Emission behaviors from ZnO microwire pumped CsPbBr3 perovskite microwire.

Perovskite semiconductor materials have attracted significant attention in the fields of photovoltaics and luminescence due to their excellent photoelectric properties, such as high carrier mobility, high absorption coefficient, and high fluorescence quantum yield. In particular, low-dimensional metal-halide perovskite microcrystalline materials have been reported to exhibit low-dimensional lasing phenomena and laser devices due to their high gain and widely tunable bandgap. In this Letter, one-dimensional (1-D) ZnO microwires with their ultraviolet lasing emissions are utilized as an excitation source to pump CsPbBr3 microwire on hybrid ZnO-CsPbBr3 microscale structures. At higher excitation, the amplified spontaneous emission (ASE) behaviors from CsPbBr3 microwire are realized with ultralow threshold by indirect pumping from the ZnO lasing emission for the first time, to the best of our knowledge. In comparison, the ASE behaviors from the CsPbBr3 microwire directly pumped by Nd:YAG Q-switched laser and continuous wave laser are also performed at room temperature. There are also no multimode lasing behaviors observed. The paper provides a new method to achieve a low threshold on-chip microlaser by a high-quality perovskite micro-nano structure.

Chemical Vapor Deposition Synthesis of Intrinsic High-Temperature Ferroelectric 2D CuCrSe2.

Ultrathin 2D ferroelectrics with high Curie temperature are critical for multifunctional ferroelectric devices. However, the ferroelectric spontaneous polarization is consistently broken by the strong thermal fluctuations at high temperature, resulting in the rare discovery of high-temperature ferroelectricity in 2D materials. Here, a chemical vapor deposition method is reported to synthesize 2D CuCrSe2 nanosheets. The crystal structure is confirmed by scanning transmission electron microscopy characterization. The measured ferroelectric phase transition temperature of ultrathin CuCrSe2 is about ≈800 K. Significantly, the switchable ferroelectric polarization is observed in ≈5.2 nm nanosheet. Moreover, the in-plane and out-of-plane ferroelectric response are modulated by different maximum bias voltage. This work provides a new insight into the construction of 2D ferroelectrics with high Curie temperature.

A Universal Strategy for Synthesis of 2D Ternary Transition Metal Phosphorous Chalcogenides.

The 2D ternary transition metal phosphorous chalcogenides (TMPCs) have attracted extensive research interest due to their widely tunable band gap, rich electronic properties, inherent magnetic and ferroelectric properties. However, the synthesis of TMPCs via chemical vapor deposition (CVD) is still challenging since it is difficult to control reactions among multi-precursors. Here, a subtractive element growth mechanism is proposed to controllably synthesize the TMPCs. Based on the growth mechanism, the TMPCs including FePS3 , FePSe3 , MnPS3 , MnPSe3 , CdPS3 , CdPSe3 , In2 P3 S9 , and SnPS3 are achieved successfully and further confirmed by Raman, second-harmonic generation (SHG), and scanning transmission electron microscopy (STEM). The typical TMPCs-SnPS3 shows a strong SHG signal at 1064 nm, with an effective nonlinear susceptibility χ(2) of 8.41 × 10-11  m V-1 , which is about 8 times of that in MoS2 . And the photodetector based on CdPSe3 exhibits superior detection performances with responsivity of 582 mA W-1 , high detectivity of 3.19 × 1011  Jones, and fast rise time of 611 µs, which is better than most previously reported TMPCs-based photodetectors. These results demonstrate the high quality of TMPCs and promote the exploration of the optical properties of 2D TMPCs for their applications in optoelectronics.

Two-Dimensional Cr5Te8@Graphite Heterostructure for Efficient Electromagnetic Microwave Absorption.

Two-dimensional (2D) transition metal chalcogenides (TMCs) hold great promise as novel microwave absorption materials owing to their interlayer interactions and unique magnetoelectric properties. However, overcoming the impedance mismatch at the low loading is still a challenge for TMCs due to the restricted loss pathways caused by their high-density characteristic. Here, an interface engineering based on the heterostructure of 2D Cr5Te8 and graphite is in situ constructed via a one-step chemical vapor deposit to modulate impedance matching and introduce multiple attenuation mechanisms. Intriguingly, the Cr5Te8@EG (ECT) heterostructure exhibits a minimum reflection loss of up to - 57.6 dB at 15.4 GHz with a thin thickness of only 1.4 mm under a low filling rate of 10%. The density functional theory calculations confirm that the splendid performance of ECT heterostructure primarily derives from charge redistribution at the abundant intimate interfaces, thereby reinforcing interfacial polarization loss. Furthermore, the ECT coating displays a remarkable radar cross section reduction of 31.9 dB m2, demonstrating a great radar microwave scattering ability. This work sheds light on the interfacial coupled stimulus response mechanism of TMC-based heterogeneous structures and provides a feasible strategy to manipulate high-quality TMCs for excellent microwave absorbers.

On-Chip Ultralow-Threshold Tunable CdSSe Nanobelt Lasers Excited by the Emission of Linked ZnO Nanowire.

The integration of optical waveguide and on-chip nanolasers source has been one of the trends in photonic devices. For on-chip nanolasers, the integration of nanowires and high antidamage ability are imperative. Herein, we realized the on-chip ultralow-threshold and wavelength-tunable lasing from alloyed CdSSe nanobelt chip that is excited by the emission from linked ZnO nanowires. ZnO nanowire arrays are integrated into CdSSe nanobelt chips by the dry transfer method. A one-dimensional (1D) ZnO nanowire forms high-quality optical resonators and serves as an indirect pumping light to stimulate CdSSe nanobelt chips, and then wavelength-tunable lasing is generated with the ultralow threshold of 3.88 µW. The lasing mechanism is quite different than direct excitation by nanosecond laser pulse and indirect pumping by ZnO emission. The ZnO-CdSSe blocks provide a new solution to realize nanowire lasing from linked nanowires rather than direct laser pumping and thus avoid the light direct damage under general nanosecond laser excitation.

On-chip programmable optical switch based on CdS multibranched nanowire arrays.

Micro/nano optoelectronic devices are widely studied as basic building blocks for on-chip integrated microsystem and multichannel logic units with excellent optoelectronic properties that are especially important part for interconnection route construction. Here, based on anisotropic waveguides, an optical switch with an on/off ratio of 2.14 is built up in a 2D CdS branched nanowire array. Because the branches are obliquely distributed at the same side of the trunk in a highly ordered form, the guided photoluminescence (PL) intensity from the trunk into the branch tightly relates to its angle. Based on the different intensity of the guided PL emitted from the end of each branch, the position of the incident spot in the backbone area can be identified accurately, making a feasible construction of an on-chip position-sensitive detector to realize an all-optical information process.

Variable selection from a feature representing protein sequences: a case of classification on bacterial type IV secreted effectors.

BACKGROUND: Classification of certain proteins with specific functions is momentous for biological research. Encoding approaches of protein sequences for feature extraction play an important role in protein classification. Many computational methods (namely classifiers) are used for classification on protein sequences according to various encoding approaches. Commonly, protein sequences keep certain labels corresponding to different categories of biological functions (e.g., bacterial type IV secreted effectors or not), which makes protein prediction a fantasy. As to protein prediction, a kernel set of protein sequences keeping certain labels certified by biological experiments should be existent in advance. However, it has been hardly ever seen in prevailing researches. Therefore, unsupervised learning rather than supervised learning (e.g. classification) should be considered. As to protein classification, various classifiers may help to evaluate the effectiveness of different encoding approaches. Besides, variable selection from an encoded feature representing protein sequences is an important issue that also needs to be considered. RESULTS: Focusing on the latter problem, we propose a new method for variable selection from an encoded feature representing protein sequences. Taking a benchmark dataset containing 1947 protein sequences as a case, experiments are made to identify bacterial type IV secreted effectors (T4SE) from protein sequences, which are composed of 399 T4SE and 1548 non-T4SE. Comparable and quantified results are obtained only using certain components of the encoded feature, i.e., position-specific scoring matix, and that indicates the effectiveness of our method. CONCLUSIONS: Certain variables other than an encoded feature they belong to do work for discrimination between different types of proteins. In addition, ensemble classifiers with an automatic assignment of different base classifiers do achieve a better classification result.

Adhesion loss mechanism based on carboxymethyl cellulose-filled hydrocolloid dressings in physiological wounds environment.

Adhesion loss of hydrocolloid wound dressings is ubiquitous clinical problem, which seriously reduces the therapeutic efficiency and patient experience. In order to address this problem, the clarification on adhesion loss mechanism and the development of effective alternatives of commercial hydrocolloid dressings are urgent and inevitable. Herein, adhesion loss mechanism of hydrocolloid dressings was investigated using sodium carboxymethyl cellulose (CMC)-filled hydrocolloid dressings exposing to physiological environment as model. The adhesion mechanism and contact angle tests were combined to obtain surface energy of dressings. The results indicated that the dissolution, swelling and exudation of CMC occurred successively (concentration reached 1.607 g/L after 10 h). The effused CMC led to the dramatic increase in surface energy (from 14.5-80.7 mN/m) and adhesion loss appeared. This work explored the origin of adhesion loss of hydrocolloid wound dressings and might promote the designing of hydrocolloid dressings with both excellent humidity control and sustained self-adhesiveness.