Application of microwave plasma atomic emission spectrometry (MP-AES) for environmental monitoring of industrially contaminated sites in Hyderabad city.

Recently introduced microwave plasma-atomic emission spectroscopy (MP-AES) represents yet another and very important addition to the existing array of modern instrumental analytical techniques. In this study, an attempt is made to summarize the performance characteristics of MP-AES and its potential as an analytical tool for environmental studies with some practical examples from Patancheru and Uppal industrial sectors of Hyderabad city. A range of soil, sediment, water reference materials, particulate matter, and real-life samples were chosen to evaluate the performance of this new analytical technique. Analytical wavelengths were selected considering the interference effects of other concomitant elements present in different sample solutions. The detection limits for several elements were found to be in the range from 0.05 to 5 ng/g. The trace metals analyzed in both the sectors followed the topography with more pollution in the low-lying sites. The metal contents were found to be more in ground waters than surface waters. Since a decade, the pollutants are transfered from Patancheru industrial area to Musi River. After polluting Nakkavagu and turning huge tracts of agricultural lands barren besides making people residing along the rivulet impotent and sick, industrialists of Patancheru are shifting the effluents to downstream of Musi River through an 18-km pipeline from Patancheru. Since the effluent undergoes primary treatment at Common Effluent Treatment Plant (CETP) at Patanchru and travels through pipeline and mixes with sewage, the organic effluents will be diluted. But the inorganic pollutants such as heavy and toxic metals tend to accumulate in the environmental segments near and downstreams of Musi River. The data generated by MP-AES of toxic metals like Zn, Cu, and Cr in the ground and surface waters can only be attributed to pollution from Patancheru since no other sources are available to Musi River.

Removal of hazardous chlorinated VOCs from aqueous solutions using novel ZSM-5 loaded PDMS/PVDF composite membrane consisting of three hydrophobic layers.

Hydrophobic polymer possesses significant potential for selective separation of volatile organic compounds (VOCs) from their aqueous solutions by pervaporation (PV). In the present study mixed matrix hydrophobic membranes of polydimethylsiloxane (PDMS) supported on polyvinylidenefluoride (PVDF) substrate were synthesized by incorporating hydrophobic inorganic ZSM-5 filler. The indigenous membranes were crosslinked with tetraethylorthosilicate (TEOS) for the extraction of volatile chlorinated hydrocarbons such as dichloromethane (DCM), trichloromethane (TCM), 1,2-dichloroethane (DCE), and 1,1,2,2-tetrachloroethane (TeCE), which pose serious environment threat and health hazard. Thermal stability, crosslinking, crystallinity, surface morphology and swelling characteristics of the indigenously developed membranes were determined by TGA, FTIR, XRD, SEM and sorption studies, respectively. Effect of operating parameters such as feed composition and filler concentration on separation performance in terms of flux and selectivity were determined. Flux of DCM, TCM, DCE and TeCE was found to be 0.166, 0.146, 0.141 and 0.06 kg m(-2)h(-1) with selectivity of 541, 1068, 917 and 15,000, respectively, for 20% ZSM-5 filled PDMS membrane for aqueous feeds containing 1.33% (w/v) DCM, 0.8% (w/v) TCM, 0.84% (w/v) DCE and 0.28% (w/v) TeCE in water. The membrane exhibited considerable feasibility for scale-up with significant potential for removal of hazardous chlorinated VOCs from aqueous solutions.

Biosorption of nickel from aqueous solutions by Acacia leucocephala bark: Kinetics and equilibrium studies.

The biosorption of nickel(II) ions from aqueous solution by Acacia leucocephala bark was studied in a batch adsorption system as a function of pH, initial metal ion concentration, adsorbent dosage, contact time and temperature. The maximum Ni(II) adsorption was obtained at pH 5. Further, the biosorbents were characterized by Fourier Transformer Infrared Spectroscopy (FTIR). The experimental data were analysed using three sorption kinetic models viz., the pseudo-first- and second-order equations and the intraparticle diffusion model. Results show that the pseudo-second-order equation provides the best correlation for the biosorption process. The equilibrium nature of Ni(II) adsorption at different temperatures of 30, 40 and 50 degrees C have been described by the Langmuir and Freundlich isotherm models. The equilibrium data fit well Langmuir isotherm. The monolayer adsorption capacity of A. leucocephala bark as obtained from Langmuir isotherm at 30 degrees C was found to be 294.1mg/g. The Chi-square (chi(2)) and Sum of the square errors (SSE) tests were also carried out to find the best fit adsorption isotherm and kinetic model. Isotherms have been used to determine thermodynamic parameters of the process, viz., free energy change (DeltaG degrees), enthalpy change (DeltaH degrees), and entropy change (DeltaS degrees) were calculated indicating that this system was a spontaneous and endothermic process. Present investigation emphasized that A. leucocephala bark may be utilized as a low cost adsorbent for nickel removal.

Removal of nickel (II) from aqueous solutions using marine macroalgae as the sorbing biomass.

In the present study biosorption technique, the passive accumulation of metals by biomass, is used for the removal of nickel from aqueous medium. The brown algae, Sargassum sp., in its natural and acid treated forms are used as a low cost sorbent. The adsorption characteristics of nickel on Sargassum sp. are evaluated as a function of time, pH, adsorbent dosage and initial concentration of nickel. The equilibrium adsorption data are fitted to Freundlich and Langmuir adsorption isotherm models and the model parameters are evaluated. Both the models represent the experimental data satisfactorily. The adsorption follows Lagergren first order kinetic model. The monolayer adsorption capacities of natural and acid treated forms of algae as obtained from Langmuir adsorption model are found to be 181 and 250mg g(-1) respectively.

Adsorption of nickel on flyash in natural and acid treated forms.

Studies on removal of Ni2+ by adsorption on flyash and acid treated flyash have been carried out at room temperature (30+/-1 degrees C). The adsorption isotherm of Ni2+ on flyash and acid treated flyash was obtained in a batch reactor. Various parameters such as pH, initial concentration of adsorbate and adsorbent dose were studied. The experimental adsorption data fitted reasonably well to Langmuir, Freundlich and Redlich - Peterson isotherms for both the adsorbents. The adsorption follows Lagergren first order kinetic model. The monolayer adsorption model are found to be 41.7 and 62.9 mg/g respectively. Acid treated flyash has been observed to have greater adsorptive capacity than flyash in natural form.