RESUMO
Space-based gravitational wave detectors are conceived to detect gravitational waves in the low frequency range by measuring the distance between proof masses in spacecraft separated by millions of kilometers. One of the key elements is the telescope which has to have a dimensional stability better than 1 pm Hz(-1/2) at 3 mHz. In addition, the telescope structure must be light, strong, and stiff. For this reason a potential telescope structure consisting of a silicon carbide quadpod has been designed, constructed, and tested. We present dimensional stability results meeting the requirements at room temperature. Results at -60 °C are also shown although the requirements are not met due to temperature fluctuations in the setup.
RESUMO
The laser interferometer space antenna (LISA) is a mission designed to detect low frequency gravitational waves. In order for LISA to succeed in its goal of direct measurement of gravitational waves, many subsystems must work together to measure the distance between proof masses on adjacent spacecraft. One such subsystem, the telescope, plays a critical role as it is the laser transmission and reception link between spacecraft. Not only must the material that makes up the telescope support structure be strong, stiff, and light, but it must have a dimensional stability of better than 1 pm Hz(-1/2) at 3 mHz and the distance between the primary and the secondary mirrors must change by less than 2.5 µm over the mission lifetime. Carbon fiber reinforced polymer is the current baseline material; however, it has not been tested to the pico meter level as required by the LISA mission. In this paper, we present dimensional stability results, outgassing effects occurring in the cavity and discuss its feasibility for use as the telescope spacer for the LISA spacecraft.
