Probing microbubble targeting with atomic force microscopy.

Microbubble science is expanding beyond ultrasound imaging applications to biological targeting and drug/gene delivery. The characteristics of molecular targeting should be tested by a measurement system that can assess targeting efficacy and strength. Atomic force microscopy (AFM) is capable of piconewton force resolution, and is reported to measure the strength of single hydrogen bonds. An in-house targeted microbubble modified using the biotin-avidin chemistry and the CD31 antibody was used to probe cultures of Sk-Hep1 hepatic endothelial cells. We report that the targeted microbubbles provide a single distribution of adhesion forces with a median of 93pN. This interaction is assigned to the CD31 antibody-antigen unbinding event. Information on the distances between the interaction forces was obtained and could be important for future microbubble fabrication. In conclusion, the capability of single microbubbles to target cell lines was shown to be feasible with AFM.

Nanomechanical probing of microbubbles using the atomic force microscope.

Atomic force microscopy (AFM) is a versatile mechanical nanosensor that can be used to quantify the mechanical properties of microbubbles (MBs) and the adhesion mechanisms of targeted MBs. Mechanical properties were investigated using AFM tipless cantilevers to microcompress the MBs. The range of compressive stiffness for biSphere was found to be between 1 and 10Nm(-1) using a cantilever with a spring constant of 0.6 Nm(-1). This stiffness was shown to decrease with the MB size in a non-linear fashion. It is also possible to calculate a theoretical Young's modulus of the shell. The adhesion properties of targeted lipid based MBs that use avidin-biotin chemistry for the attachment of targeting ligands were also studied. The MBs were attached to poly-L-lysine treated tipless cantilevers with spring constants ranging from 0.03 to 0.1 Nm(-1). This system interrogated individual cells with pulling cantilever distance of 15 microm, and scan rate at 0.2 Hz. The depth of contact was not larger than 0.4 microm. The targeted MBs provided a significantly larger adhesion to the cells compared to control ones. Average adhesion force was dependent on depth of contact. Analysis of the data demonstrated a single distribution of adhesion events with median at 89 pN, which is in agreement with the literature for such interactions. The nanointerrogation of MBs using AFM provides new insight into their mechanical properties, and should be of assistance to MB design and manufacture.

Nanointerrogation of ultrasonic contrast agent microbubbles using atomic force microscopy.

Predicting the acoustic response of an encapsulated microbubble to ultrasound requires an accurate assessment of the mechanical properties of the microbubble shell. Atomic force microscopy (AFM) provides an unprecedented spatial and force resolution of the order of Angstroms and subnanonewtons, respectively. It is introduced here as a means to interrogate microbubbles manufactured for ultrasonic imaging. The advantage of AFM over scanning electron microscopy (SEM) is that the microbubbles need not be subjected to a low temperature or low-pressure environment. The microbubbles were interrogated in a liquid environment, which could potentially be a simulated physiological environment. AFM was used in tapping mode imaging to reveal topographical detail of biSphere microbubbles. Because microbubbles are large objects compared with the overall size of usual AFM tips, a convolution between the AFM tip and the microbubble was typical of the acquired topographies. However, a part of the top half of the bubble was imaged with nanometer resolution, and roughness measurements are reported. Force-distance curves were captured using contact mode AFM. The range of stiffness or effective spring constant of biSphere was found to be between 1 and 6 N m(-1). In conclusion, the AFM is proposed here for the first time as a tool to image the surface of bubbles at the nanometer range in liquid and to perform reproducible measurements on the mechanical properties of individual microbubbles.