Neural correlates of visual and tactile path integration and their task related modulation.

Self-motion induces sensory signals that allow to determine travel distance (path integration). For veridical path integration, one must distinguish self-generated from externally induced sensory signals. Predictive coding has been suggested to attenuate self-induced sensory responses, while task relevance can reverse the attenuating effect of prediction. But how is self-motion processing affected by prediction and task demands, and do effects generalize across senses? In this fMRI study, we investigated visual and tactile self-motion processing and its modulation by task demands. Visual stimuli simulated forward self-motion across a ground plane. Tactile self-motion stimuli were delivered by airflow across the subjects' forehead. In one task, subjects replicated a previously observed distance (Reproduction/Active; high behavioral demand) of passive self-displacement (Reproduction/Passive). In a second task, subjects travelled a self-chosen distance (Self/Active; low behavioral demand) which was recorded and played back to them (Self/Passive). For both tasks and sensory modalities, Active as compared to Passive trials showed enhancement in early visual areas and suppression in higher order areas of the inferior parietal lobule (IPL). Contrasting high and low demanding active trials yielded supramodal enhancement in the anterior insula. Suppression in the IPL suggests this area to be a comparator of sensory self-motion signals and predictions thereof.

Visuo-tactile heading perception.

Self-motion through an environment induces various sensory signals, i.e., visual, vestibular, auditory, or tactile. Numerous studies have investigated the role of visual and vestibular stimulation for the perception of self-motion direction (heading). Here, we investigated the rarely considered interaction of visual and tactile stimuli in heading perception. Participants were presented optic flow simulating forward self-motion across a horizontal ground plane (visual), airflow toward the participants' forehead (tactile), or both. In separate blocks of trials, participants indicated perceived heading from unimodal visual or tactile or bimodal sensory signals. In bimodal trials, presented headings were either spatially congruent or incongruent with a maximum offset between visual and tactile heading of 30°. To investigate the reference frame in which visuo-tactile heading is encoded, we varied head and eye orientation during presentation of the stimuli. Visual and tactile stimuli were designed to achieve comparable precision of heading reports between modalities. Nevertheless, in bimodal trials heading perception was dominated by the visual stimulus. A change of head orientation had no significant effect on perceived heading, whereas, surprisingly, a change in eye orientation affected tactile heading perception. Overall, we conclude that tactile flow is more important to heading perception than previously thought.NEW & NOTEWORTHY We investigated heading perception from visual-only (optic flow), tactile-only (tactile flow), or bimodal self-motion stimuli in different conditions varying in head and eye position. Overall, heading perception was body or world centered and non-Bayes optimal and revealed a centripetal bias. Although being visually dominated, tactile flow revealed a significant influence during bimodal heading perception.

Micro-brushing-based technique to gain fresh urothelial cells for gene expression analysis.

The gold standard of saving fresh tissue in liquid nitrogen has some serious disadvantages in that this process is not available in daily medical routine practices even in many tumor centers. Our approach of a new minimally invasive technique is obtaining urothelial cells via micro-brushing the urinary bladder on the occasion of urological routine methods such as transurethral resection (TUR). Urothelial cells were obtained from 25 patients via two different micro-brushes from tumor tissue and from macroscopically healthy tissue during TUR. These cells were immediately transferred into RNA stabilization reagent and stored at -20°C. Later, mRNA was isolated, transcribed into cDNA, and amplified. cDNA was stored at -20°C until analysis. The mean RNA quantity was 99.5 ng/µl from tumor tissues and 66.3 ng/µl from macroscopically tumor-free tissue, enabling a considerable number of analyses. The quality of the gained cDNA allowed semi-quantitative PCR analysis of GSTM1 expression as well as quantitative PCR analysis of c-Myc expression. The new technique presents several important advantages. First, staging and grading of the stained tumor sample can be examined immediately, whereas fresh frozen sample is not examined until some days later. Further, this method can be applied in hospitals with no access to liquid nitrogen or without capability to provide an additional examination of frozen tumor sample by a pathologist. This presented minimally invasive method enables investigation of gene expression in the urinary bladder without disadvantages of the need for storage of fresh tissues in liquid nitrogen.

Operative treatment of scoliosis in proximal spinal muscular atrophy: results of 41 patients.

INTRODUCTION: The early development of progressive scoliosis with pelvic obliquity is the most significant orthopaedic problem for non-ambulatory children with spinal muscular atrophy (SMA). PATIENTS: 24 SMA patients were operated on for scoliosis using the ISOLA(®) system and 17 patients using a telescopic rod. The average age at spinal surgery was 12.3 years (6.5-22.7) in the ISOLA(®) group and 6.7 years (4.8-10.9) in the telescopic rod group. RESULTS: The Cobb angle was corrected on average from pre-operative 83°(54°-120°) to post-operative 39°(5°-70°) in the ISOLA(®) group and, respectively, from 62°(28°-86°) to 18°(0°-34°) in the telescopic rod group. Mean loss of correction at mean follow-up of 6 years (3-10) was 6°(0°-33°) in the ISOLA(®) group and at mean follow-up of 8.6 years (3-12) 13°(0°-49°) in the telescopic rod group excluding the patients with rod failure. The vital capacity is not worsened by these operations in comparison to the natural course. After telescopic rods were implanted, there were some unsatisfactory results due to crankshaft phenomenon and an increase of pelvic obliquity. CONCLUSION: Our recommendation for non-ambulatory SMA patients is to have definitive stabilisation using multisegmental instrumentation, starting from the age of 10 to 12 years.

Stress-related femoral cortical and cancellous bone density loss after collum femoris preserving uncemented total hip arthroplasty: a prospective 7-year follow-up with quantitative computed tomography.

PURPOSE: Bone loss around uncemented femoral components is suspected to precede implant loosening and contribute to problems in revision surgery. Short-stemmed cementless femoral components are designed to preserve proximal femoral bone stock and ultimately the longevity of the prosthesis. METHODS: With quantitative computed tomography-assisted osteodensitometry, we prospectively analyzed femoral cortical and cancellous bone density (BD) and contact area changes of an uncemented collum femoris preserving stem (n = 38) 10 days, 1, 3 and 7 years post-operatively. RESULTS: Seven years post-operatively, cancellous BD (mg CaHA/mL) had decreased by as much as -66 % and cortical BD by up to -27 % at the metaphyseal portion of the femur; the decrease was progressive between the 1- and 3-year examinations and halted thereafter. Contact area (in % out of a possible 100 %) decreased proximally between the 1- and 3-year follow-up. CONCLUSION: Proximal cortical and cancellous bone density loss and decrease of contact area indicate that metaphyseal fixation cannot be achieved. The lack of cortical BD loss and increase of contact area values below the trochanter minor suggest diaphyseal fixation.

Rs11892031[A] on chromosome 2q37 in an intronic region of the UGT1A locus is associated with urinary bladder cancer risk.

Recently, rs11892031[A] has been identified in a genome-wide association study (GWAS) to confer increased risk of urinary bladder cancer (UBC). To confirm this association and additionally study a possible relevance of exposure to urinary bladder carcinogens, we investigated the IfADo UBC study group, consisting of eight case-control series from different regions including 1,805 cases and 2,141 controls. This analysis was supplemented by a meta-analysis of all published data, including 13,395 cases and 54,876 controls. Rs11892031 A/A was significantly associated with UBC risk in the IfADo case-control series adjusted to cigarette smoking, gender, age and ethnicity (OR = 1.18; 95% CI = 1.02-1.37; P = 0.026). In the meta-analysis, a convincing association with UBC risk was obtained (OR = 1.19; 95% Cl = 1.12-1.26; P < 0.0001). Interestingly, the highest odds ratios were obtained for individual case-control series with a high degree of occupational exposure to polycyclic aromatic hydrocarbons and aromatic amines: cases with suspected occupational UBC (OR = 1.41) and cases from the highly industrialized Ruhr area (OR = 1.98) compared with Ruhr area controls (all combined OR = 1.46). Odds ratios were lower for study groups with no or a lower degree of occupational exposure to bladder carcinogens, such as the Hungary (OR = 1.02) or the ongoing West German case-control series (OR = 1.06). However, the possible association of rs11892031[A] with exposure to bladder carcinogens still should be interpreted with caution, because in contrast to the differences between the individual study groups, interview-based data on occupational exposure were not significantly associated with rs11892031. In conclusion, the association of rs11892031[A] with UBC risk could be confirmed in independent study groups.

Periacetabular cortical and cancellous bone mineral density loss after press-fit cup fixation: a prospective 7-year follow-up.

The impact of total hip arthroplasty on strain adaptive bone remodeling has been extensively analyzed by dual-energy x-ray absorptiometry. In this study, we present a prospective computed tomography-assisted study of periacetabular cortical and cancellous bone mineral density (in milligrams of calcium hydroxyapatite [CaHA] per milliliter, or mgCaHA/mL) changes 10 days and 1, 3, and 7 years after press-fit cup implantation for 38 hips in vivo. Cancellous bone mineral density decreased by Ø -63% ventral and Ø -85% dorsal to the cup; cortical bone mineral density, by Ø -22% ventral and Ø -18% dorsal to the cup. The presented periacetabular strain adaptive bone mineral density data are the most extensive of the current literature. Even the measured extensive cancellous bone mineral density loss was thus far of no clinical relevance because all cups showed radiographic signs of stable ingrowth.

Urinary bladder cancer risk in relation to a single nucleotide polymorphism (rs2854744) in the insulin-like growth factor-binding protein-3 (IGFBP3) gene.

Currently, twelve validated genetic variants have been identified that are associated with urinary bladder cancer (UBC) risk. However, those validated variants explain only 5-10% of the overall inherited risk. In addition, there are more than 100 published polymorphisms still awaiting validation or disproval. A particularly promising of the latter unconfirmed polymorphisms is rs2854744 that recently has been published to be associated with UBC risk. The [A] allele of rs2854744 has been reported to be associated with a higher promoter activity of the insulin-like growth factor-binding protein-3 (IGFBP3) gene, which may lead to increased IGFBP-3 plasma levels and cancer risk. Therefore, we investigated the association of rs2854744 with UBC in the IfADo case-control series consisting of 1,450 cases and 1,725 controls from Germany, Hungary, Venezuela and Pakistan. No significant association of rs2854744 with UBC risk was obtained (all study groups combined: unadjusted P = 0.4446; adjusted for age, gender and smoking habits P = 0.6510), besides a small effect of the [A] allele in the Pakistani study group opposed to the original findings (unadjusted P = 0.0508, odds ratio (OR) = 1.43 for the multiplicative model) that diminished after adjustment for age, gender and smoking habits (P = 0.7871; OR = 0.93). Associations of rs2854744 with occupational exposure to urinary bladder carcinogens and smoking habits were also not present. A meta-analysis of all available case-control series including the original discovery study resulted in an OR of 1.00 (P = 0.9562). In conclusion, we could not confirm the recently published hypothesis that rs2854744 in the IGFBP3 gene is associated with UBC risk.

Comparison of cortical and cancellous bone remodeling of the pelvis after press-fit cup total hip arthroplasty dependent on patient and prosthesis-specific characteristics: a computed tomography-assisted osteodensitometry study in vivo.

Even though periprosthetic bone loss is common after total hip arthroplasty, there is no scientific evidence whether it compromises the survival of the prosthesis. Using quantitative computed tomography-assisted osteodensitometry, we determined the pattern of periacetabular bone density (BD) changes of two different press-fit cups (54 hips) 10 days, 1 year and 3 years post-operatively. We measured cortical and cancellous BD at three points of time and evaluated the effects of patient-specific characteristics [age, gender, body mass index (BMI)], clinical function, and BD at index operation. Cancellous BD decreased in all periacetabular regions by up to -52% (p ≤ 0.001). In contrast, cortical BD above the dome of the cup remained constant while at the level of the cup it decreased by up to -17% (p ≤ 0.001). Older patients had significantly lower cortical (ventral and dorsal) and cancellous (cranial) BD values, obese patients had a higher cortical BD ventral, and patients with excellent clinical results had a higher cancellous BD ventral and dorsal to the cup. Changes in BD suggest high stress shielding of retroacetabular cancellous bone, while load is transmitted to cortical bone above the dome of the cup. Patient-specific characteristics were shown to affect BD, but long-term analysis is needed to show whether these effects are of clinical importance.

Quantitative computed tomography-assisted osteodensitometry of the pelvis after press-fit cup fixation: a prospective ten-year follow-up.

BACKGROUND: As a follow-up of a previously reported three-year study, we analyzed the periprosthetic acetabular cortical and cancellous bone density changes at ten years after implantation of a press-fit cup. METHODS: Prospective clinical, radiographic, and quantitative computed tomography examinations were performed within ten days and at mean periods of one, three, and ten years after total hip arthroplasty with a press-fit cup, a femoral stem with a tapered design, and alumina-alumina pairing. Periacetabular cortical and cancellous bone density (mg CaHA/mL) in the cranial, ventral, and dorsal regions about the cup were measured for twenty-four hips in vivo. RESULTS: All acetabular cups showed radiographic signs of stable ingrowth, and no acetabular component had to be revised. The loss of periacetabular cancellous bone density about the cup was as much as -37% cranially, -60% ventrally, and -71% dorsally; the decrease was progressive between the one-year and three-year examinations only. In contrast, cortical bone density above the dome of the acetabular cup remained constant throughout the ten-year follow-up. A moderate change in cortical bone density of -5% to -18% was seen at the level of the cup ten years postoperatively. CONCLUSIONS: Both periacetabular cortical and cancellous bone density changes were nonprogressive between the three-year and ten-year examinations after press-fit cup fixation.

Genotyping NAT2 with only two SNPs (rs1041983 and rs1801280) outperforms the tagging SNP rs1495741 and is equivalent to the conventional 7-SNP NAT2 genotype.

Genotyping N-acetyltransferase 2 (NAT2) is of high relevance for individualized dosing of antituberculosis drugs and bladder cancer epidemiology. In this study we compared a recently published tagging single nucleotide polymorphism (SNP) (rs1495741) to the conventional 7-SNP genotype (G191A, C282T, T341C, C481T, G590A, A803G and G857A haplotype pairs) and systematically analysed if novel SNP combinations outperform the latter. For this purpose, we studied 3177 individuals by PCR and phenotyped 344 individuals by the caffeine test. Although the tagSNP and the 7-SNP genotype showed a high degree of correlation (R=0.933, P<0.0001) the 7-SNP genotype nevertheless outperformed the tagging SNP with respect to specificity (1.0 vs. 0.9444, P=0.0065). Considering all possible SNP combinations in a receiver operating characteristic analysis we identified a 2-SNP genotype (C282T, T341C) that outperformed the tagging SNP and was equivalent to the 7-SNP genotype. The 2-SNP genotype predicted the correct phenotype with a sensitivity of 0.8643 and a specificity of 1.0. In addition, it predicted the 7-SNP genotype with sensitivity and specificity of 0.9993 and 0.9880, respectively. The prediction of the NAT2 genotype by the 2-SNP genotype performed similar in populations of Caucasian, Venezuelan and Pakistani background. A 2-SNP genotype predicts NAT2 phenotypes with similar sensitivity and specificity as the conventional 7-SNP genotype. This procedure represents a facilitation in individualized dosing of NAT2 substrates without losing sensitivity or specificity.

Prospective study of a cementless total hip arthroplasty with a collum femoris preserving stem and a trabeculae oriented pressfit cup: minimun 6-year follow-up.

AIM: Tissue sparing hip prostheses are becoming more and more popular especially for the treatment of younger patients. The objective of this study was to evaluate the clinical and radiological results after insertion of a tissue sparing hip prosthesis. METHOD: In 47 consecutive non-selected patients (50 hips), the clinical and radiographic results of cementless total hip arthroplasty using a collum femoris preserving stem, a pressfit cup and an alumina-polyethylene pairing were prospectively evaluated. The mean age at index-surgery was 58 (36-82) years, there were 38 women and 9 men. After a mean follow-up of 6.8 years (minimum 6.1 years), two patients had died and one patient underwent revision surgery due to aseptic loosening of the stem. RESULTS: The overall survival rate of the acetabular component was 100% and of the femoral component 98%. The mean Harris hip score at follow-up was 94 points. CONCLUSION: The mid-term survival with this type of total hip arthroplasty is excellent and compares equal with uncemented straight stems in this age group.

Excellent results with cementless total hip arthroplasty and alumina-on-alumina pairing: minimum ten-year follow-up.

Ceramic-on-ceramic coupling is thought to be a durable alternative to metal- or alumina-on-polyethylene pairing. No evidence exists suggesting superior clinical and radiological results for hydroxyapatite-coated stems versus uncoated stems. The aim of this study is to report the performance of an alumina-on-alumina bearing cementless total hip arthroplasty and to compare stems with a tapered design with and without hydroxyapatite coating. We prospectively analysed the results of cementless tapered femoral stems (40 hydroxyapatite-coated versus 22 uncoated stems), a metal-backed fibre mesh hydroxyapatite-coated socket and alumina-on-alumina pairing. Of 75 hips studied, 62 were available for follow-up (mean of 10.5 years after surgery). The average Harris hip score was 90. Only one hydroxyapatite-coated stem was revised for aseptic loosening. One instance of non-progressive osteolysis was detected around a screw of a cup. All other components showed radiographic signs of stable ingrowth. Hydroxyapatite coating of the stem had no significant impact on the clinical or radiological results. Total hip arthroplasty with the presented implant and pairing provides a durable standard for all patients requiring hip joint replacement against which all newer generations of cementless implants should be judged.

Rs710521[A] on chromosome 3q28 close to TP63 is associated with increased urinary bladder cancer risk.

Single nucleotide polymorphism (SNP) rs710521[A], located near TP63 on chromosome 3q28, was identified to be significantly associated with increased bladder cancer risk. To investigate the association of rs710521[A] and bladder cancer by new data and by meta-analysis including all published data, rs710521 was studied in 1,425 bladder cancer cases and 1,740 controls that had not been included in previous studies. Blood samples were collected from 1995 to 2010 in Germany (n = 948/1,258), Hungary (n = 262/65), Venezuela (n = 112/190) and Pakistan (n = 103/227) supplemented by a meta-analysis of 5,695 cases and 40,187 controls. Detection of a A/G substitution (rs710521) on chromosome 3q28, position 191128627 was done via fast real-time polymerase chain reaction (rt-PCR). Rs710521[A] is associated with increased risk in the unadjusted analysis (OR = 1.21; 95% Cl = 1.04-1.40; P = 0.011) and in the recessive model adjusted for age, gender, smoking habits and ethnicity (OR = 1.23; 95% Cl = 1.05-1.44; P = 0.010). No difference between individuals occupationally exposed versus not occupationally exposed to urinary bladder carcinogens was observed concerning the relevance of rs710521[A]. Similarly, rs710521[A] did not confer different susceptibility in smokers and non-smokers. Performing a meta-analysis of 5,695 cases and 40,187 controls including all published studies on rs710521, a convincing association with bladder cancer risk was obtained (OR = 1.18; 95% Cl = 1.12-1.25; P < 0.0001). However, the odds ratio is relatively small.

Progressive femoral cortical and cancellous bone density loss after uncemented tapered-design stem fixation.

BACKGROUND: Aseptic implant loosening and periprosthetic bone loss are major problems after total hip arthroplasty (THA). We present an in vivo method of computed tomography (CT) assisted osteodensitometry after THA that differentiates between cortical and cancellous bone density (BD) and area around the femoral component. METHOD: Cortical and cancellous periprosthetic femoral BD (mg CaHA/mL), area (mm(2)) and contact area between the prothesis and cortical bone were determined prospectively in 31 patients 10 days, 1 year, and 6 years after uncemented THA (mean age at implantation: 55 years) using CT-osteodensitometry. RESULTS: 6 years postoperatively, cancellous BD had decreased by as much as 41% and cortical BD by up to 27% at the metaphyseal portion of the femur; this decrease was progressive between the 1-year and 6-year examinations. Mild cortical hypertrophy was observed along the entire length of the diaphysis. No statistically significant changes in cortical BD were observed along the diaphysis of the stem. INTERPRETATION: Periprosthetic CT-assisted osteodensitometry has the technical ability to discriminate between cortical and cancellous bone structures with respect to strain-adapted remodeling. Continuous loss of cortical and cancellous BD at the femoral metaphysis, a homeostatic cortical strain configuration, and mild cortical hypertrophy along the diaphysis suggest a diaphyseal fixation of the implanted stem. CT-assisted osteodensitometry has the potential to become an effective instrument for quality control in THA by means of in vivo determination of periprosthetic BD, which may be a causal factor in implant loosening after THA.

Modes of periacetabular load transfer to cortical and cancellous bone after cemented versus uncemented total hip arthroplasty: a prospective study using computed tomography-assisted osteodensitometry.

Stress-shielding and periprosthetic bone loss after total hip arthroplasty (THA) may be clinically relevant for high-demand patients. Analysis of cortical and cancellous bone density (BD) changes in vivo after THA is of interest to basic science researchers and joint reconstruction surgeons. An insufficient periprosthetic bone stock may predispose to migration, early mechanical failure, and major problems in revision surgery. We used computed tomography (CT)-assisted osteodensitometry in two prospectively analyzed cohorts after cemented (n = 21) versus noncemented (n = 23) cup fixation. Periacetabular BD (mgCaHa/mL) was determined in five CT scans cranial and five CT scans at the level of the cup 10 days and 26 months postoperatively. For press-fit cups BD decreased significantly in all CT cans except in four out of the five scans of cortical bone cranial to the cup. The decrease was highest for cancellous bone ventral to the cup (-45 to -53%). After cemented cup fixation, significant cortical BD decrease was seen ventral to the cup (-11 to -20%). Cancellous BD decrased only ventral (-21 to -31%) and in two scans cranial (-11 and -12%) to the cup. The modes of load transfer between cemented and uncemented cups differ fundamentally. Cemented cups especially prevent the loss of cancellous bone of the acetabulum while also cortical BD loss was significantly lower in most CT scans surrounding the cemented cup compared to the press-fit component. Long-term results are required to prove whether third-generation cementing technique protects periprosthetic BD and thereby improve implant survival.

An ABJS Best Paper: Progressive cancellous and cortical bone remodeling after press-fit cup fixation: a 3-year followup.

Periprosthetic bone loss after total hip arthroplasty is common. It can be progressive and, in the extreme, may compromise survival of the prosthesis. With quantitative computed tomography, we determined the pattern of periacetabular cortical and cancellous bone density changes after press-fit cup implantation with alumina liners. We recruited 24 patients (24 hips; 15 men and nine women) with degenerative joint disease and used a press-fit cup with an alumina/alumina pairing. The average patient age was 57 years. Computed tomography examinations were performed 10 days, 1 year, and 3 years after the index operation. Cancellous bone density decreased in all periacetabular regions by as much as -66%; the decrease was progressive between the 1- and 3-year examinations. In contrast, cortical bone density above the dome of the cup remained constant but progressively decreased by as much as -22% at the level of the cup 3 years postoperatively. Within the first 3 postoperative years, progressive periacetabular remodeling of cancellous and cortical bone structures was observed after press-fit cup fixation. The bone density changes suggest high stress shielding of retroacetabular cancellous bone while load is transmitted solely to the cortical bone above the dome of the cup.

Inter-observer validation study of quantitative CT-osteodensitometry in total knee arthroplasty.

INTRODUCTION: Proximal tibial bone quality is an important factor in implant mechanical stability following total knee arthroplasty. Quantitative computed tomography (CT) osteodensitometry has been used to measure the change in bone density post-operatively. We sought to validate the inter-observer reliability of these measurements. METHODS: Sixteen CT scans were obtained on cadaveric lower limbs. Two observers independently obtained cortical and cancellous bone mineral density measurements from these scans. Eight CT scans were performed with prosthesis in situ and eight without. Results were compared using correlation coefficient and Bland-Altman analysis. RESULTS: The study showed a high correlation coefficient of greater than 0.990 for all slices. The mean difference between observers falls within two standard deviations of the mean as seen on a Bland-Altman plot. INTERPRETATION: Quantitative CT-osteodensitometry is a reproducible method to measure bone mineral density changes about the knee and shows little variation between observers.

Periacetabular bone changes after uncemented total hip arthroplasty evaluated by quantitative computed tomography.

BACKGROUND: There are few dual X-ray absorptiometry (DXA) studies on periacetabular bone density changes after cup implantation. This study was designed to analyze the load-transfer mechanism and stress pattern of periacetabular cortical and cancellous bone after implantation of a ihemispherical titanium alloy press-fit cup with alumina-alumina pairing in vivo. We introduced a novel method of computed tomography (CT)-assisted osteodensitometry. METHOD: We investigated 26 hips (26 patients) with osteoarthritis using conventional sequential CT examinations performed within the first 10 days after implantation, and after a mean period of 1.1 years postoperatively. Bone density of full, cancellous and cortical bone (mgCaHA/mL) was measured. RESULTS: At the time of follow-up, the mean bone density values of the cortical bone cranial to the cup increased by 3.6% (p = 0.03) while the cancellous bone density decreased by 18%. Cancellous bone loss was greater in the region ventral to the cup (-35%) than in the dorsal region (-30%). Cortical bone density decreased ventral to the cup (-6.4%). All these changes were statistically significant. The bone density changes in the dorsal cortical region were not significant. INTERPRETATION: The method presented is an excellent tool for detailed measurement of bone density changes around the cup after total hip arthroplasty, and allows a thorough assessment of stress shielding phenomena in vivo. The hemispherical titanium alloy press-fit cup is a rigid implant which stress shields cancellous bone and enhances load transfer to the cranial cortical bone. Further investigations will demonstrate the impact these factors have on the long-term results of the implant, and may allow a type-related predictable prognosis of the longevity of the prosthesis.

Inter- and intraobserver assessment of periacetabular osteodensitometry after cemented and uncemented total hip arthroplasty using computed tomography.

INTRODUCTION: This study was initiated to evaluate the reproducibility of a novel method for measuring the periacetabular bone density after insertion of cemented and uncemented acetabular cups using CT in vivo. MATERIALS AND METHODS: CT scans were obtained from 20 patients after cemented polyethylene cup implantation (ZCA, Zimmer, USA) and 20 patients after uncemented titanium alloy cup fixation (Cerafit, Ceraver, France). A manual segmentation of cancellous and cortical pelvic bone ventral, dorsal and cranial to the cup was undertaken. Values are given in Hounsfield units. Inter- and intraobserver studies were conducted using a special analysis software tool. To define the reproducibility of the method, all measurements were evaluated according to Bland and Altman. RESULTS: For both cemented and uncemented acetabular cups, reproducibility of bone density measurement for cortical and cancellous bone cranial, ventral and dorsal to the cup was high. There was no significant difference between the intraobsever study (two repeated measurements) and the interobserver study (two investigators), indicating the reproducibility of the method independent of the investigator. CONCLUSION: In conclusion, the periacetabular bone density measurement as conducted in this CT study is a new reproducible method for in vivo evaluation of cortical and cancellous pelvic bone after cemented and uncemented acetabular cup implantation. In vivo CT measurements will allow a thorough assessment of periacetabular stress-shielding phenomena.