of Pure 2D Lead-Iodide Perovskite Solar Absorbers Displaying Reduced Band Gaps and Dielectric Confinement.

Pure 2D lead-iodide perovskites typically demonstrate poor charge transport and compromised visible light absorption, relative to their 3D congeners. This hinders their potential use as solar absorbers. Herein, the systematic tuning of pyridinium-based templating cations is reported to introduce intermolecular interactions that provide access to a series of new 2D lead-iodide perovskites with reduced inter-octahedral distortions (largest Pb-(µ-I)-Pb bond angles of 170-179°) and very short inorganic interlayer separations (shortest I⋅⋅⋅I contacts ≤4.278-4.447 Å). These features manifest in reduced band gaps (2.35-2.46 eV) and relaxed dielectric confinement (excitonic binding energies of 130-200 meV). As a consequence, they demonstrate (more than ten-fold) improved photo- and electrical conductivities relative to conventional 2D lead-iodide perovskites, such as that templated by 2-(1-naphthyl)ethylammonium. Through computational studies, the origin of this behavior was shown to derive from a combination of short iodoplumbate layer separations and the aromaticity of the organic dications.

Bifacial, Color-Tunable Semitransparent Perovskite Solar Cells for Building-Integrated Photovoltaics.

Recently, semitransparent perovskite solar cells (ST-PSCs) have received overwhelming attention due to their potential applications in building-integrated photovoltaics (BIPV) and in tandem solar cells. The best ST-PSCs, despite the high efficiency achieved, still show limited bifacial properties and lack esthetic properties. Here, we have demonstrated efficient bifacial colorful ST-PSCs using copper thiocyanate (CuSCN), as a hole-transporting material, in an n-i-p architecture. The n-i-p ST-PSCs exhibit the highest reported bifacial factor of 93.7% and achieve a bifacial equivalent efficiency of 22.1% when illuminated under 1 sun standard conditions on the front side and with a reflected albedo of ∼54.4% from the back side. We have also demonstrated that the colorful appearance of CuSCN-based ST-PSCs can be easily tuned across the entire visible spectrum by tuning either the indium tin oxide (ITO) or the CuSCN thickness without affecting their final efficiency. The wide colorful tunability and excellent bifacial photovoltaic behavior of CuSCN-based ST-PSCs make them a promising candidate for BIPV applications.

Cesium Oleate Passivation for Stable Perovskite Photovoltaics.

Despite their emergence as promising materials for low-cost and efficient energy power generation technology, the instability of hybrid organic-inorganic lead-halide perovskites toward moisture and heat stress remains a serious obstacle that needs to be tackled for commercialization. Here, we show improved moisture and thermal stability through the use of cesium oleate to modify the perovskite/hole transporting material interface. Passivation using cesium oleate does not induce the formation of any low-dimensional perovskites, suggesting that the organic species only passivate the perovskite's surface and grain boundaries. As a result, enhanced hydrophobic character of the perovskite film is realized upon passivation, evidenced by a large water contact angle of 107.4° and improved stability at ambient conditions (a relative humidity of ∼70%, room temperature). Concomitantly, the proposed passivation strategy leads to an increased amount of cesium concentration within the films, resulting in beneficial enhanced thermal stability of the film at 85 °C. By maintaining the three-dimensional (3D) structure of the solar absorber while concurrently passivating the interfacial defects and vacancies, improved open-circuit voltage (Voc) and unsacrificed short-circuit current density (Jsc) were obtained from the treated devices, leading to power conversion efficiencies of more than 18%. When stored in a humid environment (a relative humidity of ∼55%), devices with cesium oleate passivation maintain 88% of their initial power conversion efficiency after 720 h, degrading two times slower than those of the control. This work offers a strategy of coating 3D perovskites with a unique combination of inorganic cations and long-chain organics to provide hydrophobicity and moisture stability to the solar absorber layer while maintaining good device performances.

Perturbation-Induced Seeding and Crystallization of Hybrid Perovskites over Surface-Modified Substrates for Optoelectronic Devices.

Growing a monocrystalline layer of lead halide perovskites directly over substrates is necessary to completely harness their stellar properties in optoelectronic devices, as the single crystals of these materials are extremely brittle. We study the crystallization mechanism of perovskites by antisolvent vapor diffusion to its precursor solution and find that heterogeneous nucleation prevails in the process, with the crystallization dish walls providing the energy to overcome the nucleation barrier. By perturbing the system using sonication, we are able to introduce homogeneously nucleated seed crystals in the precursor solution. These seeds lead to the growth of closely packed crystals over surface-modified substrates kept in the precursor solution. This crystallization process is substrate independent and scalable and can be utilized to fabricate planar optoelectronic devices. We demonstrate a methylammonium lead iodide planar crystal photoconductor with a colossal detectivity of 1.48 × 1013 Jones.

Low threshold and efficient multiple exciton generation in halide perovskite nanocrystals.

Multiple exciton generation (MEG) or carrier multiplication, a process that spawns two or more electron-hole pairs from an absorbed high-energy photon (larger than two times bandgap energy Eg), is a promising way to augment the photocurrent and overcome the Shockley-Queisser limit. Conventional semiconductor nanocrystals, the forerunners, face severe challenges from fast hot-carrier cooling. Perovskite nanocrystals possess an intrinsic phonon bottleneck that prolongs slow hot-carrier cooling, transcending these limitations. Herein, we demonstrate enhanced MEG with 2.25Eg threshold and 75% slope efficiency in intermediate-confined colloidal formamidinium lead iodide nanocrystals, surpassing those in strongly confined lead sulfide or lead selenide incumbents. Efficient MEG occurs via inverse Auger process within 90 fs, afforded by the slow cooling of energetic hot carriers. These nanocrystals circumvent the conundrum over enhanced Coulombic coupling and reduced density of states in strongly confined nanocrystals. These insights may lead to the realization of next generation of solar cells and efficient optoelectronic devices.

High Stability Bilayered Perovskites through Crystallization Driven Self-Assembly.

In this manuscript we reveal the formation of bilayered hybrid perovskites of a new lower dimensional perovskite family, (CHMA)2(MA)n-1PbnI3 with n = 1-5, with high ambient stability via its crystallization driven self-assembly process. The spun-coated perovskite solution tends to crystallize and undergo phase separation during annealing, resulting in the formation of 2D/3D bilayered hybrid perovskites. Remarkably, this 2D/3D hybrid perovskites possess striking moisture resistance and displays high ambient stability up to 65 days. The bilayered approach in combining 3D and 2D perovskites could lead to a new era of perovskite research for high-efficiency photovoltaics with outstanding stability, with the 3D perovskite providing excellent electronic properties while the 2D perovskite endows it moisture stability.

Facile Method to Reduce Surface Defects and Trap Densities in Perovskite Photovoltaics.

Owing to improvements in film morphology, crystallization process optimization, and compositional design, the power conversion efficiency of perovskite solar cells has increased from 3.8 to 22.1% in a period of 5 years. Nearly defect-free crystalline films and slow recombination rates enable polycrystalline perovskite to boast efficiencies comparable to those of multicrystalline silicon solar cells. However, volatile low melting point components and antisolvent treatments essential for the processing of dense and smooth films often lead to surface defects that hamper charge extraction. In this study, we investigate methylammonium bromide (MABr) surface treatments on perovskite films to compensate for the loss of volatile cation during the annealing process for surface defect passivation, grain growth, and a bromide-rich top layer. This facile method did not change the phase or bandgap of perovskite films yet resulted in a significant increase in the open circuit voltages of devices. The devices with 10 mM MABr treatment show 2% improvement in absolute power conversion efficiency over the control sample.

Efficient photoluminescent thin films consisting of anchored hybrid perovskite nanoparticles.

Methylammonium lead bromide nanoparticles are synthetized with a new ligand (11-aminoundecanoic acid hydrobromide) by a non-template method. Upon dispersion in toluene they show a remarkable photoluminescence quantum yield of 80%. In addition, the bifunctional ligand allows anchoring of the nanoparticles on a variety of conducting and semiconducting surfaces, showing bright photoluminescence with a quantum yield exceeding 50%. This opens a path for the simple and inexpensive preparation of multilayer light-emitting devices.

Multidimensional Perovskites: A Mixed Cation Approach Towards Ambient Stable and Tunable Perovskite Photovoltaics.

Although halide perovskites are able to deliver high power conversion efficiencies, their ambient stability still remains an obstacle for commercialization. Thus, promoting the ambient stability of perovskites has become a key research focus. In this review, we highlight the sources of instability in conventional 3 D perovskites, including water intercalation, ion migration, and thermal decomposition. Recently, the multidimensional perovskites approach has become one of the most promising strategies to enhance the stability of perovskites. As compared to pure 2 D perovskites, multidimensional perovskites typically possess more ideal band gaps, better charge transport, and lower exciton binding energy, which are essential for photovoltaic applications. The larger organic cations in multidimensional perovskites could also be more chemically stable at higher temperatures than the commonly used methylammonium cation. By combining 3 D and 2 D perovskites to form multidimensional perovskites, halide perovskite photovoltaics can attain both high efficiency and increased stability.

Nanostructuring Mixed-Dimensional Perovskites: A Route Toward Tunable, Efficient Photovoltaics.

2D perovskites is one of the proposed strategies to enhance the moisture resistance, since the larger organic cations can act as a natural barrier. Nevertheless, 2D perovskites hinder the charge transport in certain directions, reducing the solar cell power conversion efficiency. A nanostructured mixed-dimensionality approach is presented to overcome the charge transport limitation, obtaining power conversion efficiencies over 9%.

Perovskite Solar Cells: Beyond Methylammonium Lead Iodide.

Organic-inorganic lead halide based perovskites solar cells are by far the highest efficiency solution-processed solar cells, threatening to challenge thin film and polycrystalline silicon ones. Despite the intense research in this area, concerns surrounding the long-term stability as well as the toxicity of lead in the archetypal perovskite, CH3NH3PbI3, have the potential to derail commercialization. Although the search for Pb-free perovskites have naturally shifted to other transition metal cations and formulations that replace the organic moiety, efficiencies with these substitutions are still substantially lower than those of the Pb-perovskite. The perovskite family offers rich multitudes of crystal structures and substituents with the potential to uncover new and exciting photophysical phenomena that hold the promise of higher solar cell efficiencies. In addressing materials beyond CH3NH3PbI3, this Perspective will discuss a broad palette of elemental substitutions, solid solutions, and multidimensional families that will provide the next fillip toward market viability of the perovskite solar cells.

Comparative studies on rigid π linker-based organic dyes: structure-property relationships and photovoltaic performance.

A series of six structurally correlated donor-π bridge-acceptor organic dyes were designed, synthesized, and applied as sensitizers in dye-sensitized solar cells. Using the most widely studied donor (triarylamine) and cyclopenta[1,2-b:5,4-b']dithiophene or cyclopenta[1,2-b:5,4-b']dithiophene[2',1':4,5]thieno[2,3-d]thiophene as π spacers, their structure-property relationships were investigated in depth by photophysical techniques and theoretical calculations. It was found that the photovoltaic performance of these dyes largely depends on their electronic structures, which requires synergistic interaction between donors and acceptors. Increasing the electron richness of the donor or the elongation of π-conjugated bridges does not necessarily lead to higher performance. Rather, it is essential to rationally design the dyes by balancing their light-harvesting capability with achieving suitable energy levels to guarantee unimpeded charge separation and transport.