The effects of length and width of the stem on proximal humerus stress shielding in uncemented primary reverse total shoulder arthroplasty.

INTRODUCTION: To preserve humeral bone during RTSA, stems have been made shorter and cement avoided whenever possible. However, with the increased use of uncemented RTSA, a phenomenon comparable to the stress shielding of the hip has been described for the proximal humerus. The aim of this study was to investigate the influence of stem length and width on proximal humeral bone resorption after primary uncemented RTSA. MATERIALS AND METHODS: The prospective shoulder arthroplasty database of our institution was reviewed for all primary uncemented RTSAs from 2017 to 2020 in osteoarthritis and cuff tear arthropathy cases with > 2-year follow-up. We compared the clinical and the radiographic 2-year outcome of the short and standard length stems of the same prosthesis design. This allowed us to assess the effects of stem length and width with regard to stress shielding. Furthermore, we defined a cut-off value for the filling ratios to prevent stress shielding. RESULTS: Fifty patients were included in the analysis, nineteen were in the short stem group (SHORT) and thirty-one in the standard stem group (STANDARD). After 2 years, SHORT showed a relative Constant Score of 91.8% and STANDARD of 98.3% (p = 0.256). Stress shielding was found in 4 patients (21%) in SHORT and in 16 patients (52%) in STANDARD (p = 0.03); it occurred more frequently in patients with higher humeral filling ratios (p < 0.05). The calculated cut-off to prevent stress shielding was 0.7 (± 0.03) for the metaphyseal and distal filling ratio. CONCLUSION: While short and standard stems for RTSA have good results after 2 years, we found a significant negative effect of higher length and width of the stem with regard to stress shielding. Even though the clinical effects of stress shielding have to be assessed, short stems should be chosen with a filling ratio at the metaphyseal and distal position below 0.7. LEVEL OF EVIDENCE (A RETROSPECTIVE CASE-CONTROL STUDY): III.

Blunt rupture of the biceps brachii muscle - The "parachute injury" in a wake surfer - A case report.

Case: A 40-year-old man fell while wake surfing and his left arm got tangled in the rope. This caused a closed complete rupture of the M. biceps brachii. A primary muscle suture led to unrestricted function and excellent patient satisfaction after two years. Conclusions: The mentioned muscle rupture is a rare injury mainly described for paratroopers. As it has also been described for wakeboarding, this is the first description in wake surfing. Whereas in wakeboarding mainly experts are at risk during jumps, in wake surfing beginners are in danger and must be advised accordingly. Generally, the muscle suture leads to excellent function in these patients.

Iterative Metal Artifact Reduction in Head and Neck CT Facilitates Tumor Visualization of Oral and Oropharyngeal Cancer Obscured by Artifacts From Dental Hardware.

RATIONALE AND OBJECTIVES: The purpose of this study was to evaluate the diagnostic utility of iterative metal artifact reduction (iMAR) in computed tomography (CT)-imaging of oral and oropharyngeal cancers when obscured by dental hardware artifacts and to determine the most appropriate iMAR settings for this purpose. MATERIALS AND METHODS: The study retrospectively enrolled 27 patients (8 female, 19 male; mean age 64±12.7years) with histologically confirmed oral or oropharyngeal cancer obscured by dental artifacts in contrast-enhanced CT. Raw CT data were reconstructed with ascending iMAR strengths (levels 1/2/3/4/5) and one reconstruction without iMAR (level 0). For subjective analysis, two blinded radiologists rated tumor visualization and artifact severity on a five-point Likert scale. For objective analysis, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and artifact index (AI) were determined. RESULTS: iMAR reconstructions improved the subjective image quality of tumor edge and contrast, and the objective parameters of tumor SNR and CNR, reaching their optimum at iMAR levels 4 and 5 (P<.001). AI decreased with iMAR reconstructions reaching its minimum at iMAR level 5 (P<.001). Tumor detection rates increased 2.4-fold with iMAR 5, 2.1-fold with iMAR 4, and 1.9-fold with iMAR 3 compared to reconstructions without iMAR. Disadvantages such as algorithm-induced artifacts increased significantly with higher iMAR strengths (P<.05), reaching a maximum with iMAR 5. CONCLUSION: iMAR significantly improves CT imaging of oral and oropharyngeal cancers, as confirmed by both subjective and objective measures, with best results at highest iMAR strengths.

Cemented vs. uncemented reverse total shoulder arthroplasty for the primary treatment of proximal humerus fractures in the elderly-a retrospective case-control study.

BACKGROUND: Uncemented reverse total shoulder arthroplasty (RTSA) for the primary treatment of proximal humerus fractures (PHF) in elderly patients was introduced at our institution in 2017. Recent reports have raised concerns about increased rates of early bone resorption at the proximal humerus with uncemented fracture stems. The aim of this study was to find out whether there was any difference in functional or radiographic outcomes between cemented and uncemented RTSA for PHF. METHODS: Seventeen consecutive patients who underwent uncemented RTSA (group nC) in 2017 and 2018 were age and sex matched (propensity score matching 1:2) to 34 patients with cemented RTSA implanted between 2011 and 2016 (group C) for the primary treatment of PHF. These two groups were compared in terms of clinical and radiographic outcomes at 2 years after the index surgery. RESULTS: The mean bone quality was low in both groups: in group nC the deltoid tuberosity index (DTI) was 1.43 (1.22-1.72) and in group C 1.42 (1.22-1.67). At the final 2 year follow-up, the relative CS was 98.3% (71-118) in group nC and 97.9% (36-125) in group C (p = 0.927); the absolute CS was 70.2 (49-89) in group nC and 68.0 (30-94) in group C (p = 0.509). Lucent lines at the humeral site were seen in 8 cases (47%) in group nC and in 13 cases (38%) in group C (p = 0.056). Compared to 3% in group C, all patients in group nC showed at least grade 1 and 65% showed grade 3 bone resorption at the proximal humerus (p < 0.001). CONCLUSION: Compared to cemented RTSA bone resorption at the proximal humerus was significantly more frequent in patients with uncemented RTSA for PHF. So far, this is rather a radiographic than a clinical finding, because both groups showed very satisfying functional outcomes and low revision rates at the 2 year follow-up. LEVEL OF EVIDENCE III: A retrospective case-control study.

Cellular Aspects of Muscle Specialization Demonstrate Genotype - Phenotype Interaction Effects in Athletes.

INTRODUCTION: Gene polymorphisms are associated with athletic phenotypes relying on maximal or continued power production and affect the specialization of skeletal muscle composition with endurance or strength training of untrained subjects. We tested whether prominent polymorphisms in genes for angiotensin converting enzyme (ACE), tenascin-C (TNC), and actinin-3 (ACTN3) are associated with the differentiation of cellular hallmarks of muscle metabolism and contraction in high level athletes. METHODS: Muscle biopsies were collected from m. vastus lateralis of three distinct phenotypes; endurance athletes (n = 29), power athletes (n = 17), and untrained non-athletes (n = 63). Metabolism-, and contraction-related cellular parameters (such as capillary-to-fiber ratio, capillary length density, volume densities of mitochondria and intramyocellular lipid, fiber mean cross sectional area (MCSA) and volume densities of myofibrils) and the volume densities of sarcoplasma were analyzed by quantitative electron microscopy of the biopsies. Gene polymorphisms of ACE (I/D (insertion/deletion), rs1799752), TNC (A/T, rs2104772), and ACTN3 (C/T, rs1815739) were determined using high-resolution melting polymerase chain reaction (HRM-PCR). Genotype distribution was assessed using Chi2 tests. Genotype and phenotype effects were analyzed by univariate or multivariate analysis of variance and post hoc test of Fisher. P-values below 0.05 were considered statistically significant. RESULTS: The athletes demonstrated the specialization of metabolism- and contraction-related cellular parameters. Differences in cellular parameters could be identified for genotypes rs1799752 and rs2104772, and localized post hoc when taking the interaction with the phenotype into account. Between endurance and power athletes these concerned effects on capillary length density for rs1799752 and rs2104772, fiber type distribution and volume densities of myofibrils (rs1799752), and MSCA (rs2104772). Endurance athletes carrying the I-allele of rs1799752 demonstrated 50%-higher volume densities of mitochondria and sarcoplasma, when power athletes that carried only the D-allele showed the highest fiber MCSAs and a lower percentage of slow type muscle fibers. DISCUSSION: ACE and tenascin-C gene polymorphisms are associated with differences in cellular aspects of muscle metabolism and contraction in specifically-trained high level athletes. Quantitative differences in muscle fiber type distribution and composition, and capillarization in knee extensor muscle explain, in part, identified associations of the insertion/deletion genotypes of ACE (rs1799752) with endurance- and power-type Sports.

Pre-inflation from the multiverse: can it solve the quadrupole problem in the cosmic microwave background?

We analyze a quantized toy model of a universe undergoing eternal inflation using a quantum-field-theoretical formulation of the Wheeler-DeWitt equation. This so-called third quantization method leads to the picture that the eternally inflating universe is converted to a multiverse in which sub-universes are created and exhibit a distinctive phase in their evolution before reaching an asymptotic de Sitter phase. From the perspective of one of these sub-universes, we can thus analyze the pre-inflationary phase that arises naturally. Assuming that our observable universe is represented by one of those sub-universes, we calculate how this pre-inflationary phase influences the power spectrum of the cosmic microwave background (CMB) anisotropies and analyze whether it can explain the observed discrepancy of the power spectrum on large scales, i.e. the quadrupole issue in the CMB. While the answer to this question is negative in the specific model analyzed here, we point out a possible resolution of this issue.

Advanced Modeled Iterative Reconstruction (ADMIRE) Facilitates Radiation Dose Reduction in Abdominal CT.

RATIONALE AND OBJECTIVES: This study aimed to determine the potential degree of radiation dose reduction achievable using Advanced Modeled Iterative Reconstruction (ADMIRE) in abdominal computed tomography (CT) while maintaining image quality. Moreover, this study compared differences in image noise reduction of this iterative algorithm with radiation dose reduction. METHODS: Eleven consecutive patients scheduled for abdominal CT were scanned according to our institute's standard protocol (100 kV, 289 reference mAs). Using a proprietary reconstruction software, CT images of these patients were reconstructed as either full-dose weighted filtered back projections or with simulated radiation dose reductions down to 10% of the full-dose level and ADMIRE at either strength 3 or strength 5. Images were marked with arrows pointing on anatomic structures of the abdomen, differing in their contrast to the surrounding tissue. Structures were grouped into high-, medium-, and low-contrast subgroups. In addition, the intrinsic noise of these structures was measured. That followed, image pairs were presented to observers, with five readers assessing image quality using two-alternative-forced-choice comparisons. In total, 3000 comparisons were performed that way. RESULTS: Both ADMIRE 3 and 5 decreased noise of the anatomic structures significantly compared to the filtered back projection, with an additional significant difference between ADMIRE 3 and 5. Radiation dose reduction potential for ADMIRE ranged from 29.0% to 53.5%, with no significant differences between ADMIRE 3 and 5 within the contrast subgroups.The potential levels of radiation dose reduction for ADMIRE 3 differed significantly between high-, medium-, and low-contrast structures, whereas for ADMIRE 5, there was only a significant difference between the high- and the medium-contrast subgroups. CONCLUSION: Although ADMIRE 5 permits significantly higher noise reduction potential than ADMIRE 3, it does not facilitate higher levels of radiation dose reduction. ADMIRE nonetheless holds remarkable potential for radiation dose reduction, which features a certain dependency on the contrast of the structure of interest. Applying ADMIRE with a strength of 3 in abdominal CT may permit radiation dose reduction of about 30%.

Inter- and intra-operator reliability in patient-specific template positioning for total hip arthroplasty. A cadaver study.

BACKGROUND: The implantation of the acetabular cup essentially determines the clinical outcome of total hip arthroplasty. To address this issue, the aim of this study was to build patient-specific instruments (PSIs) with various reference surfaces, followed by in vitro investigations to examine the inter- and intra-operator reliability as well as the overall precision of these patient-specific templates. METHODS: Seven human hemi-pelvis specimens were used for this study. After a CT scan, PSIs with different imprint heights were created. The overall precision of the templates and the inter- and intra-operator reliabilities were calculated. RESULTS: Strong differences in precision between the PSI designs could be observed. The desired orientation of the acetabular cup could be adjusted with a precision of up to 1.55°. CONCLUSION: Based on our results, we believe that the application of the PSI-based acetabular cup positioning in total hip arthroplasty procedures can potentially increase the precision of cup placement.

What if? Exploring the multiverse through Euclidean wormholes.

We present Euclidean wormhole solutions describing possible bridges within the multiverse. The study is carried out in the framework of third quantisation. The matter content is modelled through a scalar field which supports the existence of a whole collection of universes. The instanton solutions describe Euclidean solutions that connect baby universes with asymptotically de Sitter universes. We compute the tunnelling probability of these processes. Considering the current bounds on the energy scale of inflation and assuming that all the baby universes are nucleated with the same probability, we draw some conclusions about which universes are more likely to tunnel and therefore undergo a standard inflationary era.

Design considerations for a novel shape-memory-plate osteosynthesis allowing for non-invasive alteration of bending stiffness.

Biomechanical stimuli play a major role in fracture healing. Changing the fixation stiffness through the course of healing might accelerate bone healing and prevent healing complications. Shape memory alloy (SMA) based implants were developed to allow for non-invasive stiffness alteration during the fracture healing process. To gain a deeper understanding of the implant functionality based on the alloy characteristics and geometric design, the mechanical properties of different shape memory alloys where mechanically characterized. SMA bone plates were manufactured and the structural bending stiffness of the implants was determined at different temperatures and configurations. The temperature required for complete recovery of shape after deformation increased continuously with increasing pseudo-plastic deformation in SMA probes. Full recovery was observed at temperatures ranging from 38°C to 52°C after pseudo-plastic deformations ranging from 0.2% to 1.0% outer fibre strain, respectively. The small fragment inverse-dynamisation implants revealed bending stiffnesses ranging from 0.09Nm2 to 0.34Nm2 in the initial state and from 0.16Nm2 to 0.46Nm2 after shape alteration. Dependent on the design, a relative gain of the implant stiffness ranging from 18.8% to 115.0% could be observed. The large inverse-dynamisation implants revealed bending stiffnesses from 3.7Nm2 to 7.1Nm2 before and 4.1Nm2 to 12.6Nm2 after triggering the shape memory effect. Dependent on the design a gain in stiffness from 11.8% to 117.2% was observed. Warming the SMA implant to 40°C for a short period of time, leads to a moderate increase in implant stiffness of up to 64.5%, while triggering the implant with 50°C leads to a maximum increase in stiffness of up to 127.3%. The Nitinol shape memory bone plates have a huge potential for improving the treatment of long shaft fractures by allowing for the increase, decrease or incremental change of implant stiffness in fracture stabilization. However, the interaction between design, material properties, and manufacturing processes need to be carefully considered for each specific application to achieve optimum function of SMA-based, stiffness altering, fracture-fixation implants.

Dose reduction potential of iterative reconstruction algorithms in neck CTA-a simulation study.

OBJECTIVES: This study aimed to determine the degree of radiation dose reduction in neck CT angiography (CTA) achievable with Sinogram-affirmed iterative reconstruction (SAFIRE) algorithms. METHODS: 10 consecutive patients scheduled for neck CTA were included in this study. CTA images of the external carotid arteries either were reconstructed with filtered back projection (FBP) at full radiation dose level or underwent simulated dose reduction by proprietary reconstruction software. The dose-reduced images were reconstructed using either SAFIRE 3 or SAFIRE 5 and compared with full-dose FBP images in terms of vessel definition. 5 observers performed a total of 3000 pairwise comparisons. RESULTS: SAFIRE allowed substantial radiation dose reductions in neck CTA while maintaining vessel definition. The possible levels of radiation dose reduction ranged from approximately 34 to approximately 90% and depended on the SAFIRE algorithm strength and the size of the vessel of interest. In general, larger vessels permitted higher degrees of radiation dose reduction, especially with higher SAFIRE strength levels. With small vessels, the superiority of SAFIRE 5 over SAFIRE 3 was lost. CONCLUSIONS: Neck CTA can be performed with substantially less radiation dose when SAFIRE is applied. The exact degree of radiation dose reduction should be adapted to the clinical question, in particular to the smallest vessel needing excellent definition.

Implant impingement during internal rotation after reverse shoulder arthroplasty. The effect of implant configuration and scapula anatomy: A biomechanical study.

BACKGROUND: Internal rotation after reverse shoulder arthroplasty is essential to perform fundamental daily living activities. The purpose of this study was to examine the impact of anatomical and implant related factors on impingement-free internal rotation of the glenohumeral joint. METHODS: CT-scans of 13 human shoulder specimens with implanted reverse shoulder prostheses were carried out and scapula neck length, lateral pillar angle, and implantation height of the metaglene were measured. Internal rotation testing of all specimens was performed by the use of a robot assisted shoulder simulator. Biomechanical variables were analyzed using a three-way ANOVA. Spearman's rank correlations were performed to determine the relationship between biomechanical and anatomical data. FINDINGS: The maximum internal rotation angle for a 38 mm centric glenosphere and a standard onlay was 93.4(SD 34.9°). The change of the diameter of the glenosphere resulted in no significant increase of the maximum rotation angle (P=0.16), while change of the glenosphere type from concentric to eccentric (P=0.005) as well as the change of the onlay type from standard to a more shallow one (P=0.002) both had a significant effect on the internal rotation. The distance between the inferior rim of the metaglene and the inferior aspect of the glenoid (P=0.21), scapula pillar angle (P=0.13) as well as the scapula neck length (P=0.81) showed no significant correlation with the maximum internal rotation angle. INTERPRETATION: Implant component selection shows strong influence on the impingement-free internal rotation. The use of an eccentric glenosphere and a shallow humeral cup may improve internal rotation after reverse shoulder arthroplasty.

A Novel Pairwise Comparison-Based Method to Determine Radiation Dose Reduction Potentials of Iterative Reconstruction Algorithms, Exemplified Through Circle of Willis Computed Tomography Angiography.

OBJECTIVES: The aim of this study was to determine the dose reduction potential of iterative reconstruction (IR) algorithms in computed tomography angiography (CTA) of the circle of Willis using a novel method of evaluating the quality of radiation dose-reduced images. MATERIALS AND METHODS: This study relied on ReconCT, a proprietary reconstruction software that allows simulating CT scans acquired with reduced radiation dose based on the raw data of true scans. To evaluate the performance of ReconCT in this regard, a phantom study was performed to compare the image noise of true and simulated scans within simulated vessels of a head phantom. That followed, 10 patients scheduled for CTA of the circle of Willis were scanned according to our institute's standard protocol (100 kV, 145 reference mAs). Subsequently, CTA images of these patients were reconstructed as either a full-dose weighted filtered back projection or with radiation dose reductions down to 10% of the full-dose level and Sinogram-Affirmed Iterative Reconstruction (SAFIRE) with either strength 3 or 5. Images were marked with arrows pointing on vessels of different sizes, and image pairs were presented to observers. Five readers assessed image quality with 2-alternative forced choice comparisons. RESULTS: In the phantom study, no significant differences were observed between the noise levels of simulated and true scans in filtered back projection, SAFIRE 3, and SAFIRE 5 reconstructions.The dose reduction potential for patient scans showed a strong dependence on IR strength as well as on the size of the vessel of interest. Thus, the potential radiation dose reductions ranged from 84.4% for the evaluation of great vessels reconstructed with SAFIRE 5 to 40.9% for the evaluation of small vessels reconstructed with SAFIRE 3. CONCLUSIONS: This study provides a novel image quality evaluation method based on 2-alternative forced choice comparisons. In CTA of the circle of Willis, higher IR strengths and greater vessel sizes allowed higher degrees of radiation dose reduction.

Corrosion behavior, biocompatibility and biomechanical stability of a prototype magnesium-based biodegradable intramedullary nailing system.

Implants made of degradable magnesium alloys are a potential alternative to conventional orthopaedic implant materials, e.g. stainless steel or titanium. Intramedullary nails made of the magnesium alloy LAE442 were subjected to cyclic fatigue tests in both distilled water and Hank's Balanced Salt Solution (HBSS) at 37.5°C until implant failure or a limit of 500,000cycles was reached. In distilled water, four of the five nails were still intact after the end of the biomechanical test. In HBSS, a breakage within the first 70,000 bending cycles was observed. Additionally, the degradation rate of this alloy was determined in HBSS according to the weight loss method (0.24±0.12mmyear(-1)) and based on gas release (0.21±0.03mmyear(-1)) with a standard eudiometer. A cytotoxicity test with L929 cells was carried out in accordance with EN ISO 10993-5/12. This test demonstrated sufficient cell viability of the diluted extracts (50%, 25% and 12.5%). The relative metabolic activity of the 100% extract was reduced slightly below 70%, which is classified as a threshold value for cytotoxicity. In conclusion, this in vitro study indicates that intramedullary nails made of LAE442 may not have the required fatigue resistance for load-bearing applications and the development of a corrosion-protective coating may be necessary to prevent early failure of the implant.

Biomechanical evaluation of inferior scapula notching of reverse shoulder arthroplasty depending on implant configuration and scapula neck anatomy.

PURPOSE: The presence of inferior scapula notching is significantly affected by the anatomy the scapula and can be influenced by the glenosphere design and position and the onlay type. MATERIALS AND METHODS: A biomechanical study was undertaken with 13 human shoulder specimens in a robot-assisted shoulder simulator. Inferior scapula contact during adduction of the humerus was detected using a contact pressure film. Computed tomography scans with three-dimensional reconstructions of each specimen were performed. RESULTS: The greatest improvement of the scapula notching angle (SNA) was achieved by simultaneous implantation of a shallow humeral onlay and an eccentric glenosphere design: 16.3-19.0° (P < 0.005). The SNA was significantly decreased by 5.8° when shifting from a 38 mm centric glenosphere to a 42 mm centric glenosphere (P < 0.005) and by 8.9° comparing the 38 mm centric glenosphere with 38 mm eccentric glenosphere (P < 0.005). The solitary implantation of a shallow onlay significantly decreased the SNA depending on the glenosphere size between 7.4° and 8.0° (P = 0.001). A more inferior position of the metaglene as well as a long scapula neck (P = 0.029) and a large lateral scapula pillar angle (P = 0.033) were correlated with a lower SNA. CONCLUSION: This study demonstrates the importance of inferior glenosphere placement and the benefit of eccentric glenosphere and shallow humeral cup design to reduce the adduction deficit of the reverse shoulder. The presence of a short neck of the scapula can have a negative prognostic effect on inferior impingement during adduction of the arm. LEVEL OF EVIDENCE: Basic Science Study.

A nickel-titanium shape memory alloy plate for contactless inverse dynamization after internal fixation in a sheep tibia fracture model: A pilot study.

BACKGROUND: Inverse dynamization has recently been proposed for the treatment of tibia non-unions. Nickel-titanium (NiTi) shape memory alloys (SMAs) may provide an opportunity for contactless non-invasive alteration of the stiffness of an implant after surgery. OBJECTIVE: The aim of this pilot study was to analyze the feasibility of the one way shape memory effect in a large animal as well as the feasibility of our ovine large animal fracture model. METHODS: A tibia osteotomy was performed in three sheep, followed by NiTi plate osteosynthesis in two cases and standard locking compression plate (LCP) osteosynthesis in one sheep. Contactless induction heating was performed after 3 weeks in order to alter the stiffness of the NiTi plates. Euthanasia was followed by biomechanical analysis after 8 weeks. RESULTS: Successful change of configuration through contactless induction heating was shown in both SMA plates by image intensifier control. Although large differences in bending and torsional stiffness were observed between the operated and contralateral tibia, the sheep ambulated almost normally at six weeks post-operative. CONCLUSION: We were able to trigger the one way shape memory effect which non-invasively altered the stiffness of the plate osteosynthesis.

Diaphragm Repair with a Novel Cross-Linked Collagen Biomaterial in a Growing Rabbit Model.

BACKGROUND: Neonates with congenital diaphragmatic hernia and large defects often require patch closure. Acellular collagen matrices (ACM) have been suggested as an alternative to synthetic durable patches as they are remodeled by the host or could also be used for tissue engineering purposes. MATERIALS AND METHODS: 2.0x1.0 cm diaphragmatic defects were created in 6-weeks old New-Zealand white rabbits. We compared reconstruction with a purpose-designed cross-linked ACM (Matricel) to 4-layer non-cross-linked small intestinal submucosa (SIS) and a 1-layer synthetic Dual Mesh (Gore-Tex). Unoperated animals or animals undergoing primary closure (4/0 polyglecaprone) served as age-matched controls. 60 (n = 25) resp. 90 (n = 17) days later, animals underwent chest x-ray and obduction for gross examination of explants, scoring of adhesion and inflammatory response. Also, uniaxial tensiometry was done, comparing explants to contralateral native diaphragmatic tissue. RESULTS: Overall weight nearly doubled from 1,554±242 g at surgery to 2,837±265 g at obduction (+84%). X-rays did show rare elevation of the left diaphragm (SIS = 1, Gore-Tex = 1, unoperated control = 1), but no herniation of abdominal organs. 56% of SIS and 10% of Matricel patches degraded with visceral bulging in four (SIS = 3, Matricel = 1). Adhesion scores were limited: 0.5 (Matricel) to 1 (SIS, Gore-Tex) to the left lung (p = 0.008) and 2.5 (Gore-Tex), 3 (SIS) and 4 (Matricel) to the liver (p<0.0001). Tensiometry revealed a reduced bursting strength but normal compliance for SIS. Compliance was reduced in Matricel and Gore-Tex (p<0.01). Inflammatory response was characterized by a more polymorphonuclear cell (SIS) resp. macrophage (Matricel) type of infiltrate (p<0.05). Fibrosis was similar for all groups, except there was less mature collagen deposited to Gore-Tex implants (p<0.05). CONCLUSIONS: Matricel induced a macrophage-dominated inflammatory response, more adhesions, had appropriate strength but a lesser compliance compared to native tissue. The herein investigated ACM is not a viable option for CDH repair.

Computed Tomography Angiography of Carotid Arteries and Vertebrobasilar System: A Simulation Study for Radiation Dose Reduction.

Computed tomography angiography (CTA) of carotid arteries and vertebrobasilar system is a standardized procedure with excellent image quality, but radiation exposure remains a matter of concern. The aim of this study is to examine to what extent radiation dose can be lowered in relation to a standard protocol by simulating examinations with lower tube currents applying a dedicated software.Lower tube current was simulated by a dedicated noise insertion and reconstruction software (ReconCT). In a phantom study, true scans were performed with different dose protocols and compared to the results of simulated dose reductions of the same degree, respectively. In a patient study, 30 CTAs of supra-aortic vessels were reconstructed at a level of 100%, 75%, 50%, and 25% of the initial dose. Objective and subjective image analyses were performed.No significant noise differences between true scans and simulated scans of mimicked contrasted vessels were found. In the patient study, the quality scores of the 4 dose groups differed statistically significant; this difference vanished for the comparison of the 100% and 75% datasets after dichotomization into the categories of diagnostic and nondiagnostic image quality (P = .50).This study suggests an easy-to-implement method of simulating CTAs of carotid arteries and vertebrobasilar system with lower tube current for dose reduction by artificially adding noise to the original raw data. Lowering the radiation dose in a moderate extent to 75% of the original dose levels does not significantly alter the diagnostic image quality.

A Novel Shape Memory Plate Osteosynthesis for Noninvasive Modulation of Fixation Stiffness in a Rabbit Tibia Osteotomy Model.

UNLABELLED: Nickel-titanium shape memory alloy (NiTi-SMA) implants might allow modulating fracture healing, changing their stiffness through alteration of both elastic modulus and cross-sectional shape by employing the shape memory effect (SME). HYPOTHESES: a novel NiTi-SMA plate stabilizes tibia osteotomies in rabbits. After noninvasive electromagnetic induction heating the alloy exhibits the SME and the plate changes towards higher stiffness (inverse dynamization) resulting in increased fixation stiffness and equal or better bony healing. In 14 rabbits, 1.0 mm tibia osteotomies were fixed with our experimental plate. Animals were randomised for control or induction heating at three weeks postoperatively. Repetitive X-ray imaging and in vivo measurements of bending stiffness were performed. After sacrifice at 8 weeks, macroscopic evaluation, µCT, and post mortem bending tests of the tibiae were carried out. One death and one early implant dislocation occurred. Following electromagnetic induction heating, radiographic and macroscopic changes of the implant proved successful SME activation. All osteotomies healed. In the treatment group, bending stiffness increased over time. Differences between groups were not significant. In conclusion, we demonstrated successful healing of rabbit tibia osteotomies using our novel NiTi-SMA plate. We demonstrated shape-changing SME in-vivo through transcutaneous electromagnetic induction heating. Thus, future orthopaedic implants could be modified without additional surgery.

Automated tube voltage adaptation in head and neck computed tomography between 120 and 100 kV: effects on image quality and radiation dose.

INTRODUCTION: Low tube voltage allows for computed tomography (CT) imaging with increased iodine contrast at reduced radiation dose. We sought to evaluate the image quality and potential dose reduction using a combination of attenuation based tube current modulation (TCM) and automated tube voltage adaptation (TVA) between 100 and 120 kV in CT of the head and neck. METHODS: One hundred thirty consecutive patients with indication for head and neck CT were examined with a 128-slice system capable of TCM and TVA. Reference protocol was set at 120 kV. Tube voltage was reduced to 100 kV whenever proposed by automated analysis of the localizer. An additional small scan aligned to the jaw was performed at a fixed 120 kV setting. Image quality was assessed by two radiologists on a standardized Likert-scale and measurements of signal- (SNR) and contrast-to-noise ratio (CNR). Radiation dose was assessed as CTDIvol. RESULTS: Diagnostic image quality was excellent in both groups and did not differ significantly (p = 0.34). Image noise in the 100 kV data was increased and SNR decreased (17.8/9.6) in the jugular veins and the sternocleidomastoid muscle when compared to 120 kV (SNR 24.4/10.3), but not in fatty tissue and air. However, CNR did not differ statistically significant between 100 (23.5/14.4/9.4) and 120 kV data (24.2/15.3/8.6) while radiation dose was decreased by 7-8%. CONCLUSIONS: TVA between 100 and 120 kV in combination with TCM led to a radiation dose reduction compared to TCM alone, while keeping CNR constant though maintaining diagnostic image quality.