Epistemological Alienation in Scientific Psychology.

This article presents the concept of epistemological alienation in order to examine psychology's epistemological quantitative Paradigm and its connection to political reality. Politzer's work of how mainstream psychology turns the first-person language of the individual into a mechanistic third-person pseudoscience is thoroughly discussed. Consequently, through some marginalized voices within psychology, it is examined how psychologists disregard the subject's own voice, intentionality, meaning and judgment-forming mechanisms promoting instead a naturalistic and mechanistic language, based heavily on psychometric methodology and a false and altered account of psychology's history. Psychology's mechanistic language is compared to Marx's concept of alienation, various aspects of which are discussed. The case is made that epistemological alienation is an internal process in psychological research that stems from and reinforces, essentializes and "epistemologizes" the alienation and the individualization of the modern subject.

Flow visualisation of a normal shock impinging over a rounded contour bump in a Mach 1.3 free-stream.

ABSTRACT: An experimental study has been conducted to visualise the instantaneous streamwise and spanwise flow patterns of a normal shock wave impinging over a rounded contour bump in a Mach 1.3 free-stream. A quartz-made transparent shock generator was used, so that instantaneous images could be captured during the oil-flow visualisation experiments. Fluorescent oil with three different colours was used in the surface oil-flow visualisation experiment to enhance the visualisation of flow mixing and complicated flow features that present in the flow field. Experimental data showed that the rounded contour bump could split the impinging normal shock wave into a or a series of lambda-shaped shock wave structure(s). In addition, it was found that the flow pattern and the shock wave structures that appeared over the rounded contour bump depended highly on the impinging location of the normal shock wave. The flow pattern shown in this study agreed with the findings documented in literature. Moreover, it was observed from the instantaneous oil streaks that the normal shock impinging location also affected the size and the formation location of the spanwise counter-rotating vortices downstream of the bump crest. Finally, it was concluded that the terminating shock could distort the oil streaks that left over the surface of the contour bump. Therefore, the use of the transparent normal shock wave generator is recommended when conducting experiments with normal shock wave impingement involved.

Static and Wind-on Performance of Polymer-Based Pressure-Sensitive Paints Using Platinum and Ruthenium as the Luminophore.

An experimental study has been conducted to investigate the static and wind-on performance of two in-house-developed polymer-based pressure-sensitive paints. Platinum tetrakis (pentafluorophenyl) porphyrin and tris-bathophenanthroline ruthenium II are used as the luminophores of these two polymer-based pressure-sensitive paints. The pressure and temperature sensitivity and the photo-degradation rate of these two pressure-sensitive paints have been investigated. In the wind tunnel test, it was observed that the normalised intensity ratio of both polymer-based pressure-sensitive paints being studied decreases with increasing the number of wind tunnel runs. The exact reason that leads to the occurrence of this phenomenon is unclear, but it is deduced that the luminophore is either removed or deactivated by the incoming flow during a wind tunnel test.

Penetration Characteristics of Air, Carbon Dioxide and Helium Transverse Sonic Jets in Mach 5 Cross Flow.

An experimental investigation of sonic air, CO2 and Helium transverse jets in Mach 5 cross flow was carried out over a flat plate. The jet to freestream momentum flux ratio, J, was kept the same for all gases. The unsteady flow topology was examined using high speed schlieren visualisation and PIV. Schlieren visualisation provided information regarding oscillating jet shear layer structures and bow shock, Mach disc and barrel shocks. Two-component PIV measurements at the centreline, provided information regarding jet penetration trajectories. Barrel shocks and Mach disc forming the jet boundary were visualised/quantified also jet penetration boundaries were determined. Even though J is kept the same for all gases, the penetration patterns were found to be remarkably different both at the nearfield and the farfield. Air and CO2 jet resulted similar nearfield and farfield penetration pattern whereas Helium jet spread minimal in the nearfield.

Luminescent measurement systems for the investigation of a scramjet inlet-isolator.

Scramjets have become a main focus of study for many researchers, due to their application as propulsive devices in hypersonic flight. This entails a detailed understanding of the fluid mechanics involved to be able to design and operate these engines with maximum efficiency even at their off-design conditions. It is the objective of the present cold-flow investigation to study and analyse experimentally the mechanics of the fluid structures encountered within a generic scramjet inlet at M = 5. Traditionally, researchers have to rely on stream-thrust analysis, which requires the complex setup of a mass flow meter, a force balance and a heat transducer in order to measure inlet-isolator performance. Alternatively, the pitot rake could be positioned at inlet-isolator exit plane, but this method is intrusive to the flow, and the number of pitot tubes is limited by the model size constraint. Thus, this urgent need for a better flow diagnostics method is addressed in this paper. Pressure-sensitive paint (PSP) has been applied to investigate the flow characteristics on the compression ramp, isolator surface and isolator sidewall. Numerous shock-shock interactions, corner and shoulder separation regions, as well as shock trains were captured by the luminescent system. The performance of the scramjet inlet-isolator has been shown to improve when operated in a modest angle of attack.

Pressure-sensitive paint measurements of transient shock phenomena.

Measurements of the global pressure field created by shock wave diffraction have been captured optically using a porous pressure-sensitive paint. The pressure field created by a diffracting shock wave shows large increases and decreases in pressure and can be reasonably accurately captured using CFD. The substrate, a thin-layer chromatography (TLC) plate, has been dipped in a luminophore solution. TLC plates are readily available and easy to prepare. Illumination comes from two high-intensity broadband Xenon arc light sources with short-pass filters. The sample is imaged at 100 kHz using a Vision Research Phantom V710 in conjunction with a pair of long and short pass filters, creating a band. The PSP results are compared with numerical simulations of the flow using the commercial CFD package Fluent as part of ANSYS 13 for two Mach numbers.

Pressure-sensitive paint: effect of substrate.

There are numerous ways in which pressure-sensitive paint can be applied to a surface. The choice of substrate and application method can greatly affect the results obtained. The current study examines the different methods of applying pressure-sensitive paint to a surface. One polymer-based and two porous substrates (anodized aluminum and thin-layer chromatography plates) are investigated and compared for luminescent output, pressure sensitivity, temperature sensitivity and photodegradation. Two luminophores [tris-Bathophenanthroline Ruthenium(II) Perchlorate and Platinum-tetrakis (pentafluorophenyl) Porphyrin] will also be compared in all three of the substrates. The results show the applicability of the different substrates and luminophores to different testing environments.

Greek police officers' attitudes towards the mentally ill.

The deinstitutionalization of the mentally ill and their shift into the community lead the police to play an important role in the management of acute psychiatric states. This study examines the attitudes of the Greek police towards the mentally ill, and the problems that arise during the transfer of mentally ill people to psychiatric emergency departments. Results highlight policemen misperceptions, and the difficulties encountered during transport procedures, which may be attributed to insufficient knowledge about mental illness and lack of training, respectively. Furthermore, this article discusses the need for police educational intervention, and the formation of specialized teams to improve the handling of mentally ill in crisis situations.

Thermographic Phosphors for High Temperature Measurements: Principles, Current State of the Art and Recent Applications.

This paper reviews the state of phosphor thermometry, focusing on developments in the past 15 years. The fundamental principles and theory are presented, and the various spectral and temporal modes, including the lifetime decay, rise time and intensity ratio, are discussed. The entire phosphor measurement system, including relative advantages to conventional methods, choice of phosphors, bonding techniques, excitation sources and emission detection, is reviewed. Special attention is given to issues that may arise at high temperatures. A number of recent developments and applications are surveyed, with examples including: measurements in engines, hypersonic wind tunnel experiments, pyrolysis studies and droplet/spray/gas temperature determination. They show the technique is flexible and successful in measuring temperatures where conventional methods may prove to be unsuitable.