A passively mode-locked femtosecond soliton fiber laser at 1.5 microm with a CNT-doped polycarbonate saturable absorber.

We report a new 1.5 mum femtosecond fiber soliton laser incorporating a polymer saturable absorber that consists of polycarbonate (PC) with carbon nanotubes (CNTs). We installed the polymer in a fiber laser with a cavity length of 5.1 m, in which an erbium-doped fiber was used as the gain medium. Stable passive mode-locking was achieved for a pump power of 303 mW at 39 MHz, and a pulse width of 115 fs with an average output power of 3.4 mW was obtained.

Serially grafted polymer optical waveguides fabricated by light-induced self-written waveguide technique.

Serially grafted polymer optical waveguides were fabricated by the light-induced self-written (LISW) waveguide technique for the first time to our knowledge. To realize functional waveguide cores by the LISW technique, transparent materials at the writing wavelength were selected. By inserting thin transparent partitions, a serial-graft structure consisting of passive and active waveguides without any misalignment was realized automatically. This technique is advantageous for its extremely easy process over conventional fabrication techniques.

Polymer saturable absorber materials in the 1.5 microm band using poly-methyl-methacrylate and polystyrene with single-wall carbon nanotubes and their application to a femtosecond laser.

We report saturable absorber materials in the 1.5 microm band that consist of poly-methyl-methacrylate (PMMA) and polystyrene (PS) polymers with single-wall carbon nanotubes (SWNTs). A very uniform dispersion of SWNT in PMMA and PS polymers has been realized by using chlorobenzene or tetrahydrofuran as a dispersion solvent. These materials, which are as thick as 1 mm, are easily optically polished on both surfaces. This was difficult to achieve with previous thin-film materials. By incorporating PMMA/SWNT as a saturable absorber, a 171 fs pulse is successfully generated in a passively mode-locked fiber laser.

Simple process for fabricating a monolithic polymer optical waveguide.

A simple and economical fabrication process for a monolithic polymer optical waveguide in which different materials are serially grafted is proposed and demonstrated. A cladding layer with a waveguide core groove is fabricated by microtransfer molding. An epoxy resin solution is spin coated onto the cladding before selective photoexposure to form a transparent waveguide core. An optical functional polymer solution is then spin coated to form a serially grafted waveguide structure. Thus two types of polymer fill the groove to realize a monolithically integrated waveguide. Controlling the groove shape results in a flat surface. A low connection loss between the two polymers, less than 0.01 dB/point, is obtained.