Relevance of the Implementation of Teeth in Three-Dimensional Vocal Tract Models.

Purpose: Recently, efforts have been made to investigate the vocal tract using magnetic resonance imaging (MRI). Due to technical limitations, teeth were omitted in many previous studies on vocal tract acoustics. However, the knowledge of how teeth influence vocal tract acoustics might be important in order to estimate the necessity of implementing teeth in vocal tract models. The aim of this study was therefore to estimate the effect of teeth on vocal tract acoustics. Method: The acoustic properties of 18 solid (3-dimensional printed) vocal tract models without teeth were compared to the same 18 models including teeth in terms of resonance frequencies (fRn). The fRn were obtained from the transfer functions of these models excited by white noise at the glottis level. The models were derived from MRI data of 2 trained singers performing 3 different vowel conditions (/i/, /a/, and /u/) in speech and low-pitched and high-pitched singing. Results: Depending on the oral configuration, models exhibiting side cavities or side branches were characterized by major changes in the transfer function when teeth were implemented via the introduction of pole-zero pairs. Conclusions: To avoid errors in modeling, teeth should be included in 3-dimensional vocal tract models for acoustic evaluation. Supplemental Material: https://doi.org/10.23641/asha.5386771.

Magnetic resonance imaging reveals functional anatomy and biomechanics of a living dragon tree.

Magnetic resonance imaging (MRI) was used to gain in vivo insight into load-induced displacements of inner plant tissues making a non-invasive and non-destructive stress and strain analysis possible. The central aim of this study was the identification of a possible load-adapted orientation of the vascular bundles and their fibre caps as the mechanically relevant tissue in branch-stem-attachments of Dracaena marginata. The complex three-dimensional deformations that occur during mechanical loading can be analysed on the basis of quasi-three-dimensional data representations of the outer surface, the inner tissue arrangement (meristem and vascular system), and the course of single vascular bundles within the branch-stem-attachment region. In addition, deformations of vascular bundles could be quantified manually and by using digital image correlation software. This combination of qualitative and quantitative stress and strain analysis leads to an improved understanding of the functional morphology and biomechanics of D. marginata, a plant that is used as a model organism for optimizing branched technical fibre-reinforced lightweight trusses in order to increase their load bearing capacity.

A Comparison of Different Methods to Generate Tooth Surface Models Without Applying Ionizing Radiation for Digital 3-Dimensional Image Fusion With Magnetic Resonance Imaging-Based Data of the Head and Neck Region.

OBJECTIVE: The 3-dimensional display of the vocal tract and teeth is necessary in numerous clinical and scientific contexts. Due to the different tissue properties this can only be achieved by combining different imaging techniques. A comparison of methods to record the tooth surface to create combined models of the vocal tract and teeth without applying ionizing radiation is displayed in this study. METHODS: Four methods to record the tooth surface were compared concerning their clinical accuracy after combination with magnetic resonance imaging (MRI)-based vocal tract models. With 2 of the presented methods the information of the tooth surface was obtained from MRI data. With the other 2 methods, the tooth surface was captured using a digital and a conventional impression technique. RESULTS: Impression techniques received the best rating results. CONCLUSIONS: The digital 3-dimensional image fusion of dental impression and MRI resulted in a virtual model of the vocal tract and teeth with a high clinical accuracy without applying ionizing radiation.

Fast PRF-based MR thermometry using double-echo EPI: in vivo comparison in a clinical hyperthermia setting.

OBJECTIVE: To develop and test in a clinical setting a double-echo segmented echo planar imaging (DEPI) pulse sequence for proton resonance frequency (PRF)-based temperature monitoring that is faster than conventional PRF thermometry pulse sequences and not affected by thermal changes in tissue conductivity. MATERIALS AND METHODS: Four tumor patients underwent between one and nine magnetic resonance (MR)-guided regional hyperthermia treatments. During treatment, the DEPI sequence and a FLASH PRF sequence were run in an interleaved manner to compare the results from both sequences in the same patients and same settings. Temperature maps were calculated based on the phase data of both sequences. Temperature measurements of both techniques were compared using Passing and Bablok regression and the Bland-Altman method. RESULTS: The temperature results from the DEPI and FLASH sequences, on average, do not differ by more than ΔT = 1 °C. DEPI images showed typically more artifacts and approximately a twofold lower signal-to-noise ratio (SNR), but a sufficient temperature precision of 0.5°, which would theoretically allow for a fivefold higher frame rate. CONCLUSION: The results indicate that DEPI can replace slower temperature measurement techniques for PRF-based temperature monitoring during thermal treatments. The higher acquisition speed can be exploited for hot spot localization during regional hyperthermia as well as for temperature monitoring during fast thermal therapies.