RESUMO
We present an analysis of carrier dynamics of the single-photon detection process, i.e., from Geiger mode pulse generation to its quenching, in a single-photon avalanche diode (SPAD). The device is modeled by a parallel circuit of a SPAD and a capacitance representing both space charge accumulation inside the SPAD and parasitic components. The carrier dynamics inside the SPAD is described by time-dependent bipolar-coupled continuity equations (BCE). Numerical solutions of BCE show that the entire process completes within a few hundreds of picoseconds. More importantly, we find that the total amount of charges stored on the series capacitance gives rise to a voltage swing of the internal bias of SPAD twice of the excess bias voltage with respect to the breakdown voltage. This, in turn, gives a design methodology to control precisely generated charges and enables one to use SPADs as conventional photodiodes (PDs) in a four transistor pixel of a complementary metal-oxide-semiconductor (CMOS) image sensor (CIS) with short exposure time and without carrier overflow. Such operation is demonstrated by experiments with a 6 µm size 400 × 400 pixels SPAD-based CIS designed with this methodology.
RESUMO
We have developed a direct time-of-flight (TOF) 250 m ranging Complementary Metal Oxide Semiconductor (CMOS) image sensor (CIS) based on a 688 × 384 pixels array of vertical avalanche photodiodes (VAPD). Each pixel of the CIS comprises VAPD with a standard four transistor pixel circuit equipped with an analogue capacitor to accumulate or count avalanche pulses. High power near infrared (NIR) short (<50 ns) and repetitive (6 kHz) laser pulses are illuminated through a diffusing optics. By globally gating the VAPD, each pulse is counted in the in-pixel counter enabling extraction of sub-photon level signal. Depth map imaging with a 10 cm lateral resolution is realized from 1 m to 250 m range by synthesizing subranges images of photon counts. Advantages and limitation of an in-pixel circuit are described. The developed CIS is expected to supersede insufficient resolution of the conventional light detection and ranging (LiDAR) systems and the short range of indirect CIS TOF.
RESUMO
We developed multiocular 1/3-inch 2.75-µm-pixel-size 2.1M- pixel image sensors by co-design of both on-chip beam-splitter and 100-nm-width 800-nm-depth patterned inner meta-micro-lens for single-main-lens stereo camera systems. A camera with the multiocular image sensor can capture horizontally one-dimensional light filed by both the on-chip beam-splitter horizontally dividing ray according to incident angle, and the inner meta-micro-lens collecting the divided ray into pixel with small optical loss. Cross-talks between adjacent light field images of a fabricated binocular image sensor and of a quad-ocular image sensor are as low as 6% and 7% respectively. With the selection of two images from one-dimensional light filed images, a selective baseline for stereo vision is realized to view close objects with single-main-lens. In addition, by adding multiple light field images with different ratios, baseline distance can be tuned within an aperture of a main lens. We suggest the electrically selective or tunable baseline stereo vision to reduce 3D fatigue of viewers.
