False-negative rate and recovery efficiency performance of a validated sponge wipe sampling method.

Recovery of spores from environmental surfaces varies due to sampling and analysis methods, spore size and characteristics, surface materials, and environmental conditions. Tests were performed to evaluate a new, validated sponge wipe method using Bacillus atrophaeus spores. Testing evaluated the effects of spore concentration and surface material on recovery efficiency (RE), false-negative rate (FNR), limit of detection (LOD), and their uncertainties. Ceramic tile and stainless steel had the highest mean RE values (48.9 and 48.1%, respectively). Faux leather, vinyl tile, and painted wood had mean RE values of 30.3, 25.6, and 25.5, respectively, while plastic had the lowest mean RE (9.8%). Results show roughly linear dependences of RE and FNR on surface roughness, with smoother surfaces resulting in higher mean REs and lower FNRs. REs were not influenced by the low spore concentrations tested (3.10 × 10(-3) to 1.86 CFU/cm(2)). Stainless steel had the lowest mean FNR (0.123), and plastic had the highest mean FNR (0.479). The LOD(90) (≥1 CFU detected 90% of the time) varied with surface material, from 0.015 CFU/cm(2) on stainless steel up to 0.039 on plastic. It may be possible to improve sampling results by considering surface roughness in selecting sampling locations and interpreting spore recovery data. Further, FNR values (calculated as a function of concentration and surface material) can be used presampling to calculate the numbers of samples for statistical sampling plans with desired performance and postsampling to calculate the confidence in characterization and clearance decisions.

Inhibiting the transport of hazardous spores using polymer-based solutions.

A series of polymer solutions were developed for the purpose of immobilizing aerosolized 1-10 mu m sized hazardous biological particles. The polymer solutions were designed as tools for emergency response and remediation personnel. The inhibition of secondary aerosolization and migration of biothreat particles has important implications for public health protection and contamination cleanup. Limiting further dispersion of particles such as Bacillus anthracis spores may reduce inhalation hazards and enhance remediation efficiencies. This study evaluated film-forming polymers that have multiple functional groups capable of attracting and binding particles; these included acrylates, cellulosics, vinyl polymers, and polyurethanes. The selected polymers were combined with appropriate solvents to design solutions that met specific performance objectives. The polymer solutions were then evaluated for key characteristics, such as high adhesion, high elasticity, low density, short drying time, low viscosity, and low surface tension. These solutions were also evaluated for their adhesion to biothreat agent in a series of wind tunnel experiments using highly refined aerosolized Bacillus atrophaeus spores (a simulant for anthrax, 1-3 mu m). Results demonstrated that a polymer solution, an amphoteric acrylate identified as NS-2, was the best candidate for attaching to spores and inhibiting reaerosolization. This polymer solution was anionic, thus providing the electrostatic (coulombic) attraction to cationic spores, had low surface tension, and performed well in wind tunnel tests.