Genetic Variance Estimation over Time in Broiler Breeding Programmes for Growth and Reproductive Traits.

Monitoring the genetic variance of traits is a key priority to ensure the sustainability of breeding programmes in populations under directional selection, since directional selection can decrease genetic variation over time. Studies monitoring changes in genetic variation have typically used long-term data from small experimental populations selected for a handful of traits. Here, we used a large dataset from a commercial breeding line spread over a period of twenty-three years. A total of 2,059,869 records and 2,062,112 animals in the pedigree were used for the estimations of variance components for the traits: body weight (BWT; 2,059,869 records) and hen-housed egg production (HHP; 45,939 records). Data were analysed with three estimation approaches: sliding overlapping windows, under frequentist (restricted maximum likelihood (REML)) and Bayesian (Gibbs sampling) methods; expected variances using coefficients of the full relationship matrix; and a "double trait covariances" analysis by computing correlations and covariances between the same trait in two distinct consecutive windows. The genetic variance showed marginal fluctuations in its estimation over time. Whereas genetic, maternal permanent environmental, and residual variances were similar for BWT in both the REML and Gibbs methods, variance components when using the Gibbs method for HHP were smaller than the variances estimated when using REML. Large data amounts were needed to estimate variance components and detect their changes. For Gibbs (REML), the changes in genetic variance from 1999-2001 to 2020-2022 were 82.29 to 93.75 (82.84 to 93.68) for BWT and 76.68 to 95.67 (98.42 to 109.04) for HHP. Heritability presented a similar pattern as the genetic variance estimation, changing from 0.32 to 0.36 (0.32 to 0.36) for BWT and 0.16 to 0.15 (0.21 to 0.18) for HHP. On the whole, genetic parameters tended slightly to increase over time. The expected variance estimates were lower than the estimates when using overlapping windows. That indicates the low effect of the drift-selection process on the genetic variance, or likely, the presence of genetic variation sources compensating for the loss. Double trait covariance analysis confirmed the maintenance of variances over time, presenting genetic correlations >0.86 for BWT and >0.82 for HHP. Monitoring genetic variance in broiler breeding programmes is important to sustain genetic progress. Although the genetic variances of both traits fluctuated over time, in some windows, particularly between 2003 and 2020, increasing trends were observed, which warrants further research on the impact of other factors, such as novel mutations, operating on the dynamics of genetic variance.

Evolutions in Commercial Meat Poultry Breeding.

This paper provides a comprehensive overview of the history of commercial poultry breeding, from domestication to the development of science and commercial breeding structures. The development of breeding goals over time, from mainly focusing on production to broad goals, including bird welfare and health, robustness, environmental impact, biological efficiency and reproduction, is detailed. The paper outlines current breeding goals, including traits (e.g., on foot and leg health, contact dermatitis, gait, cardiovascular health, robustness and livability), recording techniques, their genetic basis and how trait these antagonisms, for example, between welfare and production, are managed. Novel areas like genomic selection and gut health research and their current and potential impact on breeding are highlighted. The environmental impact differences of various genotypes are explained. A future outlook shows that balanced, holistic breeding will continue to enable affordable lean animal protein to feed the world, with a focus on the welfare of the birds and a diversity of choice for the various preferences and cultures across the world.

Predictive assessment of single-step BLUP with linear and non-linear similarity RKHS kernels: A case study in chickens.

Single-step GBLUP (ssGBLUP) to obtain genomic prediction was proposed in 2009. Many studies have investigated ssGBLUP in genomic selection in animals and plants using a standard linear kernel (similarity matrix) called genomic relationship matrix (G). More general kernels should allow capturing non-additive effects as well, whereas GBLUP is based on additive gene action. In this study, we generalized ssBLUP to accommodate two non-linear kernels, the averaged Gaussian kernel (AK) and the recently developed arc-cosine deep kernel (DK). We evaluated the methodology using body weight (BW) and hen-housing production (HHP) traits, recorded on a sample of phenotyped and genotyped commercial broiler chickens. There were, thus, different ssGBLUP models corresponding to G, AK and DK. We used random replication of training (TRN) and testing (TST) layouts at different genotyping rates (20%, 40%, 60% and 80% of all birds) in three selective genotyping scenarios. The selections were genotyping the youngest individuals in the pedigree (YS), random genotyping (RS) and genotyping based on parent average (PA). Predictive abilities were measured using rank correlations between the observed and the predictive phenotypic values in TST for each random partition. Prediction accuracy was influenced by the type of kernel when a large proportion of birds was genotyped. An advantage of non-linear kernels (AK and DK) was more apparent when 60 and 80% of birds had been genotyped. For BW, the lowest rank correlations were obtained with G (0.093 ± 0.015 using RS by 20% genotyped individuals) and the highest values with DK (0.320 ± 0.016 in the PA setting with 80% genotyped individuals). For HHP, the lowest and highest rank correlations were obtained by AK with 20% and 80% genotyped individuals, 0.071 ± 0.016 (in RS) and 0.23 ± 0.016 (in PA) respectively. Our results indicated that AK and DK are more effective than G when a large proportion of the target population is genotyped. Our expectation is that ssGBLUP with AK or DK models can perform even better than G when non-additive genetic effects influence the underlying variability of complex traits.

A genome-wide association analysis for body weight at 35 days measured on 137,343 broiler chickens.

BACKGROUND: Body weight (BW) is an economically important trait in the broiler (meat-type chickens) industry. Under the assumption of polygenicity, a "large" number of genes with "small" effects is expected to control BW. To detect such effects, a large sample size is required in genome-wide association studies (GWAS). Our objective was to conduct a GWAS for BW measured at 35 days of age with a large sample size. METHODS: The GWAS included 137,343 broilers spanning 15 pedigree generations and 392,295 imputed single nucleotide polymorphisms (SNPs). A false discovery rate of 1% was adopted to account for multiple testing when declaring significant SNPs. A Bayesian ridge regression model was implemented, using AlphaBayes, to estimate the contribution to the total genetic variance of each region harbouring significant SNPs (1 Mb up/downstream) and the combined regions harbouring non-significant SNPs. RESULTS: GWAS revealed 25 genomic regions harbouring 96 significant SNPs on 13 Gallus gallus autosomes (GGA1 to 4, 8, 10 to 15, 19 and 27), with the strongest associations on GGA4 at 65.67-66.31 Mb (Galgal4 assembly). The association of these regions points to several strong candidate genes including: (i) growth factors (GGA1, 4, 8, 13 and 14); (ii) leptin receptor overlapping transcript (LEPROT)/leptin receptor (LEPR) locus (GGA8), and the STAT3/STAT5B locus (GGA27), in connection with the JAK/STAT signalling pathway; (iii) T-box gene (TBX3/TBX5) on GGA15 and CHST11 (GGA1), which are both related to heart/skeleton development); and (iv) PLAG1 (GGA2). Combined together, these 25 genomic regions explained ~ 30% of the total genetic variance. The region harbouring significant SNPs that explained the largest portion of the total genetic variance (4.37%) was on GGA4 (~ 65.67-66.31 Mb). CONCLUSIONS: To the best of our knowledge, this is the largest GWAS that has been conducted for BW in chicken to date. In spite of the identified regions, which showed a strong association with BW, the high proportion of genetic variance attributed to regions harbouring non-significant SNPs supports the hypothesis that the genetic architecture of BW35 is polygenic and complex. Our results also suggest that a large sample size will be required for future GWAS of BW35.

Detection of loci exhibiting pleiotropic effects on body weight and egg number in female broilers.

The objective of the present study was to discover the genetic variants, functional candidate genes, biological processes and molecular functions underlying the negative genetic correlation observed between body weight (BW) and egg number (EN) traits in female broilers. To this end, first a bivariate genome-wide association and second stepwise conditional-joint analyses were performed using 2586 female broilers and 240 k autosomal SNPs. The aforementioned analyses resulted in a total number of 49 independent cross-phenotype (CP) significant SNPs with 35 independent markers showing antagonistic action i.e., positive effects on one trait and negative effects on the other trait. A number of 33 independent CP SNPs were located within 26 and 14 protein coding and long non-coding RNA genes, respectively. Furthermore, 26 independent markers were situated within 44 reported QTLs, most of them related to growth traits. Investigation of the functional role of protein coding genes via pathway and gene ontology analyses highlighted four candidates (CPEB3, ACVR1, MAST2 and CACNA1H) as most plausible pleiotropic genes for the traits under study. Three candidates (CPEB3, MAST2 and CACNA1H) were associated with antagonistic pleiotropy, while ACVR1 with synergistic pleiotropic action. Current results provide a novel insight into the biological mechanism of the genetic trade-off between growth and reproduction, in broilers.

Quantitative trait loci and transcriptome signatures associated with avian heritable resistance to Campylobacter.

Campylobacter is the leading cause of bacterial foodborne gastroenteritis worldwide. Handling or consumption of contaminated poultry meat is a key risk factor for human campylobacteriosis. One potential control strategy is to select poultry with increased resistance to Campylobacter. We associated high-density genome-wide genotypes (600K single nucleotide polymorphisms) of 3000 commercial broilers with Campylobacter load in their caeca. Trait heritability was modest but significant (h2 = 0.11 ± 0.03). Results confirmed quantitative trait loci (QTL) on chromosomes 14 and 16 previously identified in inbred chicken lines, and detected two additional QTLs on chromosomes 19 and 26. RNA-Seq analysis of broilers at the extremes of colonisation phenotype identified differentially transcribed genes within the QTL on chromosome 16 and proximal to the major histocompatibility complex (MHC) locus. We identified strong cis-QTLs located within MHC suggesting the presence of cis-acting variation in MHC class I and II and BG genes. Pathway and network analyses implicated cooperative functional pathways and networks in colonisation, including those related to antigen presentation, innate and adaptive immune responses, calcium, and renin-angiotensin signalling. While co-selection for enhanced resistance and other breeding goals is feasible, the frequency of resistance-associated alleles was high in the population studied and non-genetic factors significantly influenced Campylobacter colonisation.

Deciphering the mode of action and position of genetic variants impacting on egg number in broiler breeders.

BACKGROUND: Aim of the present study was first to identify genetic variants associated with egg number (EN) in female broilers, second to describe the mode of their gene action (additive and/or dominant) and third to provide a list with implicated candidate genes for the trait. A number of 2586 female broilers genotyped with the high density (~ 600 k) SNP array and with records on EN (mean = 132.4 eggs, SD = 29.8 eggs) were used. Data were analyzed with application of additive and dominant multi-locus mixed models. RESULTS: A number of 7 additive, 4 dominant and 6 additive plus dominant marker-trait significant associations were detected. A total number of 57 positional candidate genes were detected within 50 kb downstream and upstream flanking regions of the 17 significant markers. Functional enrichment analysis pinpointed two genes (BHLHE40 and CRTC1) to be involved in the 'entrainment of circadian clock by photoperiod' biological process. Gene prioritization analysis of the positional candidate genes identified 10 top ranked genes (GDF15, BHLHE40, JUND, GDF3, COMP, ITPR1, ELF3, ELL, CRLF1 and IFI30). Seven prioritized genes (GDF15, BHLHE40, JUND, GDF3, COMP, ELF3, CRTC1) have documented functional relevance to reproduction, while two more prioritized genes (ITPR1 and ELL) are reported to be related to egg quality in chickens. CONCLUSIONS: Present results have shown that detailed exploration of phenotype-marker associations can disclose the mode of action of genetic variants and help in identifying causative genes associated with reproductive traits in the species.

Discovery and characterization of functional modules associated with body weight in broilers.

Aim of the present study was to investigate whether body weight (BW) in broilers is associated with functional modular genes. To this end, first a GWAS for BW was conducted using 6,598 broilers and the high density SNP array. The next step was to search for positional candidate genes and QTLs within strong LD genomic regions around the significant SNPs. Using all positional candidate genes, a network was then constructed and community structure analysis was performed. Finally, functional enrichment analysis was applied to infer the functional relevance of modular genes. A total number of 645 positional candidate genes were identified in strong LD genomic regions around 11 genome-wide significant markers. 428 of the positional candidate genes were located within growth related QTLs. Community structure analysis detected 5 modules while functional enrichment analysis showed that 52 modular genes participated in developmental processes such as skeletal system development. An additional number of 14 modular genes (GABRG1, NGF, APOBEC2, STAT5B, STAT3, SMAD4, MED1, CACNB1, SLAIN2, LEMD2, ZC3H18, TMEM132D, FRYL and SGCB) were also identified as related to body weight. Taken together, current results suggested a total number of 66 genes as most plausible functional candidates for the trait examined.

Including Phenotypic Causal Networks in Genome-Wide Association Studies Using Mixed Effects Structural Equation Models.

Network based statistical models accounting for putative causal relationships among multiple phenotypes can be used to infer single-nucleotide polymorphism (SNP) effect which transmitting through a given causal path in genome-wide association studies (GWAS). In GWAS with multiple phenotypes, reconstructing underlying causal structures among traits and SNPs using a single statistical framework is essential for understanding the entirety of genotype-phenotype maps. A structural equation model (SEM) can be used for such purposes. We applied SEM to GWAS (SEM-GWAS) in chickens, taking into account putative causal relationships among breast meat (BM), body weight (BW), hen-house production (HHP), and SNPs. We assessed the performance of SEM-GWAS by comparing the model results with those obtained from traditional multi-trait association analyses (MTM-GWAS). Three different putative causal path diagrams were inferred from highest posterior density (HPD) intervals of 0.75, 0.85, and 0.95 using the inductive causation algorithm. A positive path coefficient was estimated for BM → BW, and negative values were obtained for BM → HHP and BW → HHP in all implemented scenarios. Further, the application of SEM-GWAS enabled the decomposition of SNP effects into direct, indirect, and total effects, identifying whether a SNP effect is acting directly or indirectly on a given trait. In contrast, MTM-GWAS only captured overall genetic effects on traits, which is equivalent to combining the direct and indirect SNP effects from SEM-GWAS. Although MTM-GWAS and SEM-GWAS use the similar probabilistic models, we provide evidence that SEM-GWAS captures complex relationships in terms of causal meaning and mediation and delivers a more comprehensive understanding of SNP effects compared to MTM-GWAS. Our results showed that SEM-GWAS provides important insight regarding the mechanism by which identified SNPs control traits by partitioning them into direct, indirect, and total SNP effects.

Predictive ability of genome-assisted statistical models under various forms of gene action.

Recent work has suggested that the performance of prediction models for complex traits may depend on the architecture of the target traits. Here we compared several prediction models with respect to their ability of predicting phenotypes under various statistical architectures of gene action: (1) purely additive, (2) additive and dominance, (3) additive, dominance, and two-locus epistasis, and (4) purely epistatic settings. Simulation and a real chicken dataset were used. Fourteen prediction models were compared: BayesA, BayesB, BayesC, Bayesian LASSO, Bayesian ridge regression, elastic net, genomic best linear unbiased prediction, a Gaussian process, LASSO, random forests, reproducing kernel Hilbert spaces regression, ridge regression (best linear unbiased prediction), relevance vector machines, and support vector machines. When the trait was under additive gene action, the parametric prediction models outperformed non-parametric ones. Conversely, when the trait was under epistatic gene action, the non-parametric prediction models provided more accurate predictions. Thus, prediction models must be selected according to the most probably underlying architecture of traits. In the chicken dataset examined, most models had similar prediction performance. Our results corroborate the view that there is no universally best prediction models, and that the development of robust prediction models is an important research objective.

Colonization of a commercial broiler line by Campylobacter is under limited genetic control and does not significantly impair performance or intestinal health.

Campylobacter is the leading bacterial cause of foodborne diarrheal illness in humans and source attribution studies unequivocally identify handling or consumption of poultry meat as a key risk factor. Campylobacter colonizes the avian intestines in high numbers and rapidly spreads within flocks. A need therefore exists to devise strategies to reduce Campylobacter populations in poultry flocks. There has been a great deal of research aiming to understand the epidemiology and transmission characteristics of Campylobacter in poultry as a means to reduce carriage rates in poultry and reduce infection in humans. One potential strategy for control is the genetic selection of poultry for increased resistance to colonization by Campylobacter. The potential for genetic control of colonization has been demonstrated in inbred populations following experimental challenge with Campylobacter where quantitative trait loci associated with resistance have been identified. Currently in the literature there is no information of the genetic basis of Campylobacter colonization in commercial broiler lines and it is unknown whether these QTL are found in commercial broiler lines. The aim of this study was to estimate genetic parameters associated with Campylobacter load and genetic correlations with gut health and production traits following natural exposure of broiler chickens to Campylobacter.The results from the analysis show a low but significant heritability estimate (0.095 ± 0.037) for Campylobacter load which indicates a limited genetic basis and that non-genetic factors have a greater influence on the level of Campylobacter found in the broiler chicken.Furthermore, through examination of macroscopic intestinal health and absorptive capacity, our study indicated that Campylobacter has no detrimental effects on intestinal health and bird growth following natural exposure in the broiler line under study. These data indicate that whilst there is a genetic component to Campylobacter colonization worthy of further investigation, there is a large proportion of phenotypic variance under the influence of non-genetic effects. As such the control of Campylobacter will require understanding and manipulation of non-genetic host and environmental factors.

Use and optimization of different sources of information for genomic prediction.

BACKGROUND: Molecular data is now commonly used to predict breeding values (BV). Various methods to calculate genomic relationship matrices (GRM) have been developed, with some studies proposing regression of coefficients back to the reference matrix of pedigree-based relationship coefficients (A). The objective was to compare the utility of two GRM: a matrix based on linkage analysis (LA) and anchored to the pedigree, i.e. [Formula: see text] and a matrix based on linkage disequilibrium (LD), i.e. [Formula: see text], using genomic and phenotypic data collected on 5416 broiler chickens. Furthermore, the effects of regressing the coefficients of [Formula: see text] back to A (LDA) and to [Formula: see text] (LDLA) were evaluated, using a range of weighting factors. The performance of the matrices and their composite products was assessed by the fit of the models to the data, and the empirical accuracy and bias of the BV that they predicted. The sensitivity to marker choice was examined by using two chips of equal density but including different single nucleotide polymorphisms (SNPs). RESULTS: The likelihood of models using GRM and composite matrices exceeded the likelihood of models based on pedigree alone and was highest with intermediate weighting factors for both the LDA and LDLA approaches. For these data, empirical accuracies were not strongly affected by the weighting factors, although they were highest when different sources of information were combined. The optimum weighting factors depended on the type of matrices used, as well as on the choice of SNPs from which the GRM were constructed. Prediction bias was strongly affected by the chip used and less by the form of the GRM. CONCLUSIONS: Our findings provide an empirical comparison of the efficacy of pedigree and genomic predictions in broiler chickens and examine the effects of fitting GRM with coefficients regressed back to a reference anchored to the pedigree, either A or [Formula: see text]. For the analysed dataset, the best results were obtained when [Formula: see text] was combined with relationships in A or [Formula: see text], with optimum weighting factors that depended on the choice of SNPs used. The optimum weighting factor for broiler body weight differed from weighting factors that were based on the density of SNPs and theoretically derived using generalised assumptions.

A predictive assessment of genetic correlations between traits in chickens using markers.

BACKGROUND: Genomic selection has been successfully implemented in plant and animal breeding programs to shorten generation intervals and accelerate genetic progress per unit of time. In practice, genomic selection can be used to improve several correlated traits simultaneously via multiple-trait prediction, which exploits correlations between traits. However, few studies have explored multiple-trait genomic selection. Our aim was to infer genetic correlations between three traits measured in broiler chickens by exploring kinship matrices based on a linear combination of measures of pedigree and marker-based relatedness. A predictive assessment was used to gauge genetic correlations. METHODS: A multivariate genomic best linear unbiased prediction model was designed to combine information from pedigree and genome-wide markers in order to assess genetic correlations between three complex traits in chickens, i.e. body weight at 35 days of age (BW), ultrasound area of breast meat (BM) and hen-house egg production (HHP). A dataset with 1351 birds that were genotyped with the 600 K Affymetrix platform was used. A kinship kernel (K) was constructed as K = λ G + (1 - λ)A, where A is the numerator relationship matrix, measuring pedigree-based relatedness, and G is a genomic relationship matrix. The weight (λ) assigned to each source of information varied over the grid λ = (0, 0.2, 0.4, 0.6, 0.8, 1). Maximum likelihood estimates of heritability and genetic correlations were obtained at each λ, and the "optimum" λ was determined using cross-validation. RESULTS: Estimates of genetic correlations were affected by the weight placed on the source of information used to build K. For example, the genetic correlation between BW-HHP and BM-HHP changed markedly when λ varied from 0 (only A used for measuring relatedness) to 1 (only genomic information used). As λ increased, predictive correlations (correlation between observed phenotypes and predicted breeding values) increased and mean-squared predictive error decreased. However, the improvement in predictive ability was not monotonic, with an optimum found at some 0 < λ < 1, i.e., when both sources of information were used together. CONCLUSIONS: Our findings indicate that multiple-trait prediction may benefit from combining pedigree and marker information. Also, it appeared that expected correlated responses to selection computed from standard theory may differ from realized responses. The predictive assessment provided a metric for performance evaluation as well as a means for expressing uncertainty of outcomes of multiple-trait selection.

Differential contribution of genomic regions to marked genetic variation and prediction of quantitative traits in broiler chickens.

BACKGROUND: Genome-wide association studies in humans have found enrichment of trait-associated single nucleotide polymorphisms (SNPs) in coding regions of the genome and depletion of these in intergenic regions. However, a recent release of the ENCyclopedia of DNA elements showed that ~80 % of the human genome has a biochemical function. Similar studies on the chicken genome are lacking, thus assessing the relative contribution of its genic and non-genic regions to variation is relevant for biological studies and genetic improvement of chicken populations. METHODS: A dataset including 1351 birds that were genotyped with the 600K Affymetrix platform was used. We partitioned SNPs according to genome annotation data into six classes to characterize the relative contribution of genic and non-genic regions to genetic variation as well as their predictive power using all available quality-filtered SNPs. Target traits were body weight, ultrasound measurement of breast muscle and hen house egg production in broiler chickens. Six genomic regions were considered: intergenic regions, introns, missense, synonymous, 5' and 3' untranslated regions, and regions that are located 5 kb upstream and downstream of coding genes. Genomic relationship matrices were constructed for each genomic region and fitted in the models, separately or simultaneously. Kernel-based ridge regression was used to estimate variance components and assess predictive ability. Contribution of each class of genomic regions to dominance variance was also considered. RESULTS: Variance component estimates indicated that all genomic regions contributed to marked additive genetic variation and that the class of synonymous regions tended to have the greatest contribution. The marked dominance genetic variation explained by each class of genomic regions was similar and negligible (~0.05). In terms of prediction mean-square error, the whole-genome approach showed the best predictive ability. CONCLUSIONS: All genic and non-genic regions contributed to phenotypic variation for the three traits studied. Overall, the contribution of additive genetic variance to the total genetic variance was much greater than that of dominance variance. Our results show that all genomic regions are important for the prediction of the targeted traits, and the whole-genome approach was reaffirmed as the best tool for genome-enabled prediction of quantitative traits.

A multiple-phenotype imputation method for genetic studies.

Genetic association studies have yielded a wealth of biological discoveries. However, these studies have mostly analyzed one trait and one SNP at a time, thus failing to capture the underlying complexity of the data sets. Joint genotype-phenotype analyses of complex, high-dimensional data sets represent an important way to move beyond simple genome-wide association studies (GWAS) with great potential. The move to high-dimensional phenotypes will raise many new statistical problems. Here we address the central issue of missing phenotypes in studies with any level of relatedness between samples. We propose a multiple-phenotype mixed model and use a computationally efficient variational Bayesian algorithm to fit the model. On a variety of simulated and real data sets from a range of organisms and trait types, we show that our method outperforms existing state-of-the-art methods from the statistics and machine learning literature and can boost signals of association.

Detecting signatures of selection in nine distinct lines of broiler chickens.

Modern commercial chickens have been bred for one of two specific purposes: meat production (broilers) or egg production (layers). This has led to large phenotypic changes, so that the genomic signatures of selection may be detectable using statistical techniques. Genetic differentiation between nine distinct broiler lines was calculated using Weir and Cockerham's pairwise FST estimator for 11 003 genome-wide markers to identify regions showing evidence of differential selection across lines. Differentiation measures were averaged into overlapping sliding windows for each line, and a permutation approach was used to determine the significance of each window. A total of 51 regions were found to show significant differentiation between the lines. Several lines were consistently found to share significant regions, suggesting that the pattern of line divergence is related to selection for broiler traits. The majority of the 51 regions contain QTL relating to broiler traits, but only five of them were found to be significantly enriched for broiler QTL, including a region on chromosome 27 containing 39 broiler QTL and 114 genes. Additionally, a number of these regions have been identified by other selection mapping studies. This study has identified a large number of potential selection signatures, and further tests with higher-density marker data may narrow these regions down to individual genes.

The utility of low-density genotyping for imputation in the Thoroughbred horse.

BACKGROUND: Despite the dramatic reduction in the cost of high-density genotyping that has occurred over the last decade, it remains one of the limiting factors for obtaining the large datasets required for genomic studies of disease in the horse. In this study, we investigated the potential for low-density genotyping and subsequent imputation to address this problem. RESULTS: Using the haplotype phasing and imputation program, BEAGLE, it is possible to impute genotypes from low- to high-density (50K) in the Thoroughbred horse with reasonable to high accuracy. Analysis of the sources of variation in imputation accuracy revealed dependence both on the minor allele frequency of the single nucleotide polymorphisms (SNPs) being imputed and on the underlying linkage disequilibrium structure. Whereas equidistant spacing of the SNPs on the low-density panel worked well, optimising SNP selection to increase their minor allele frequency was advantageous, even when the panel was subsequently used in a population of different geographical origin. Replacing base pair position with linkage disequilibrium map distance reduced the variation in imputation accuracy across SNPs. Whereas a 1K SNP panel was generally sufficient to ensure that more than 80% of genotypes were correctly imputed, other studies suggest that a 2K to 3K panel is more efficient to minimize the subsequent loss of accuracy in genomic prediction analyses. The relationship between accuracy and genotyping costs for the different low-density panels, suggests that a 2K SNP panel would represent good value for money. CONCLUSIONS: Low-density genotyping with a 2K SNP panel followed by imputation provides a compromise between cost and accuracy that could promote more widespread genotyping, and hence the use of genomic information in horses. In addition to offering a low cost alternative to high-density genotyping, imputation provides a means to combine datasets from different genotyping platforms, which is becoming necessary since researchers are starting to use the recently developed equine 70K SNP chip. However, more work is needed to evaluate the impact of between-breed differences on imputation accuracy.

Genome-enabled prediction of quantitative traits in chickens using genomic annotation.

BACKGROUND: Genome-wide association studies have been deemed successful for identifying statistically associated genetic variants of large effects on complex traits. Past studies have found enrichment of trait-associated SNPs in functionally annotated regions, while depletion was reported for intergenic regions (IGR). However, no systematic examination of connections between genomic regions and predictive ability of complex phenotypes has been carried out. RESULTS: In this study, we partitioned SNPs based on their annotation to characterize genomic regions that deliver low and high predictive power for three broiler traits in chickens using a whole-genome approach. Additive genomic relationship kernels were constructed for each of the genic regions considered, and a kernel-based Bayesian ridge regression was employed as prediction machine. We found that the predictive performance for ultrasound area of breast meat from using genic regions marked by SNPs was consistently better than that from SNPs in IGR, while IGR tagged by SNPs were better than the genic regions for body weight and hen house egg production. We also noted that predictive ability delivered by the whole battery of markers was close to the best prediction achieved by one of the genomic regions. CONCLUSIONS: Whole-genome regression methods use all available quality filtered SNPs into a model, contrary to accommodating only validated SNPs from exonic or coding regions. Our results suggest that, while differences among genomic regions in terms of predictive ability were observed, the whole-genome approach remains as a promising tool if interest is on prediction of complex traits.

Genotype imputation to increase sample size in pedigreed populations.

Genotype imputation is a cost-effective way to increase the power of genomic selection or genome-wide association studies. While several genotype imputation algorithms are available, this chapter focuses on a heuristic algorithm, as implemented in the AlphaImpute software. This algorithm combines long-range phasing, haplotype library imputation, and segregation analysis and it is specifically designed to work with pedigreed populations.The chapter is organized in different sections. First the challenges related to genotype imputation in pedigreed populations are described, along with the specifics of the imputation algorithm used in AlphaImpute. In the second section, factors affecting the accuracy of genotype imputation using this algorithm are discussed. The different parameters that control AlphaImpute are detailed and examples of how to apply AlphaImpute are given.

Extending long-range phasing and haplotype library imputation methods to impute genotypes on sex chromosomes.

AlphaImpute is a flexible and accurate genotype imputation tool that was originally designed for the imputation of genotypes on autosomal chromosomes. In some species, sex chromosomes comprise a large portion of the genome. For example, chromosome Z represents approximately 8% of the chicken genome and therefore is likely to be important in determining genetic variation in a population. When breeding programs make selection decisions based on genomic information, chromosomes that are not represented on the genotyping platform will not be subject to selection. Therefore imputation algorithms should be able to impute genotypes for all chromosomes. The objective of this research was to extend AlphaImpute so that it could impute genotypes on sex chromosomes. The accuracy of imputation was assessed using different genotyping strategies in a real commercial chicken population. The correlation between true and imputed genotypes was high in all the scenarios and was 0.96 for the most favourable scenario. Overall, the accuracy of imputation of the sex chromosome was slightly lower than that of autosomes for all scenarios considered.