[The Japanese Law Regulating Underwater and Caisson Work: Current Issues and Future Developments].

The Japan "Ordinance on Safety and Health of Work under High Pressure", which is the law regulating health conditions for workers under high pressure environments, was amended in 2014. The revised regulations have highlighted other difficulties and new problems, but they have not yet written an appropriate amendment based on the aspect of occupational and environmental health. Health management for occupational divers and caisson workers in accordance with the new regulations has not determined the best approach to reducing related disorders and will cause other legal problems. This paper presents some issues in the new regulations for hyperbaric workers, which directly or indirectly involve occupational health physicians. Health checkups and work limitations should be done in consideration of the occupational characteristics of the undersea and hyperbaric environment. Regular examinations using specific studies are useful to diagnose the early stages of chronic conditions for workers, and are also useful for determining the hiring suitability for hyperbaric workers. Work limitations should be decided by the conditions that induce serious accidents or disorders that result from exposure to hyperbaric environments, and depend on the obstacles for work due to sequelae of decompression sickness. The new regulations need to be properly revised, based on scientific evidence, to include health management for workers in undersea and hyperbaric environments.

Atomically Flat Pt Skin and Striking Enrichment of Co in Underlying Alloy at Pt3Co(111) Single Crystal with Unprecedented Activity for the Oxygen Reduction Reaction.

By the use of in situ scanning tunneling microscopy and surface X-ray scattering techniques, we have clarified the surface structure and the layer-by-layer compositions of a Pt skin/Pt3Co(111) single-crystal electrode, which exhibited extremely high activity for the oxygen reduction reaction. The topmost layer was found to be an atomically flat Pt skin with (1 × 1) structure. Cobalt was enriched in the second layer up to 98 atom %, whereas the Co content in the third and fourth layers was slightly smaller than that in the bulk. By X-ray photoelectron spectroscopy, the Co in the subsurface layers was found to be positively charged, which is consistent with an electronic modification of the Pt skin. The extremely high activity at the Pt skin/Pt3Co(111) single crystal is correlated with this specific surface structure.

Anion-Dependent Potential Precycling Effects on Lithium Deposition/Dissolution Reaction Studied by an Electrochemical Quartz Crystal Microbalance.

The electrochemical quartz crystal microbalance technique was employed to study the initial stage of the electrodeposition and dissolution of lithium utilizing three kinds of electrolyte solutions such as LiPF6, LiTFSI, or LiFSI in tetraglyme. The native-SEI (solid-electrolyte interphase) formed by a potential prescan before lithium deposition/dissolution in all three solutions. Simultaneous additional SEI (add-SEI) deposition and its dissolution with lithium deposition and dissolution, respectively, were observed in LiPF6 and LiTFSI. Conversely, the add-SEI dissolution with lithium deposition and its deposition with lithium dissolution were observed in LiFSI. Additional potential precycling resulted in the accumulation of a "pre-SEI" layer over the native-SEI layer in all of the solutions. With the pre-SEI, only lithium deposition/dissolution were significantly observed in LiTFSI and LiFSI. On the basis of the potential dependences of the mass and resistance changes, the anion-dependent effects of such a pre-SEI layer presence/absence on the lithium deposition/dissolution processes were discussed.

Molecular catalysts confined on and within molecular layers formed on a si(111) surface with direct si-C bonds.

Two examples of confined molecular catalysts are presented. PtCl(4) (2-) complexes are attached to a thiol-terminated monolayer by ligand exchange of Cl(-) with a thiolate group and incorporated in a multilayer of viologen moieties by ion exchange. All Cl(-) ligands are replaced by OH(-) or H(2) O before HER takes place. Ex situ and in situ XAFS measurements confirm that the Pt complexes accelerate HER without being converted into Pt particles.

Numerical simulation of oxygen transport in cerebral tissue.

The physiological mechanism of coupling between neuronal activity, metabolism and cerebral blood flow (CBF) is not clarified enough. In this study, the authors have examined activity-dependent changes in oxygen partial pressure (pO2) and CBF response in an arteriole by 2-dimensional numerical simulation with a mathematical model of O2 transport from the arteriole to its surrounding tissue including an adjusting function of CBF. In the steady state of O2 consumption, an area in the tissue where O2 is supplied from the arteriole becomes smaller as O2 consumption rate of the tissue increases, which is accompanied by increase of CBF. Therefore decrease of the O2-supplied area gradually becomes stagnant. Unsteady responses of the local pO2 and CBF were also examined. The response of pO2 in the upstream area of the arteriole is monophasic increment corresponding to CBF response, whereas the response in the middle area is biphasic response showing an initial decrease followed by a positive peak. In the downstream area, advective flow holds decrement of the pO2. Delay in CBF response to neuronal activity has also been found.

Evaluation of NIRS data based on theoretical analysis of oxygen transport to cerebral tissue.

NIRS has been widely utilized for monitoring oxygen concentration of cerebral blood flow (CBF). However, meanings of signals measured by NIRS still have many unclear points. One of the factors is that the physiological mechanism of coupling between neuronal activity, metabolism and CBF is not clarified enough. In this study, we evaluate NIRS data based upon numerical simulation of oxygen transport to cerebral tissue. With a 2-dimensional mathematical model of oxygen transport from an arteriole to its surrounding tissue, we simulate the activity-dependent oxygenation changes. On the basis of calculated oxygen tension distribution, we derive quantities of two kinds of hemoglobin in the arteriole by using the oxygen dissociation curve, and theoretically decompose each hemoglobin change into its factors. This decomposition has revealed that NIRS data can reflect two types of physiological phenomena: a qualitative change caused by oxygen dissociation and a quantitative change caused by an increase of CBF. These results indicate that cellular oxygen consumption can be reflected more in the time courses of deoxygenated hemoglobin than those of oxygenated hemoglobin. It will be desirable to focus not only on oxygenated hemoglobin but also on deoxygenated hemoglobin when conducting evaluation of a brain function.

Functionalization of silicon surfaces with catalytically active Pd complexes and application to the aerobic oxidation of benzylic alcohols.

A single-crystal silicon surface was modified with a bisoxazoline-Pd molecular layer and utilized as a highly efficient (catalyst turnover number up to 780,000, 110 degrees C, 72 h) and recyclable catalyst in the aerobic oxidation of benzylic alcohols.

Electrochemical assembly and potential-dependent plasmon absorption of au nanoclusters covered with a 4-aminothiophenol self-assembled monolayer.

Gold nanoclusters covered with 4-aminothiophenol (4-ATP) self-assembled monolayers (SAMs) were electrochemically assembled on an Au or ITO electrode. The assembly mechanism is discussed on the basis of results of electrochemical, FT-IR, and XPS measurements. The intensity of plasmon absorption of the gold nanocluster assembly was shown to be dependent on applied potential as a result of electrochemical doping/undoping of a counteranion in the polyaniline film.

Decomposition processes of an organic monolayer formed on Si(111) via a silicon-carbon bond induced by exposure to UV irradiation or ozone.

The decomposition processes of an organic monolayer, which was formed on Si(111) via a Si-C covalent bond, induced by exposure to UV light irradiation or ozone, were investigated using attenuated total reflectance Fourier transform infrared spectroscopy. Exposure to both ozone and UV light resulted in a reduction of the intensities of the IR peaks corresponding to CH stretching vibration and bending scissors and the appearance of peaks corresponding to CO stretching and COH in-plane bending. The latter peaks initially increased, reached a maximum, and then decreased, indicating that the monolayer was decomposed through the formation of intermediates such as aldehyde and carboxylic acid. The monolayer was also decomposed by exposure only to UV light or ozone but more slowly as the time dependencies of the CH peaks showed. While the peaks corresponding to the CO stretching and the COH in-plane bending behaved similarly under the condition of exposure to ozone, they were not observed during decomposition induced by UV irradiation. These results show that, while the monolayer was decomposed through the formation of oxidized intermediates such as aldehyde and carboxylic acid under the condition of exposure to ozone, the decomposition of the monolayer under the condition of UV irradiation proceeded via cleavage of Si-C bonds by photogenerated electrons or holes without such oxidized intermediates. An increase of gauche defects as the decomposition proceeded was demonstrated by sum frequency generation spectroscopy.

Electron and ion transfer through multilayers of gold nanoclusters covered by self-assembled monolayers of alkylthiols with various functional groups.

The electrochemical characteristics of various kinds of multilayers of gold nanoclusters (GNCs) were investigated. Two types of gold nanoclusters, one covered by self-assembled monolayers (SAMs) of mercaptoundecanoic acid (MUA), hexanethiol (C6SH), and ferrocenylhexanethiol (FcC6SH), MHF-GNC, and the other with MUA and C6SH, MH-GNC, were used. The multilayers were constructed on a Au(111) surface based on a carboxylate/metal cation (Cu++)/carboxylate or carboxylate/cationic polymer (poly(allylamine hydrochloride):PAH)/carboxylate electrostatic interaction. While the multilayers constructed by the former method were stable only in nonaqueous solutions, those constructed by the latter method were stable even in aqueous solutions. Electrochemical measurements of the multilayers of MHF-GNCs showed a pair of waves corresponding to the redox of the ferrocene group around 350-480 mV and the charge of these peaks, i.e., the amount of adsorbed GNC, increased linearly with the construction cycle up to 6 cycles in the former and to 18 cycles in the latter. A rather reversible redox response of the ferrocene moiety was observed even at the gold electrodes with five GNC layers of two different sequences in which MHF-GNC exists as the layer closest to the gold electrode, ie., the first layer, or as the outermost layer with MH-GNC in the other layers. These results show the facile transfer of electrons and ions through the multilayers of the SAM-covered GNCs and electron transfer between the ferrocene moiety and the Au(111) electrode takes place through the GNC cores by hopping.