Santalum Genus: phytochemical constituents, biological activities and health promoting-effects.

Santalum genus belongs to the family of Santalaceae, widespread in India, Australia, Hawaii, Sri Lanka, and Indonesia, and valued as traditional medicine, rituals and modern bioactivities. Sandalwood is reported to possess a plethora of bioactive compounds such as essential oil and its components (α-santalol and ß-santalol), phenolic compounds and fatty acids. These bioactives play important role in contributing towards biological activities and health-promoting effects in humans. Pre-clinical and clinical studies have shown the role of sandalwood extract as antioxidant, anti-inflammatory, antibacterial, antifungal, antiviral, neuroleptic, antihyperglycemic, antihyperlipidemic, and anticancer activities. Safety studies on sandalwood essential oil (EO) and its extracts have proven them as a safe ingredient to be utilized in health promotion. Phytoconstituents, bioactivities and traditional uses established sandalwood as one of the innovative materials for application in the pharma, food, and biomedical industry.

Antimicrobial Activity of Gemini Surfactants with Ether Group in the Spacer Part.

Due to their large possibility of the structure modification, alkylammonium gemini surfactants are a rapidly growing class of compounds. They exhibit significant surface, aggregation and antimicrobial properties. Due to the fact that, in order to achieve the desired utility effect, the minimal concentration of compounds are used, they are in line with the principle of greenolution (green evolution) in chemistry. In this study, we present innovative synthesis of the homologous series of gemini surfactants modified at the spacer by the ether group, i.e., 3-oxa-1,5-pentane-bis(N-alkyl-N,N-dimethylammonium bromides). The critical micelle concentrations were determined. The minimal inhibitory concentrations of the synthesized compounds were determined against bacteria Escherichia coli ATCC 10536 and Staphylococcus aureus ATCC 6538; yeast Candida albicans ATCC 10231; and molds Aspergillus niger ATCC 16401 and Penicillium chrysogenum ATCC 60739. We also investigated the relationship between antimicrobial activity and alkyl chain length or the nature of the spacer. The obtained results indicate that the synthesized compounds are effective microbicides with a broad spectrum of biocidal activity.

Disposable Food Packaging and Serving Materials-Trends and Biodegradability.

Food is an integral part of everyone's life. Disposable food serving utensils and tableware are a very convenient solution, especially when the possibility of the use of traditional dishes and cutlery is limited (e.g., takeaway meals). As a result, a whole range of products is available on the market: plates, trays, spoons, forks, knives, cups, straws, and more. Both the form of the product (adapted to the distribution and sales system) as well as its ecological aspect (biodegradability and life cycle) should be of interest to producers and consumers, especially considering the clearly growing trend of "eco-awareness". This is particularly important in the case of single-use products. The aim of the study was to present the current trends regarding disposable utensils intended for contact with food in the context of their biodegradability. This paper has summarized not only conventional polymers but also their modern alternatives gaining the attention of manufacturers and consumers of single-use products (SUPs).

Antifungal Activity of Polyoxometalate-Ionic Liquids on Historical Brick.

Moulds inhabiting mineral-based materials may cause their biodeterioration, contributing to inestimable losses, especially in the case of cultural heritage objects and architectures. Fungi in mouldy buildings may also pose a threat to human health and constitute the main etiological factor in building related illnesses. In this context, research into novel compounds with antifungal activity is of high importance. The aim of this study was to evaluate the antifungal activity of polyoxometalate-ionic liquids (POM-ILs) and their use in the eradication of moulds from historical brick. In the disc diffusion assay, all the tested POM-ILs inhibited growth of a mixed culture of moulds including Engyodontium album, Cladosporium cladosporioides, Alternaria alternata and Aspergillus fumigatus. These were isolated from the surfaces of historical brick barracks at the Auschwitz II-Birkenau State Museum in Oswiecim, Poland. POM-IL coatings on historical brick samples, under model conditions, showed that two compounds demonstrated very high antifungal activity, completely limiting mould growth and development. The antifungal activity of the POM-ILs appeared to stem from their toxic effects on conidia, as evidenced by environmental scanning transmission electron microscopy observations. The results herein indicated that POM-ILs are promising disinfectant materials for use not only on historical objects, but probably also on other mineral-based materials.

Antimicrobial Activity of Gemini Surfactants with Azapolymethylene Spacer.

A series of 21 azapolymethylene gemini surfactants were obtained. The synthesis of the title surfactants in one- or two-step reaction proceeds with good yields. The structure and the purity of the synthesized compounds were determined by 1H and 13C NMR, ESI-MS spectra, and elemental analysis. Moreover, 2D COSY, HMBC, and HSQC spectra were performed. The minimal inhibitory concentrations (MIC) of the synthesized compounds were determined against fungi: Candida albicans, Aspergillus niger, Penicillium chrysogenum and bacteria: Escherichia coli,Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis. Also, the critical micelle concentrations (CMC) were determined. The relationship between antimicrobial and surface activity and surfactant structure has been determined.

New Sulfur Organic Polymer-Concrete Composites Containing Waste Materials: Mechanical Characteristics and Resistance to Biocorrosion.

The aim of this study was to develop new sulfur-copolymer concrete composites using waste compounds that have good mechanical characteristics and show a resistance to biocorrosion. The comonomers used to synthesize the sulfur-organic copolymers were-90 wt. % sulfur; 5 wt. % dicyclopentadiene (DCPD); 5 wt. % organic monomers, styrene (SDS), 1-decene (SDD), turpentine (SDT), and furfural (SDF). The concrete composites based on sulfur-organic copolymers were filled with aggregates, sand, gravel, as well as additives and industrial waste such as fly ash or phosphogypsum. The sulfur-organic copolymers were found to be chemically stable (softening temperature, thermal stability, melting temperature, amount of recrystallized sulfur, and shore D hardness). Partial replacement of DCPD with other organic comonomers did not change the thermal stability markedly but did make the copolymers more elastic. However, the materials became significantly stiffer after repeated melting. All the tested copolymers were found to be resistant to microbial corrosion. The highest resistance was exhibited by the SDS-containing polymer, while the SDF polymer exhibited the greatest change due to the activity of the microorganisms (FTIR analysis and sulfur crystallization). The concrete composites with sulfur-organic copolymers containing DCPD, SDS, SDF, fly ash, and phosphogypsum were mechanically resistant to compression and stretching, had low water absorbance, and were resistant to factors, such as temperature and salt. Resistance to freezing and thawing (150 cycles) was not confirmed. The concrete composites with sulfur-organic copolymers showed resistance to bacterial growth and acid activity during 8 weeks of incubation with microorganisms. No significant structural changes were observed in the SDS composites after incubation with bacteria, whereas composites containing SDF showed slight changes (FTIR and microscopic analysis). The concrete composite containing sulfur, DCPD, SDS, sand, gravel, and fly ash was the most resistant to microbiological corrosion, based on the metabolic activity of the bacteria and the production of ergosterol by the molds after eight weeks of incubation. It was found that Thiobacillus thioparus was the first of the acidifying bacteria to colonize the sulfur concrete, decreasing the pH of the environment. The molds Penicillium chrysogenum, Aspergillus versicolor and Cladosporium herbarum were able to grow on the surface of the tested composites only in the presence of an organic carbon source (glucose). During incubation, they produced organic acids and acidified the environment. However, no morphological changes in the concretes were observed suggesting that sulfur-organic copolymers containing styrene could be used as engineering materials or be applied as binders in sulfur-concretes.

Multistep approach to control microbial fouling of historic building materials by aerial phototrophs.

The scientific multistep approach described herein is a result of two years of research into a control method against microbial fouling and biodeterioration of historic building materials by phototrophs. A series of tests were conducted to select the best antifouling agent for eliminating 'green' coatings and protecting surfaces against biofouling. Of the seven active compounds, two with the best penetration abilities were subjected to a photosynthetic activity inhibition test using confocal microscopy. Of the two, a quaternary ammonium salt (QAC) - didecyldimethylammonium chloride (DDAC) - was found to be the most effective. Ten biocides containing QACs at different concentrations were then tested against 'green' coatings on wood, brick and plaster, with the best four being selected for further research in model conditions. As a result, biocides containing >14% (v v-1) DDAC were found to be successful antifouling agents for protecting historical materials against biodeterioration by phototrophs.

Viability, Enzymatic and Protein Profiles of Pseudomonas aeruginosa Biofilm and Planktonic Cells after Monomeric/Gemini Surfactant Treatment.

This study set out to investigate the biological activity of monomeric surfactants dodecyltrimethylammonium bromide (DTAB) and the next generation gemini surfactant hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) (C6) against the environmental strain Pseudomonas aeruginosa PB_1. Minimal inhibitory concentrations (MIC) were determined using the dilution method. The viability of the planktonic cells and biofilm was assessed using the plate count method. Enzymatic profile was determined using the API-ZYM system. Proteins were extracted from the biofilm and planktonic cells and analysed using SDS-PAGE. The MIC of the gemini surfactants was 70 times lower than that of its monomeric analogue. After 4 h of treatment at MIC (0.0145 mM for C6 and 1.013 mM for DTAB), the number of viable planktonic cells was reduce by less than 3 logarithm units. At the concentration ≥MIC, a reduction in the number of viable cells was observed in mature biofilms (p < 0.05). Treatment for 4 h with gemini surfactant at 20 MIC caused complete biofilm eradication. At sub-MIC, the concentration of some enzymes reduced and their protein profiles changed. The results of this study show that due to its superior antibacterial activity, gemini compound C6 can be applied as an effective microbiocide against P. aeruginosa in both planktonic and biofilm forms.

Impact of Cationic and Neutral Gemini Surfactants on Conidia and Hyphal Forms of Aspergillus brasiliensis.

This study investigates the biological activity of two cationic gemini surfactants, hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) C6 and pentamethylene-1,5-bis-(N,N-dimethyl-N-dodecyla,.mmonium bromide) C5, and their two neutral analogs, hexamethylene-1,6-bis-(N-methyl-N-dodecylamine) (A6) and pentamethylene-1,5-bis-(N-methyl-N-dodecylamine) (A5). Experiments were performed with Aspergillus brasiliensis, which is used in the standard tests for biocides. The minimal inhibitory concentration (MIC) values for conidia and mycelium were determined using the dilution method. The viability of the conidia was evaluated using the plate count method. The dry mass of the mycelium was determined using the thermogravimetric method. Ergosterol was extracted from the mycelium and evaluated by gas chromatography. The effect of gemini surfactants on fungal morphology was observed using scanning electron microscopy. Cationic gemini surfactants were found to be active at lower concentrations compared to their non-ionic analogues, rapidly reducing the total number of conidia that were able to grow. They also decreased both the ergosterol content in the mycelium and its dry weight. These results suggest that cationic gemini surfactants C6 and C5 could have a wide range of practical applications as active compounds. However, it should be remembered that usage at too low concentrations, below the MIC, will only lead to short-term disturbances in the development of conidia and mycelium.

Action of Monomeric/Gemini Surfactants on Free Cells and Biofilm of Asaia lannensis.

We investigated the biological activity of surfactants based on quaternary ammonium compounds: gemini surfactant hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) (C6), synthesized by the reaction of N,N-dimethyl-N-dodecylamine with 1,6-dibromohexane, and its monomeric analogue dodecyltrimethylammonium bromide (DTAB). The experiments were performed with bacteria Asaia lannensis, a common spoilage in the beverage industry. The minimal inhibitory concentration (MIC) values were determined using the tube standard two-fold dilution method. The growth and adhesive properties of bacterial cells were studied in different culture media, and the cell viability was evaluated using plate count method. Both of the surfactants were effective against the bacterial strain, but the MIC of gemini compound was significantly lower. Both C6 and DTAB exhibited anti-adhesive abilities. Treatment with surfactants at or below MIC value decreased the number of bacterial cells that were able to form biofilm, however, the gemini surfactant was more effective. The used surfactants were also found to be able to eradicate mature biofilms. After 4 h of treatment with C6 surfactant at concentration 10 MIC, the number of bacterial cells was reduced by 91.8%. The results of this study suggest that the antibacterial activity of the gemini compound could make it an effective microbiocide against the spoilage bacteria Asaia sp. in both planktonic and biofilm stages.

Synthesis, Structure, Surface and Antimicrobial Properties of New Oligomeric Quaternary Ammonium Salts with Aromatic Spacers.

New dimeric, trimeric and tetrameric quaternary ammonium salts were accomplished by reaction of tertiary alkyldimethyl amines with appropriate bromomethylbenzene derivatives. A series of new cationic surfactants contain different alkyl chain lengths (C4-C18), aromatic spacers and different numbers of quaternary nitrogen atoms. The structure of the products was confirmed by spectral analysis (FT-IR, ¹H-NMR, 13C-NMR and 2D-NMR), mass spectroscopy (ESI-MS), elemental analysis, as well as PM5 semiempirical methods. Compound (21) was also analyzed using X-ray crystallography. Critical micelle concentration (CMC) of 1,4-bis-[N-(1-alkyl)-N,N-dimethylammoniummethyl]benzene dibromides (3-9) was determined to characterize the aggregation behavior. The antimicrobial properties of novel QACs (Quaternary Ammonium Salts) were examined to set their minimal inhibitory concentration (MIC) values against fungi Aspergillus niger, Candida albicans, Penicillium chrysogenum and bacteria Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa.

Synthesis, Structure and Antimicrobial Properties of Novel Benzalkonium Chloride Analogues with Pyridine Rings.

Quaternary ammonium compounds (QACs) are a group of compounds of great economic significance. They are widely used as emulsifiers, detergents, solubilizers and corrosion inhibitors in household and industrial products. Due to their excellent antimicrobial activity QACs have also gained a special meaning as antimicrobials in hospitals, agriculture and the food industry. The main representatives of the microbiocidal QACs are the benzalkonium chlorides (BACs), which exhibit biocidal activity against most bacteria, fungi, algae and some viruses. However, the misuses of QACs, mainly at sublethal concentrations, can lead to an increasing resistance of microorganisms. One of the ways to avoid this serious problem is the introduction and use of new biocides with modified structures instead of the biocides applied so far. Therefore new BAC analogues P13-P18 with pyridine rings were synthesized. The new compounds were characterized by NMR, FT-IR and ESI-MS methods. PM3 semiempirical calculations of molecular structures and the heats of formation of compounds P13-P18 were also performed. Critical micellization concentrations (CMCs) were determined to characterize the aggregation behavior of the new BAC analogues. The antimicrobial properties of novel QACs were examined by determining their minimal inhibitory concentration (MIC) values against the fungi Aspergillus niger, Candida albicans, Penicillium chrysogenum and bacteria Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Pseudomonas aeruginosa. The MIC values of N,N-dimethyl-N-(4-methylpyridyl)-N-alkylammonium chlorides for fungi range from 0.1 to 12 mM and for bacteria, they range from 0.02 to 6 mM.

Protection of Historical Wood against Microbial Degradation-Selection and Application of Microbiocides.

The aim of this study was to select effective and safe microbiocides for the disinfection and protection of historical wooden surfaces at the former Auschwitz II-Birkenau concentration and extermination camp. We tested seven active compounds against bacteria and moulds, of which didecyldimethylammonium chloride and N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine were effective even at 0.02%-2%. Subsequently, eight microbiocides containing the selected active ingredients were chosen and applied three times on the surface of wood samples colonized by bacteria and moulds. ABM-1 and ABM-2-6% solution; Rocima 101-8%; Preventol R 80-12%; Acticide 706 LV-15% and Boramon-30% were the most effective disinfectants. Under laboratory conditions, ABM-1, Boramon and Rocima 101 ensured antimicrobial protection of new wood samples for six months. In situ, 30% Boramon and 8% Rocima 101 applied by spraying effectively protected the historical wood from bacterial and mould growth for 12 and 3 months, respectively. Colour and luminance of the new wood were not altered after exposure to the biocides. Boramon and Rocima 101, applied by the spraying method, caused no significant change in the colour of the historical wood. Results from this study were used to develop a procedure for the protection of wood in historical buildings against biodeterioration.

Quaternary ammonium biocides as antimicrobial agents protecting historical wood and brick.

Quaternary ammonium compounds (QACs) are widely used in disinfection of water, surfaces and instruments as well as in textile, leather and food industries because of their relatively low toxicity, broad antimicrobial spectrum, non-volatility and chemical stability. Due to these advantages, QACs are also used in restoration and can be applied on historical material. The aim of this study was to determine the usefulness of biocides based on quaternary ammonium salts and containing various excipients in the protection of historical materials against microbial growth. The study determined the antimicrobial activity of three biocides against bacteria: Pseudomonas fluorescens, Staphylococcus equorum, Bacillus cereus, Bacillus muralis, Sporosarcina aquimarina and Rhodococcus fascians, and moulds: Chaetomium globosum, Penicillium citreonigrum, Cladosporium cladosporioides I, Acremonium strictum, Aspergillus fumigatus and Cladosporium cladosporioides II, all isolated from historical wood and brick. Staphylococcus equorum, Bacillus cereus, Sporosarcina aquimarina and Rhodococcus fascians bacteria, and Cladosporium cladosporioides I and Acremonium strictum moulds showed high sensitivity to quaternary ammonium biocides. Historical wood can be effectively disinfected by three applications of biocide A (30% v/v) containing dodecyl dimethyl ammonium chloride (DDAC), citric acid, propiconazole and propanol. Disinfection of historical brick can be carried out by three applications of 6% v/v solutions of biocide B (based on DDAC and ethylenediaminetetraacetic acid - EDTA) or biocide C (containing a non-ionic surfactant, DDAC and EDTA). Effective protection of historical building materials against microbial growth for a period of seven days can be achieved by the application of biocide A (30% v/v) on the wood surface and biocide B (6% v/v) on the brick surface.

Monomeric and gemini surfactants as antimicrobial agents - influence on environmental and reference strains.

Quaternary ammonium salts (QAS) belong to surfactant commonly used both, in the household and in different branches of industry, primarily in the process of cleaning and disinfection. They have several positive features inter alia effectively limiting the development of microorganisms on many surfaces. In the present work, two compounds were used as biocides: hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) that belongs to the gemini surfactant (GS), and its single analogue - dodecyl(trimethyl)ammonium bromide (DTAB). Two fold dilution method was used to determine the minimum concentration of compounds (MIC) which inhibit the growth of bacteria: Staphylococcus aureus (ATCC 6538 and an environmental strain), Pseudomonas aeruginosa (ATCC 85327 and an environmental strain), and yeast Candida albicans (ATCC 11509 and an environmental strain). The viability of cells in liquid cultures with addition of these substances at » MIC, ½ MIC and MIC concentrations were also determined. The obtained results show that DTAB inhibits the growth of bacteria at the concentration of 0.126-1.010 µM/ml, and gemini surfactant is active at 0.036-0.029 µM/ml. Therefore, GS is active at more than 17-70-fold lower concentrations than its monomeric analogue. Strains isolated from natural environment are less sensitive upon testing biocides than the references strains. Both compounds at the MIC value reduced the number of cells of all strains. The use of too low concentration of biocides can limit the growth of microorganisms, but often only for a short period of time in case of special environmental strains. Later on, they can adapt to adverse environmental conditions and begin to evolve defence mechanisms.

Abiotic determinants of the historical buildings biodeterioration in the former Auschwitz II-Birkenau concentration and extermination camp.

The paper presents the results of a study conducted at the Auschwitz-Birkenau State Museum in Oswiecim on the occurrence of biodeterioration. Visual assessment of the buildings revealed signs of deterioration of the buildings in the form of dampness, bulging and crumbling plaster, and wood fiber splitting. The external surfaces, and especially the concrete strips and ground immediately adjoining the buildings, were colonized by bryophytes, lichens, and algae. These organisms developed most intensively close to the ground on the northern sides of the buildings. Inside the buildings, molds and bacteria were not found to develop actively, while algae and wood-decaying fungi occurred locally. The factors conducive to biological corrosion in the studied buildings were excessive dampness of structural partitions close to the ground and a relative air humidity of above 70%, which was connected to ineffective moisture insulation. The influence of temperature was smaller, as it mostly affected the quantitative composition of the microorganisms and the qualitative composition of the algae. Also the impact of light was not very strong, but it was conducive to algae growth.

Diversity of an aerial phototrophic coating of historic buildings in the former Auschwitz II-Birkenau concentration camp.

Aerial phototrophs colonize materials of anthropogenic origin, thus contributing to their biodeterioration. Structures preserved at the former Auschwitz II-Birkenau concentration and extermination camp show signs of degradation by cyanobacteria and algae. In order to protect the Auschwitz-Birkenau Memorial Site, diversity of aerial phototrophs growing on the historic buildings has been studied. Analyses of cyanobacterial and algal biofilms growing on various construction substrates were carried out in summer and winter. Multivariate data analyses were used to: characterize the diversity of cyanobacteria and algae growing in brick and wooden camp buildings depending on the research season, indicate preferences of cyanobacteria and algae in colonizing substrates, and to predict the environmental factor that most determines the growth of phototrophs. The biofilms were formed mainly by cyanobacteria, green algae and diatoms. The amount of cyanobacteria and algae in the biofilms was varied, which resulted from changes in climatic conditions, the type of substrate and the height at which the biofilms developed. In the summer, the ratio of cyanobacteria and algae groups was balanced, while in the winter, green algae and diatoms were dominant. Green algae showed a preference for colonizing plaster, wood and concrete, of which the walls and doors of the buildings were made. Their participation was correlated with a height gradient. Cyanobacteria and diatoms grew on bricks and soil on the floor of the buildings and temperature and relative humidity were the factors that modified their amount. Green algae were more cosmopolitan-occurred in dry places, potentially inaccessible to other organisms; therefore, they have been identified as the pioneer group in the prevailing climatic conditions.

Assessment of biological colonization of historic buildings in the former Auschwitz II-Birkenau concentration camp.

The objective of this study was to assess biological colonization of wooden and brick buildings in the former Auschwitz II-Birkenau concentration camp, and to identify the organisms colonizing the examined buildings. Microbiological analysis did not reveal increased microbial activity, and the total microbial count of the barrack surfaces did not exceed 103 CFU/100 cm2. However, certain symptoms of biodegradation of the buildings were observed. The predominant microflora consisted of bacteria of the genera Bacillus, Sporosarcina, Pseudomonas, Micrococcus, Streptomyces, and Staphylococcus, as well as fungi of the genera Acremonium, Cladosporium, Alternaria, Humicola, Penicillium, and Chaetomium. The microflora patterns varied both in wooden and brick buildings. The structural elements of wooden and brick barracks, and especially of the floors and lower parts of bathroom walls, were infected by cyanobacteria and algae, with the most numerous being cyanobacteria of the genera Scytonema, Chroococcus, Gloeothece, Leptolyngbya, diatoms of the genus Diadesmis, and chlorophytes of the genera Chlorella and Apatococcus. The outer surfaces of the examined buildings were primarily colonized by lichens and bryophytes, with nearly 30 species identified. The dominant species of lichens belonged to the genera Candelariella, Caloplaca, Lecanora, Lecidea, Lepraria, Physcia, and Protoparmeliopsis, and those of bryophytes to the genera Bryum, Ceratodon, Marchantia, and Tortula. The quantity and species diversity of lichens and mosses were much lower in wooden barracks than in brick ones. The external surfaces of those barracks were only affected by Lecanora conizaeoides, Lecanora symmicta, Lepraria cf. incana, and Strangospora pinicola. The study results revealed vast biodiversity among the species colonizing historic buildings. The presence of these groups of organisms, resulting from their natural expansion in the environment, is undesirable, as their excessive growth and spread may lead to progressive biodegradation of buildings. Our assessment of biological contamination will enable the development of a disinfection and conservation plan for the examined buildings.

Synthesis, molecular structure, spectral properties and antifungal activity of polymethylene-α,ω-bis(N,N- dimethyl-N-dodecyloammonium bromides).

Hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide), pentamethylene-1,5-bis(N,N-dimethyl-N-dodecylammonium bromide), tetramethylene-1,4-bis(N,N-dimethyl-N-dodecylammonium bromide), trimethylene-1,3-bis(N,N-dimethyl-N-dodecylammonium bromide) and ethylene-1,2-bis(N,N-dimethyl-N-dodecylammonium bromide) have been obtained and characterized by FTIR and NMR spectroscopy. DFT calculations have also been carried out. The optimized bond lengths, bond angles and torsion angles calculated by Hartree-Fock/3-21G(d,p) approach have been presented. MIC values for A. niger, P. chrysogenum, C. albicans have been determined and the relationship between MIC and spacer length has been discussed.

Influence of N,N-bis(3-aminopropyl)dodecylamine on the mycelium growth and the cell wall composition of resistance and sensitive strains belonging to the genus Aspergillus.

Resistance causes of moulds to N,N-bis(3-aminopropyl)dodecylamine (APDA) for selected species of Aspergillus niger and Aspergillus flavus was examined. Control (sensitive) strains and resistant strains, cultured at 0.05% triamine, were used in the experiments. The non-resistant strains did not have growth capacity in this amount of ADPA while the resistant strains were characterised by a smaller biomass increase. Individual stages of the development of the mycelium occurred later than those in the control samples. The participation of the cell wall in the mycelium biomass of the resistant strains was higher by 7.5%. The glucan content in the wall dry mass was lower by 11% than that in the sensitive strains. A 41% increase in the lipid content was recorded in the cell wall of resistant Aspergillus flavus. A 21% protein increase occurred in the wall of Aspergillus niger comparing to the control strain. Infrared spectrophotometric analysis of the cell wall did not reveal the presence of triamine. Most absorption bands disappeared in the wall of Aspergillus flavus while no additional absorption bands were registered in Aspergillus niger; some bands were only stronger than those in the control sample. The resistant strains were characterised by a smaller ergosterol content, the main constituent of cell membranes. Spectrophotometric analysis of the mycelium did not reveal significant qualitative changes; only quantitative changes were observed. It was noticed that the resistance reaction did not occur with the same intensity in both species studied. The resistant strain of Aspergillus niger was characterised by a slightly more intensive absorption within its entire spectrum range in comparison to control strain. In case of Aspergillus flavus the absorption was higher for control strain.