Tagging mortality in acoustic telemetry studies: Insights from a multispecies analysis.

The widespread adoption of acoustic telemetry has transformed our understanding of marine species' behavior and movement ecology. However, accurately interpreting telemetry data, especially concerning tagging mortality, is essential for drawing valid conclusions. In this study, we scrutinized tagging mortality in 223 individuals across 14 species and evaluated the impact of tagging methodologies, including capture method and size effects. Results reveal high tagging survival rates overall, attributable to the resiliency of the studied species and the rigorous animal welfare protocols followed during tagging procedures. Our results highlight the importance of tailoring array designs to the specific mobility patterns of the studied species for accurate survival assessments. This research contributes to generalizing mortality assessments and clearing the path for more precise and reliable telemetry studies in the future.

Genetic Analysis as a Tool to Improve the Monitoring of Stranded Cetaceans in Chile.

Cetacean strandings are a valuable source of information for several studies from species richness to conservation and management. During the examination of strandings, taxonomic and sex identification might be hindered for several reasons. Molecular techniques are valuable tools to obtain that missing information. This study evaluates how gene fragment amplification protocols can support the records of strandings done in the field in Chile by identifying, corroborating, or correcting the identification of the species and sex of the recorded individuals. Through a collaboration between a scientific laboratory and government institution in Chile, 63 samples were analyzed. Thirty-nine samples were successfully identified to the species level. In total, 17 species of six families were detected, including six species of conservation interest. Of the 39 samples, 29 corresponded to corroborations of field identifications. Seven corresponded to unidentified samples and three to corrected misidentifications, adding up to 28% of the identified samples. Sex was successfully identified for 58 of the 63 individuals. Twenty were corroborations, 34 were previously unidentified, and four were corrections. Applying this method improves the stranding database of Chile and provides new data for future management and conservation tasks.

eIg-based bispecific T-cell engagers targeting EGFR: Format matters.

Bispecific antibodies are molecules with versatile modes of action and applications for therapy. They are commonly developed as T-cell engagers (TCE), which simultaneously target an antigen expressed by tumor cells and CD3 expressed by T-cells, thereby inducing T-cell-mediated target cell killing. There is growing evidence that the molecular composition and valency for the target antigen influence the activity of TCEs. Here, the eIg platform technology was used to generate a set of bispecific TCEs targeting epidermal growth factor receptors (EGFR) and CD3. These molecules either included or lacked an Fc region and exhibited one binding site for CD3 and either one or two binding sites for EGFR (1 + 1 or 2 + 1 formats) utilizing different molecular arrangements of the binding sites. In total, 11 different TCE formats were analyzed for binding to target cells and T cells, T cell-mediated killing of tumor cells, and for the activation of T cells (release of cytokines and proliferation of T-cells). Bivalent binding to EGFR strongly increased binding and T cell-mediated killing. However, the molecular composition and position of the CD3-binding arm also affected target cell killing, cytokine release, and T-cell proliferation. Our findings support that screening of a panel of formats is beneficial to identify the most potent bispecific TCE, and that format matters.

Worst-Case X-ray Photon Energies in Ultrashort Pulse Laser Processing.

Ultrashort pulse laser processing can result in the secondary generation of unwanted X-rays if a critical laser irradiance of about 1013 W cm-2 is exceeded. Spectral X-ray emissions were investigated during the processing of tungsten and steel using three complementary spectrometers (based on CdTe and silicon drift detectors) simultaneously for the identification of a worst-case spectral scenario. Therefore, maximum X-ray photon energies were determined, and corresponding dose equivalent rates were calculated. An ultrashort pulse laser workstation with a pulse duration of 274 fs, a center wavelength of 1030 nm, pulse repetition rates between 50 kHz and 200 kHz, and a Gaussian laser beam focused to a spot diameter of 33 µm was employed in a single pulse and burst laser operation mode. Different combinations of laser pulse energy and repetition rate were utilized, keeping the average laser power constant close to the maximum power of 20 W. Peak irradiances I0 ranging from 7.3 × 1013 W cm-2 up to 3.0 × 1014 W cm-2 were used. The X-ray dose equivalent rate increases for lower repetition rates and higher pulse energy if a constant average power is used. Laser processing with burst mode significantly increases the dose rates and the X-ray photon energies. A maximum X-ray photon energy of about 40 keV was observed for burst mode processing of tungsten with a repetition rate of 50 kHz and a peak irradiance of 3 × 1014 W cm-2.

Enhanced X-ray Emissions Arising from High Pulse Repetition Frequency Ultrashort Pulse Laser Materials Processing.

The ongoing trend in the development of powerful ultrashort pulse lasers has attracted increasing attention for this technology to be applied in large-scale surface engineering and modern microfabrication. However, the emission of undesired X-ray photon radiation was recently reported even for industrially relevant laser irradiation regimes, causing serious health risks for laser operators. In the meantime, more than twenty influencing factors have been identified with substantial effects on X-ray photon emission released by ultrashort pulse laser processes. The presented study on enhanced X-ray emission arising from high pulse repetition frequency ultrashort pulse laser processing provides new insights into the interrelation of the highest-contributing parameters. It is verified by the example of AISI 304 substrates that X-ray photon emission can considerably exceed the legal dose rate limit when ultrashort laser pulses with peak intensities below 1 × 1013 W/cm² irradiate at a 0.5 MHz pulse repetition frequency. The peak intensity threshold value for X-ray emissions decreases with larger laser spot sizes and longer pulse durations. Another key finding of this study is that the suction flow conditions in the laser processing area can affect the released X-ray emission dose rate. The presented results support the development of effective X-ray protection strategies for safe and risk-free ultrashort pulse laser operation in industrial and academic research applications.

Study on X-ray Emission Using Ultrashort Pulsed Lasers in Materials Processing.

The interaction of ultrashort pulsed laser radiation with intensities of 1013 W cm-2 and above with materials often results in an unexpected high X-ray photon flux. It has been shown so far, on the one hand, that X-ray photon emissions increase proportionally with higher laser power and the accumulated X-ray dose rates can cause serious health risks for the laser operators. On the other hand, there is clear evidence that little variations of the operational conditions can considerably affect the spectral X-ray photon flux and X-ray emissions dose. In order to enhance the knowledge in this field, four ultrashort pulse laser systems for providing different complementary beam characteristics were employed in this study on laser-induced X-ray emissions, including peak intensities between 8 × 1012 W∙cm-2 < I0 < 5.2 × 1016 W∙cm-2, up to 72.2 W average laser power as well as burst/bi-burst processing mode. By the example of AISI 304 stainless steel, it was verified that X-ray emission dose rates as high as H˙' (0.07) > 45 mSv h-1 can be produced when low-intensity ultrashort pulses irradiate at a small 1 µm intra-line pulse distance during laser beam scanning and megahertz pulse repetition frequencies. For burst and bi-burst pulses, the second intra-burst pulse was found to significantly enhance the X-ray emission potentially induced by laser pulse and plasma interaction.

Backward Flux Re-Deposition Patterns during Multi-Spot Laser Ablation of Stainless Steel with Picosecond and Femtosecond Pulses in Air.

We report on novel observations of directed re-deposition of ablation debris during the ultrafast laser micro-structuring of stainless steel in the air with multi-beams in close proximity on the surface. This interesting phenomenon is observed with both 10 ps and 600 fs NIR laser pulses at 5 kHz repetition rate. Ablation spot geometries could be altered with the use of beam splitting optics or a phase-only Spatial Light modulator. At low fluence (F ~ 1.0 J cm-2) and pulse exposure of a few hundred pulses, the debris appears as concentrated narrow "filaments" connecting the ablation spots, while at higher fluence, (F ~ 5.0 J cm-2) energetic jets of material emanated symmetrically along the axes of symmetry, depositing debris well beyond the typical re-deposition radius with a single spot. Patterns of backward re-deposition of debris to the surface are likely connected with the colliding shock waves and plasma plumes with the ambient air causing stagnation when the spots are in close proximity. The 2D surface debris patterns are indicative of the complex 3D interactions involved over wide timescales during ablation from picoseconds to microseconds.

Time-resolved visualization of high-repetition ultrashort pulse laser ablation.

A pump-probe setup including a Robert-cell-type delay stage is calculated and built in the presented study. The goal is to visualize laser beam material interactions upon highly repetitive ultrashort pulse irradiations by shadowgraph imaging, which makes a valuable contribution to clarify the occurring interaction phenomena in this field. Ultrashort laser pulses (λ=1030nm; τ H =400fs) are irradiated onto a bright-rolled stainless steel metal plate (AISI 316). The high-speed shadowgraph sequences are captured for the time-resolved imaging of plasma and shockwave evolution during material ablation. The captured time frame ranges from the time just before the next pulse irradiates the interaction zone until 2 µs after pulse irradiation. The first part of the experimental study features the shockwave dynamics and evolution of the laser plasma/ablation plume as induced upon single-pulse irradiations. It is shown that the expansion velocity of the shockwave decreases from 10 km/s shortly after pulse irradiation to 6.1 km/s at 41 ns after pulse irradiation. The second part deals with laser pulse trains by irradiating up to 10 pulses at 500 kHz pulse repetition frequency to the substrate. For increasing pulse numbers, the shadowgraphs show a steady increase in height and width of the laser plasma/ablation plume that were measured at 2.4 mm in height and 1.2 mm in width after the 10th pulse.

Global phylogeography and genetic diversity of the long-finned pilot whale Globicephala melas, with new data from the southeastern Pacific.

The matrilineal long-finned pilot whale presents an antitropical distribution and is divided into two subspecies, one in the temperate seas of the Southern Hemisphere and the other restricted to the North Atlantic and Mediterranean. Until now, population genetic and phylogeographic studies have included localities of most of its Northern Hemisphere distribution, while only the southwestern Pacific has been sampled in the Southern Hemisphere. We add new genetic data from the southeastern Pacific to the published sequences. Low mitochondrial and nuclear diversity was encountered in this new area, as previously reported for other localities. Four haplotypes were found with only one new for the species. Fifteen haplotypes were detected in the global dataset, underlining the species' low diversity. As previously reported, the subspecies shared two haplotypes and presented a strong phylogeographic structure. The extant distribution of this species has been related to dispersal events during the Last Glacial Maximum. Using the genetic data and Approximate Bayesian Calculations, this study supports this historical biogeographic scenario. From a taxonomic perspective, even if genetic analyses do not support the subspecies category, this study endorses the incipient divergence process between hemispheres, thus maintaining their status and addressing them as Demographically Independent Populations is recommended.

Bose-Einstein condensation of alkaline earth atoms: ;{40}Ca.

We have achieved Bose-Einstein condensation of ;{40}Ca, the first for an alkaline earth element. The influence of elastic and inelastic collisions associated with the large ground-state s-wave scattering length of ;{40}Ca was measured. From these findings, an optimized loading and cooling scheme was developed that allowed us to condense about 2 x 10;{4} atoms after laser cooling in a two-stage magneto-optical trap and subsequent forced evaporation in a crossed dipole trap within less than 3 s. The condensation of an alkaline earth element opens novel opportunities for precision measurements on the narrow intercombination lines as well as investigations of molecular states at the ;{1}S-;{3}P asymptotes.