RETRACTED: Anohova et al. The Dosidicus gigas Collagen for Scaffold Preparation and Cell Cultivation: Mechanical and Physicochemical Properties, Morphology, Composition and Cell Viability. Polymers 2023, 15, 1220.

The Polymers Editorial Office retracts the article, "The Dosidicus gigas Collagen for Scaffold Preparation and Cell Cultivation: Mechanical and Physicochemical Properties, Morphology, Composition and Cell Viability" [...].

The Dosidicus gigas Collagen for Scaffold Preparation and Cell Cultivation: Mechanical and Physicochemical Properties, Morphology, Composition and Cell Viability.

Directed formation of the structure of the culture of living cells is the most important task of tissue engineering. New materials for 3D scaffolds of living tissue are critical for the mass adoption of regenerative medicine protocols. In this manuscript, we demonstrate the results of the molecular structure study of collagen from Dosidicus gigas and reveal the possibility of obtaining a thin membrane material. The collagen membrane is characterized by high flexibility and plasticity as well as mechanical strength. The technology of obtaining collagen scaffolds, as well as the results of studies of its mechanical properties, surface morphology, protein composition, and the process of cell proliferation on its surface, are shown in the given manuscript. The investigation of living tissue culture grown on the surface of a collagen scaffold by X-ray tomography on a synchrotron source made it possible to remodel the structure of the extracellular matrix. It was found that the scaffolds obtained from squid collagen are characterized by a high degree of fibril ordering and high surface roughness and provide efficient directed growth of the cell culture. The resulting material provides the formation of the extracellular matrix and is characterized by a short time to living tissue sorption.

X-ray Tomographic Method to Study the Internal Structure of a TiNi-TiB2 Metal Matrix Composite Obtained by Direct Laser Deposition.

The field of additive manufacturing (AM) of various materials is rapidly developing. At the stage of designing and growing products and for the quality control of finished parts, non-destructive methods of analysis, in particular X-ray computed tomography (CT), are in demand. In addition to the advantages of non-destructive imaging of a wide range of materials in three dimensions, modern CT scanners offer a high contrast and high spatial resolution to provide digital information about their three-dimensional geometry and properties. Within the framework of this article, CT was used to follow the structural evolution of a TiNi-TiB2 metal-ceramic composite obtained by direct laser deposition. The relationship has been established between the additive method of production (layered direct laser deposition) and the formed layered structure of the product in the direction of growth. The porosity of the sample was calculated for each scan direction, and the average for the sample was 1.96%. The matrix of the TiNi-TiB2 composite is characterized by the presence of pores of various sizes, shapes and locations. Spherical voids prevail, but keyhole pores are also found. The heterogeneity of the structure was revealed in the form of clearly traced boundaries of the print layers, as well as differences in the density of the inner and outer regions of the composite.

The Effect of Cobalt on the Deformation Behaviour of a Porous TiNi-Based Alloy Obtained by Sintering.

This research investigates the effect of cobalt on the deformation behaviour of a porous TiNi-based alloy that was obtained by sintering. Porous TiNi-based alloys with cobalt additives, accounting for 0-2 at. % and with a pitch of 0.5, were obtained. The structural-phase state of the porous material was researched by X-ray structural analysis. The effect of different amounts of Co (used as an alloying additive) on the deformation behaviour was investigated by tensile to fracture. The fractograms of fracture of the experimental samples were analysed using scanning electron microscopy. For the first time, the present research shows a diagram of the deformation of a porous TiNi-based alloy that was obtained by sintering under tensile. The stages of deformation were described according to the physical nature of the processes taking place. The effect of the cobalt-alloying additive on the change in the critical stress of martensitic shear was investigated. It was found that the behaviour of the concentration dependency of stress at concentrations under 1.5 at. % Co was determined by an increase in the stress in the TiNi solid solution. This phenomenon is attributed to the arrangement of Co atoms on the Ti sublattice, as well as an increase in the fraction of the B19' phase in the matrix. The steep rise of the developed forces on the concentration dependency of the martensitic shear stress at 2 at. % Co is presumably attributed to the precipitation hardening of austenite due to the precipitation of finely dispersed coherent Ti3Ni4 phase following the decrease of fraction of martensite. An analysis of fractograms showed that as more cobalt was added, areas of fracture with traces of martensite plates of the B19' phase started to prevail. At 2 at. % Co these plates fill almost the entire area of the fracture. The research findings presented in this work are of great importance, since they can be used to achieve the set of physical and mechanical properties required for the development of biocompatible materials for implantology.

Chemical Composition and Content of Biologically Active Substances Found in Cotinus coggygria, Dactylorhiza maculata, Platanthera chlorantha Growing in Various Territories.

Medicinal plants (Cotinus coggygria, Dactylorhiza maculata, Platanthera chlorantha) growing in various territories (Kaliningrad, Moscow, and Minsk regions) were the objects of research. This paper presents a study of the chemical composition of these plants. To analyze the qualitative and quantitative composition of biologically active substances, the method of high-performance liquid chromatography was used. Atomic absorption spectrometry was used to study the content of trace elements. The content of organic acids and vitamins was determined by capillary electrophoresis using the Kapel-105/105M capillary electrophoresis system with high negative polarity. Extracts of medicinal plants were obtained on a Soxhlet apparatus using 70% ethanol as an extractant. It was found that among the biologically active substances in the plants under discussion, hyperoside, rutin (C. coggygria), Ferulic acid and Gallic acid (D. maculata), triene hydrocarbon (3,7-Dimethyl-1,3,6-octatriene), unsaturated alcohol (3,7-Dimethyl-2,6-octadien-1-ol), and benzyl acetate (P. chlorantha) prevailed. Samples of these medicinal plants contained trace elements (phosphorus, potassium, calcium, sodium, magnesium, and sulfur) and many aliphatic organic acids (succinic acid, benzoic acid, fumaric acid, citric acid, oxalic acid, and tartaric acid). The largest amount of biologically active substances and secondary metabolites of the studied plants from the Eastern Baltic is associated with climatic and ecological differences from other regions. The composition of these plants determines the potential of their use in feed additives for livestock and poultry as part of measures to improve the quality of livestock products. The use of medicinal plants for the production of feed additives is relevant in terms of improving regional economies, as well as improving the quality of life and nation's health by providing ecologically clean livestock products.