RESUMO
We demonstrated, for the first time, micro-ring resonator assisted photothermal spectroscopy measurement of a gas phase sample. The experiment used a telecoms wavelength probe laser that was coupled to a silicon nitride photonic integrated circuit using a fibre array. We excited the photothermal effect in the water vapor above the micro-ring using a 1395 nm diode laser. We measured the 1f and 2f wavelength modulation response versus excitation laser wavelength and verified the power scaling behaviour of the signal.
RESUMO
We have designed and fabricated a 100 µm×100 µm four-sector binary subwavelength reflecting polarization microconverter in a gold film. Using finite-difference time-domain-aided numerical simulations and experiments, the micropolarizer was shown to convert an incident linearly polarized Gaussian beam of wavelength 532 nm into an azimuthally polarized beam. Conditions for generating on-axis regions of nonzero intensity when using propagating optical vortices with different initial polarization were deduced. By putting a spiral phase plate into an azimuthally polarized beam, the intensity pattern was shown to change from diffraction rings to a central peak.
RESUMO
We report the design, fabrication, and characterization of a new nanophotonic device comprising a two-dimensional photonic crystal (PhC) lens of size 3x4 microm fabricated in silicon-on-insulator. The PhC lens is put at the output of a planar waveguide of width 4.5 microm to couple light into a planar waveguide of width 1 microm, with two waveguides being of length 5 mm. A 1 microm off-axis displacement of the smaller waveguide leads to an 8-fold reduction of output light intensity, which means that the focal spot size at output of the PhC lens in silicon is less than 1 microm. The simulation has shown that the PhC lens has maximal transmittance at 1.55 microm, with the coupling efficiency being 73%. The focal spot size of the lens in air calculated at the FWHM is 0.32lambda (where lambda is the wavelength).