Thin Films of Chlorinated Vanadyl Phthalocyanines as Active Layers of Chemiresistive Sensors for the Detection of Ammonia.

Halogenated metal phthalocyanines are promising materials for the manufacture of active layers of chemiresistive sensors for the detection of various gases. Despite the high interest in such sensors, there are few systematic studies of the position of halogen substituents in phthalocyanine macroring on the chemiresistive response of their films to gases. In this work, we prepared and studied films of novel tetrachlorosubstituted vanadyl phthalocyanine derivatives with Cl substituents in the peripheral (VOPcCl4-p) and nonperipheral (VOPcCl4-np) positions of the phthalocyanine ring as active layers of chemiresistive sensors to reveal the effect of the position of substituents on their structure and sensor response to low concentrations of NH3. It was shown that the films of VOPcCl4-p exhibited a noticeably higher sensor response to NH3 than the VOPcCl4-np ones. The limit of detection of NH3 was 0.7 ppm. The sensing layers demonstrated a reversible sensor response at room temperature with fairly low response/recovery times. It was also demonstrated that NH3 can be detected in the presence of various interfering gases (CO2 and H2) and some volatile organic vapors, as well as in a mixture of gases with a composition close to exhaled air.

Cobalt and Iron Phthalocyanine Derivatives: Effect of Substituents on the Structure of Thin Films and Their Sensor Response to Nitric Oxide.

In this work, we study the effect of substituents in cobalt(II) and iron(II) phthalocyanines (CoPcR4 and FePcR4 with R = H, F, Cl, tBu) on the structural features of their films, and their chemi-resistive sensor response to a low concentration of nitric oxide. For the correct interpretation of diffractograms of phthalocyanine films, structures of CoPcCl4 and FePcCl4 single crystals were determined for the first time. Films were tested as active layers for the determination of low concentrations of NO (10-1000 ppb). It was found that the best sensor response to NO was observed for the films of chlorinated derivatives MPcCl4 (M = Co, Fe), while the lowest response was in the case of MPc(tBu)4 films. FePcCl4 films exhibited the maximal response to NO, with a calculated limit of detection (LOD) of 3 ppb; the response and recovery times determined at 30 ppb of NO were 30 s and 80 s, respectively. The LOD of a CoPcCl4 film was 7 ppb. However, iron phthalocyanine films had low stability and their sensitivity to NO decreased rapidly over time, while the response of cobalt phthalocyanine films remained stable for at least several months. In order to explain the obtained regularities, quantum chemical calculations of the binding parameters between NO and phthalocyanine molecules were carried out. It was shown that the binding of NO to the side atoms of phthalocyanines occurred through van der Waals forces, and the values of the binding energies were in direct correlation with the values of the sensor response to NO.

Role of the Cohen-Fano interference in recoil-induced rotation.

We study the rotational dynamics induced by the recoil effect in diatomic molecules using time-resolved two-color x-ray pump-probe spectroscopy. A short pump x-ray pulse ionizes a valence electron inducing the molecular rotational wave packet, whereas the second time-delayed x-ray pulse probes the dynamics. An accurate theoretical description is used for analytical discussions and numerical simulations. Our main attention is paid to the following two interference effects that influence the recoil-induced dynamics: (i) Cohen-Fano (CF) two-center interference between partial ionization channels in diatomics and (ii) interference between the recoil-excited rotational levels manifesting as the rotational revival structures in the time-dependent absorption of the probe pulse. The time-dependent x-ray absorption is computed for the heteronuclear CO and homonuclear N2 molecules as showcases. It is found that the effect of CF interference is comparable with the contribution from independent partial ionization channels, especially for the low photoelectron kinetic energy case. The amplitude of the recoil-induced revival structures for the individual ionization decreases monotonously with a decrease in the photoelectron energy, whereas the amplitude of the CF contribution remains sufficient even at the photoelectron kinetic energy below 1 eV. The profile and intensity of the CF interference depend on the phase difference between the individual ionization channels related to the parity of the molecular orbital emitting the photoelectron. This phenomenon provides a sensitive tool for the symmetry analysis of molecular orbitals.

Charge-transfer plasmons of complex nanoparticle arrays connected by conductive molecular bridges.

Charge-transfer plasmons (CTP) in complexes of metal nanoparticles bridged by conductive molecular linkers are theoretically analysed using a statistic approach. The applied model takes into account the kinetic energy of carriers inside the linkers including its dissipation and the Coulomb energy of the charged nanoparticles. The plasmons are statistically investigated for systems containing a large number of complexes of bridged nanoparticles of realistic sizes generated using a simplified molecular dynamics algorithm, where the geometries of the complexes are dependent on the rate of connection of the linkers with the nanoparticles. As illustrated, the distribution of CTP frequencies in the generated nanoparticle complexes is very inhomogeneous. It has a narrow peak, corresponding to CTP plasmons in dimers, and two broad peaks, corresponding mainly to low and high-frequency oscillations in chains of connected nanoparticles. It is found that in general the plasmon frequencies depend inversely on the value of the complex dipole moment of the plasmon oscillation, where the assumption follows that low-frequency plasmons will be more efficiently excited in an external electromagnetic field. To calculate the CTP energy absorption in this field two model modifications are proposed: a system-external electromagnetic field interaction model and a simplified broadening plasmon peak model where the plasmons are calculated at first without damping and where the delta-shaped oscillation peaks are broadened then due to the damping. It is demonstrated that both modifications lead to a wide and almost monotonic absorption in the IR region for all generated systems containing a large number of bridged nanoparticles due to the presence of a large number of CTPs in this region.

Time-resolved study of recoil-induced rotation by X-ray pump - X-ray probe spectroscopy.

Modern stationary X-ray spectroscopy is unable to resolve rotational structure. In the present paper, we propose to use time-resolved two color X-ray pump-probe spectroscopy with picosecond resolution for real-time monitoring of the rotational dynamics induced by the recoil effect. The proposed technique consists of two steps. The first short pump X-ray pulse ionizes the valence electron, which transfers angular momentum to the molecule. The second time-delayed short probe X-ray pulse resonantly excites a 1s electron to the created valence hole. Due to the recoil-induced angular momentum the molecule rotates and changes the orientation of transition dipole moment of core-excitation with respect to the transition dipole moment of the valence ionization, which results in a temporal modulation of the probe X-ray absorption as a function of the delay time between the pulses. We developed an accurate theory of the X-ray pump-probe spectroscopy of the recoil-induced rotation and study how the energy of the photoelectron and thermal dephasing affect the structure of the time-dependent X-ray absorption using the CO molecule as a case-study. We also discuss the feasibility of experimental observation of our theoretical findings, opening new perspectives in studies of molecular rotational dynamics.

Ultrafast dissociation of ammonia: Auger Doppler effect and redistribution of the internal energy.

We study vibrationally-resolved resonant Auger (RAS) spectra of ammonia recorded in coincidence with the NH2+ fragment, which is produced in the course of dissociation either in the core-excited 1s-14a11 intermediate state or the first spectator 3a-24a11 final state. Correlation of the NH2+ ion flight times with electron kinetic energies allows directly observing the Auger-Doppler dispersion for each vibrational state of the fragment. The median distribution of the kinetic energy release EKER, derived from the coincidence data, shows three distinct branches as a function of Auger electron kinetic energy Ee: Ee + 1.75EKER = const for the molecular band; EKER = const for the fragment band; and Ee + EKER = const for the region preceding the fragment band. The deviation of the molecular band dispersion from Ee + EKER = const is attributed to the redistribution of the available energy to the dissociation energy and excitation of the internal degrees of freedom in the molecular fragment. We found that for each vibrational line the dispersive behavior of EKERvs. Ee is very sensitive to the instrumental uncertainty in the determination of EKER causing the competition between the Raman (EKER + Ee = const) and Auger (Ee = const) dispersions: increase in the broadening of the finite kinetic energy release resolution leads to a change of the dispersion from the Raman to the Auger one.

Hydrogen bond effects in multimode nuclear dynamics of acetic acid observed via resonant x-ray scattering.

A theoretical and experimental study of the gas phase and liquid acetic acid based on resonant inelastic x-ray scattering (RIXS) spectroscopy is presented. We combine and compare different levels of theory for an isolated molecule for a comprehensive analysis, including electronic and vibrational degrees of freedom. The excitation energy scan over the oxygen K-edge absorption reveals nuclear dynamic effects in the core-excited and final electronic states. The theoretical simulations for the monomer and two different forms of the dimer are compared against high-resolution experimental data for pure liquid acetic acid. We show that the theoretical model based on a dimer describes the hydrogen bond formation in the liquid phase well and that this bond formation sufficiently alters the RIXS spectra, allowing us to trace these effects directly from the experiment. Multimode vibrational dynamics is accounted for in our simulations by using a hybrid time-dependent stationary approach for the quantum nuclear wave packet simulations, showing the important role it plays in RIXS.

Vibrational resonant inelastic X-ray scattering in liquid acetic acid: a ruler for molecular chain lengths.

Quenching of vibrational excitations in resonant inelastic X-ray scattering (RIXS) spectra of liquid acetic acid is observed. At the oxygen core resonance associated with localized excitations at the O-H bond, the spectra lack the typical progression of vibrational excitations observed in RIXS spectra of comparable systems. We interpret this phenomenon as due to strong rehybridization of the unoccupied molecular orbitals as a result of hydrogen bonding, which however cannot be observed in x-ray absorption but only by means of RIXS. This allows us to address the molecular structure of the liquid, and to determine a lower limit for the average molecular chain length.

Chlorosubstituted Copper Phthalocyanines: Spectral Study and Structure of Thin Films.

In this work, the tetra-, octa- and hexadecachloro-substituted copper phthalocyanines CuPcClx (where x can equal 4, 8 or 16) were investigated by the methods of vibrational (IR and Raman) spectroscopy and X-ray diffraction. The assignment of the most intense bands, both in IR and Raman spectra, was carried out on the basis of DFT calculations. The structure of a CuPcCl4 single crystal grown by sublimation in vacuum was refined for the first time. The effect of chloro-substitution on the structure of CuPcClx thin films deposited in a vacuum onto a glass substrate at 50 and 200 °C was studied. It was shown that CuPcCl4 formed polycrystalline films with the preferential orientation of the (100) crystallographic plane of crystallites parallel to the substrate surface when deposited on a substrate at 50 °C. Introduction of more Cl-substituents into the phthalocyanine macrocycle leads to the formation of amorphous films on the substrates at 50 °C. At the elevated substrate temperature, the growth of polycrystalline disordered films was observed for all three copper phthalocyanines.

Fluorinated Metal Phthalocyanines: Interplay between Fluorination Degree, Films Orientation, and Ammonia Sensing Properties.

In this work, the sensor response of MPcFx (M = Cu, Co, Zn; x = 0, 4, 16) films toward gaseous NH3 (10⁻50 ppm) was studied by a chemiresistive method and compared to that of unsubstituted MPc films to reveal the effects of central metals and F-substituents on the sensing properties. A combination of atomic force microscopy and X-ray diffraction techniques have been used to elucidate the structural features of thin MPcFx films deposited by organic molecular beam deposition. It has been shown that the sensor response of MPcF4 films to ammonia is noticeably higher than that of MPc films, which is in good correlation with the values of binding energy between the metal phthalocyanine and NH3 molecules, as calculated by the density functional theory (DFT) method. At the same time, in contrast to the DFT calculations, MPcF16 demonstrated the lesser sensor response compared with MPcF4, which appeared to be connected with the different structure and morphology of their films. The ZnPcF4 films were shown to exhibit a sensitivity to ammonia up to concentrations as low as 0.1 ppm, and can be used for the selective detection of ammonia in the presence of some reducing gases and volatile organic compounds. Moreover, the ZnPcF4 films can be used for the detection of NH3 in the gas mixture simulating exhaled air (N2 76%, O2 16%, H2O 5%, and CO2 3%).

Single-incision pediatric endosurgery in newborns and infants.

This study focuses on the successful application of single-incision pediatric endosurgery in the treatment of congenital anomalies and acquired diseases in neonates and infants. The purpose of this scientific review consists in highlighting the spectrum, indications, applicability, and effectiveness of single-port endosurgery in children during the first 3 postnatal months.

Laparoscopic inguinal preperitoneal injection--novel technique for inguinal hernia repair: preliminary results of experimental study.

BACKGROUND: Inguinal hernia repair is the most common procedure in pediatric surgery. Suture techniques for laparoscopic inguinal hernia repair in children are easy to perform and popular with a low recurrence rate. The aim of this study was to evaluate the effect of laparoscopic preperitoneal injection of three-dimensional gel on closing of the inguinal hernia sac (IHS) in laboratory animals. MATERIALS AND METHODS: With the animals under general anesthesia, we performed peritoneoscopy in 12 male Chinchilla rabbits weighing 1200-1400 g. The endoscope was introduced into the abdominal cavity, and bilateral deep inguinal rings were identified. A Tuohy needle with the injectable polymeric bulking agent DAM+™ (three-dimensional polyacrylamide gel with silver ions [Argiform(®) from Bioform(®)]) was introduced preperitoneally. The implant was then injected across the entire orifice of the deep inguinal rings and draped over the cord structures. After completion of bilateral repairs, the rabbits were extubated and observed in the animal laboratory. Then the second laparoscopy was performed 6 months later, and the deep inguinal rings were inspected. RESULTS: The postoperative course was uneventful in all the animals. At the second laparoscopy no reopening of the entire orifice of the deep inguinal rings was noted. Accurate placement of the polymeric agent and adequate coverage of the vas deferens were accomplished in all the animals. CONCLUSIONS: This study demonstrates that the biopolymeric implant gives good postoperative results and a stable trend of closing the IHS in long-term follow-up. In conclusion, we hope that injectable polymeric bulking agents can be used for treatment of inguinal hernias of pediatric patients after additional animal and human research.

Nanotube-derived carbon foam for hydrogen sorption.

A new kind of carbon foam, which is based on the welding of single-walled carbon nanotubes, is built in a computer simulation. Its precisely defined architecture and all atomic positions allow one to perform detailed theoretical analysis of the properties. Such foam is as light as 19 of steel, while its stiffness is similar and nearly isotropic, and it represents a strong three-dimensional material with various possible applications. Furthermore, its nanoporous structure is accessible to molecular hydrogen and the potential surface analysis indicates that it should be an excellent hydrogen storage medium. Importantly, such foam is a feasible structure that can be produced based on the known tube/fullerene welding techniques.