Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Opt Lett ; 49(14): 3998-4001, 2024 Jul 15.
Artigo em Inglês | MEDLINE | ID: mdl-39008761

RESUMO

We propose a system for imaging 1510 nm near-infrared (NIR) wavelength via upconversion (UC) luminescence in an Er3+-doped CaF2 crystal. Er3+ ions are excited from the ground to the excited state levels by an 800-nm pre-excitation wavelength, followed by the promotion of these ions to a higher energy level by the NIR excitation wavelength. Relaxation of these excited ions gives rise to 540 nm UC luminescence in the visible region, enabling the detection of the 1510 nm NIR wavelength. Using this UC scheme, 1510 nm was successfully imaged. Our system enables imaging of NIR wavelengths using low-cost optics and readily available Si-based detectors that are sensitive only to visible wavelengths, opening new possibilities for detection and imaging of NIR wavelengths.

2.
Opt Express ; 30(20): 36813-36825, 2022 Sep 26.
Artigo em Inglês | MEDLINE | ID: mdl-36258603

RESUMO

We developed a mid-infrared spectroscopy system with high spectral resolution and a high signal-to-noise ratio using an extremely high-order germanium immersion grating. The spectroscopic system covers wavelengths from 3 to 5 µm and has a spectral resolution of 1 GHz with a single-shot bandwidth of 2 THz. We proposed a method of improving the signal-to-noise ratio and achieved a ratio of over 3000 with a data acquisition rate of 125 Hz in the presence of fluctuations in the light source and environment. A signal-to-noise ratio of 10,000 was achieved with 0.1-s integration for 100-µW mid-infrared light.

3.
Sci Rep ; 3: 2561, 2013.
Artigo em Inglês | MEDLINE | ID: mdl-24008696

RESUMO

Pellet injection and repetitive laser illumination are key technologies for realizing inertial fusion energy. Numerous studies have been conducted on target suppliers, injectors, and tracking systems for flying pellet engagement. Here we for the first time demonstrate the pellet injection, counter laser beams' engagement and neutron generation. Deuterated polystyrene (CD) bead pellets, after free-falling for a distance of 18 cm at 1 Hz, are successfully engaged by two counter laser beams from a diode-pumped, ultra-intense laser HAMA. The laser energy, pulse duration, wavelength, and the intensity are 0.63 J per beam, 104 fs, and 811 nm, 4.7 × 10(18) W/cm(2), respectively. The irradiated pellets produce D(d,n)(3)He-reacted neutrons with a maximum yield of 9.5 × 10(4)/4π sr/shot. Moreover, the laser is found out to bore a straight channel with 10 µm-diameter through the 1-mm-diameter beads. The results indicate potentially useful technologies and findings for the next step in realizing inertial fusion energy.


Assuntos
Lasers , Nêutrons , Fusão Nuclear , Poliestirenos/efeitos da radiação
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...