Theragnostic 64Cu/67Cu Radioisotopes Production With RFT-30 Cyclotron.

64Cu and 67Cu are theragnostic pair radionuclides with promising application in the nuclear medicine. 64Cu is PET nuclide for the non-invasive diagnosis and 67Cu is beta emitter for therapy of various cancers. This study discusses optimization efforts in the production of these radioactive coppers carried out with 30 MeV cyclotron. Optimized conditions include target preparation, chemical separation, and quality control. The production routes of 64Cu and 67Cu were studied based on the nuclear reactions of 64Ni(p,n)64Cu and 70Zn(p,α)67Cu. The produced 64Cu and 67Cu have >99.9% of the radionuclidic purity. The yield at the end of bombardment (EOB) of 64Cu and 67Cu is 28.5 MBq/µAh and 67Cu is 0.58 MBq/µAh, respectively.

Wetting Property Modification of Al2O3 by Helium Ion Irradiation: Effects of Beam Energy and Fluence on Contact Angle.

In imparting wetting properties, a fabrication process without the addition of new compounds and deposition of coating layers would be the most desirable because it does not introduce additional complexities. Hence, the ion beam irradiation technique is used as it enables the chemistry of materials to be modified through simple adjustments of irradiation parameters such as the type of accelerated particles, beam energy, and fluence. In this study, the hydrophilicity of alumina surfaces was weakened by irradiating He ion beams of different energy levels (200 keV and 20 MeV). These transitions become more pronounced as the total beam fluence increases. In low-energy irradiation, the effect of irradiation is predominant near the surface, and hydrophilicity is weakened by the increase in carbon adsorption and suppression of dissociative adsorption of water molecules owing to the introduction of oxygen vacancies. In contrast, nuclear transmutations are induced by irradiation with high-energy beams. Consequently, fluorine is generated, and hydrophobic functional groups are formed on the surface. By varying the beam conditions, the wetting properties of the target ceramic can be controlled to the desired level, which is required in various industries, via appropriate adjustments of the beam parameters. In addition, the beam irradiation technique may be applicable to all ceramic materials, including lattice oxygen and alumina.

Hydrophilicity Improvement of Polymer Surfaces Induced by Simultaneous Nuclear Transmutation and Oxidation Effects Using High-Energy and Low-Fluence Helium Ion Beam Irradiation.

Two commodity polymers, polystyrene (PS) and high-density polyethylene (HDPE), were irradiated by high-energy He ion beams at low fluence to examine the wettability changes at different fluences. The water contact angles of the PS and HDPE surfaces were reduced from 78.3° to 46.7° and 81.5° to 58.5°, respectively, upon increasing the fluence from 0 to 1 × 1013 He2+/cm2 for irradiation durations ≤4 min. Surface analyses were performed to investigate these wettability changes. Surface texture evaluations via scanning electron and atomic force microscopies indicated non-remarkable changes by irradiation. However, the chemical structures of the irradiated polymer surfaces were notable. The high-energy He ions induced nuclear transmutation of C to N, leading to C-N bond formation in the polymer chains. Further, C-O and C=O bonds were formed during irradiation in air because of polymer oxidation. Finally, amide and ester groups were generated by irradiation. These polar groups improved hydrophilicity by increasing surface energies. Experiments with other polymers can further elucidate the correlation between polymer structure and surface wettability changes due to high-energy low-fluence He ion irradiation. This method can realize simple and effective utilization of commercial cyclotrons to tailor polymer surfaces without compromising surface texture and mechanical integrity.

Chitosan-TiO2 composite: A potential 68Ge/68Ga generator column material.

A durable and ready to use 68Ge-68Ga generator column material is required for its routine use in radiopharmaceutical procedures. The present work comprises preliminary studies for development and evaluation of chitosan-TiO2 based microsphere (C-TOM) composite towards its competence as a column material. The batch uptake studies showed higher distribution coefficients for 68Ge vis-à-vis 68Ga in the complete concentration range of HCl examined (0.01-1 mol.L-1). Furthermore, C-TOM showed enduring physical and chemical stability in 0.01 mol.L-1 HCl with persistent 68Ga elution profiles (>95%) and negligible 68Ge breakthrough (2 × 10-4%) for the preliminary evaluation period of ∼2 months. Overall, the studies indicated that, 68Ga with high radionuclidic purity (≥99.99%) can be eluted routinely in a small volume (∼1.5 mL) of 0.01 mol.L-1 HCl proving its potentials as a novel solid phase extractant for 68Ge/68Ge generator system.

Red Blood Cell Membrane Bioengineered Zr-89 Labelled Hollow Mesoporous Silica Nanosphere for Overcoming Phagocytosis.

Biomimetic nanoparticles (NPs) have been actively studied for their biological compatibility due to its distinguished abilities viz. long-term circulation, low toxicity, ease for surface modification, and its ability to avoid phagocytosis of NPs by macrophages. Coating the NPs with a variety of cell membranes bearing the immune control proteins increases drug efficacy while complementing the intrinsic advantages of the NPs. In this study, efforts were made to introduce oxophilic radiometal 89Zr with hollow mesoporous silica nanospheres (HMSNs) having abundant silanol groups and were bioengineered with red blood cell membrane (Rm) having cluster of differentiation 47 (CD47) protein to evaluate its long-term in vivo behavior. We were successful in demonstrating the increased in vivo stability of synthesized Rm-camouflaged, 89Zr-labelled HMSNs with the markedly reduced 89Zr release. Rm camouflaged 89Zr-HMSNs effectively accumulated in the tumor by avoiding phagocytosis of macrophages. In addition, re-injecting the Rm isolated using the blood of the same animal helped to overcome the immune barrier. This novel strategy can be applied extensively to identify the long-term in vivo behavior of nano-drugs while enhancing their biocompatibility.

Development of fluorescent probes that bind and stain amyloid plaques in Alzheimer's disease.

ß-amyloid (Aß) plaques in the brain are composed of Aß40 and Aß42 peptides, and are the defining pathological feature of Alzheimer's disease (AD). Fluorescent probes that can detect Aß plaques have gained increasing interest as potential tools for in vitro and in vivo monitoring of the progression of AD. In this study, chalcone-mimic fluorescent probe 5 was designed and prepared. Probe 5 exhibited an approximately 50-fold increase in emission intensity after mixing with Aß42 aggregates, a high affinity for Aß42 aggregates (K D = 1.59 µM), and reasonable lipophilicity (log P value = 2.55). Probe 5 also exhibited specific staining of Aß plaques in the transgenic mice (APP/PS1) brain sections. Ex vivo fluorescence imaging of the brain from normal and TG mice revealed that probe 5 was able to penetrate the BBB and stain the Aß plaques. These results suggest that chalcone-mimic probe 5 possessed the requirements of a fluorescent probe for Aß plaques and may be useful in AD research.