Potential use of biomass and coal-fine waste for making briquette for sustainable energy and environment.

Biomass waste contributes 14% of the total global energy. And 15-20% of the coal-fine waste from coal mines are deposited in the rivers, ponds, etc., unused, which leads to resource wastage and environmental pollution. The present study aims utilizing biomass and coal-fine waste for producing biomass-coal briquettes without using a binding material. Three different average sizes 50, 134.3, and 199.7 µm of biomass mixture (bagasse, groundnut shell, and woodchips) and coal-fines were used to make different ratios of biomass and coal mixture briquettes. Then, it is subjected to proximate, scanning electron microscope/elemental (SEM/EDX) and thermo-gravimetric analysis (TGA) to understand its property. Proximate analysis results revealed that the biomass waste has the low ash, sensible fixed carbon, and high volatile matter content. A briquette of biomass: coal = 7:1 ratio 50-µm particle size case was chosen for SEM/EDX and TGA analysis since it holds reasonable fixed carbon value comparatively. SEM analysis revealed irregular surfaces, cracks, cavities and longitudinal cracks, veins distribution all around, ups and shallows on the surface and it is the most favorable condition for fuel combustion since oxidant reaches the core of the fuel with less resistant. TGA reconfirms the spontaneous burning characteristics of the entire volatiles and fixed carbon. EDX analysis shows that the carbon and potassium are the two major elements present in the tested briquettes.

Experimental investigation on CO2 absorption and physicochemical characteristics of different carbon-loaded aqueous solvents.

The anthropogenic carbon dioxide (CO2) denseness in the earth's atmosphere is increasing day-to-day by combusting fossil fuels for power generation. And, it is the most important greenhouse gas (GHG) responsible for 64% of global warming. Solvent-based carbon capture gained more attention towards researchers because of its easiness to integrate with the coal-fired power plant without significant modifications. During CO2 absorption, the physical property of the solvent gets changed. A change in the solvent's physicochemical property affects further CO2 absorption, thereby increasing the carbon-capture energy demand. The present experimental study encompasses CO2 absorption studies using 30 wt% aqueous monoethanolamine (MEA), 2-amino-2-methyl-1-propanol (AMP) and piperazine (PZ) followed by the detailed analysis of physicochemical properties (pH, carbon loading (α), viscosity (µ), density (ρ) and surface tension (σ)) of various CO2-loaded solutions. The results revealed that these properties are exhibiting interdependent eccentrics. Furthermore, an empirical model was developed to predict the carbon loading of the tested solvents. This model includes the tested physicochemical properties, reaction mixture temperature, diffusivity and change in the mass of solvent during carbon loading. In addition, an empirical model for viscosity as a function of temperature, carbon loading and molecular weight of solvents was developed. These models appear to predict the carbon loading and the viscosity well with greater accuracy. Graphical abstract.

Predicting the combustion behaviour of compression ignition engine fuelled with biodiesel from Stoechospermum marginatum, a macro algae.

Biodiesel is one among the recent developments in the field of renewable energy research. To enhance the combustion characteristics of compression ignition engine, industry and academicians were working towards clean and renewable energy resource. Algal biodiesel was one of the major research arenas in the recent decade of renewable energy. Bio-oil from marine brown macro algae, Stoechospermum marginatum was used as the test fuel in this study. The purpose of this numerical study was to analyse the combustion behaviour of compression ignition engine when fuelled with Stoechospermum marginatum biodiesel as a fuel. The numerical study was performed using the zero-dimensional combustion model by incorporating the dynamic combustion duration during the heat transfer using the MATLAB Simulink software. The developed model which incorporated the instantaneous combustion duration was a novel approach. Validations of the numerical results on combustion features like in-cylinder pressure, rate of pressure rise, rate of heat release, and cumulative heat release were done by comparing it with the experimental data. The deviation between the numerical and experimental values was found to be within 5 to 6%.

Experimental investigation on water absorption capacity of RHA-added cement concrete.

In the recent past, partial replacement of cement by rice husk ash (RHA) in concrete is a prime focus of global researchers for sustainable development in energy and environmental aspects. The present investigation aims at testing the water absorption capacity of the different types and sizes of the RHA-incorporated cement concrete. A design of experiments (DOE) was conducted using the Taguchi method to develop an L27 matrix to assess the individual effects of each variable. From the experimental study, decreasing the RHA size and increasing the RHA loading, higher bulk density, and surface area led to decreasing the water absorption capacity of the RHA-blended cement concrete during curing. Furthermore, 20 wt% replacement of cement by RHA in concrete furnishes the 3-fold decrease of water absorption capacity compared to normal concrete (without RHA). An empirical model was developed to predict the water absorption capacity of the RHA-incorporated cement concrete. The model indicates that RHA loading, silica content, and specific surface area are the key factors influencing the water absorption capacity of the concrete. And the model appears to be able to predict the water absorption capacity of concrete quite accurately with > 95% confidence level.

Experimental investigation of density, viscosity, and surface tension of aqueous tetrabutylammonium-based ionic liquids.

The physical properties such as density, dynamic viscosity, and surface tension of aqueous tetrabutylammonium-based ionic liquids were measured experimentally by varying temperature (283.4 to 333.4 K) and concentration of ILs (10-50 wt%) at an interval of 10 K and 10 wt% respectively. In this study, the aqueous tetrabutylammonium-based ionic liquids namely tetrabutylammonium acetate [TBA][OAC], tetrabutylammonium bromide [TBA][Br], and tetrabutylammonium hydroxide [TBA][OH] was used to investigate the influence of temperature and concentration of ILs on the physical properties data was examined. It is observed that both density and surface tension increase with increasing concentration of [TBA][Br], whereas the opposite trend is observed for [TBA][OAC] and [TBA][OH] respectively. This is due to stronger molecular interaction between [TBA][Br] and water compared to other ILs. The dynamic viscosity of all aqueous ILs increases with increasing IL concentration. The measured physical properties of ILs decrease as temperature increases. Furthermore, the experimental data is correlated and compared with that of the calculated model; the agreement was satisfactory. Graphical abstract.

Start-up, performance and optimization of a compost biofilter treating gas-phase mixture of benzene and toluene.

The performance of a compost biofilter inoculated with mixed microbial consortium was optimized for treating a gas-phase mixture of benzene and toluene. The biofilter was acclimated to these VOCs for a period of ∼18d. The effects of concentration and flow rate on the removal efficiency (RE) and elimination capacity (EC) were investigated by varying the inlet concentration of benzene (0.12-0.95g/m(3)), toluene (0.14-1.48g/m(3)) and gas-flow rate (0.024-0.072m(3)/h). At comparable loading rates, benzene removal in the mixture was reduced in the range of 6.6-41% in comparison with the individual benzene degradation. Toluene removal in mixture was even more affected as observed from the reductions in REs, ranging from 18.4% to 76%. The results were statistically interpreted by performing an analysis of variance (ANOVA) to elucidate the main and interaction effects.

Reliability, agreement, and validity of digital weighing scale with MatScan in limb load measurement.

Limb loading measurements serve as an objective evaluation of asymmetrical weight bearing in the lower limb. Digital weighing scales (DWSs) could be used in clinical settings for measurement of static limb loading. However, ambiguity exists whether limb loading measurements of DWSs are comparable with a standard tool such as MatScan. A cross-sectional study composed of 33 nondisabled participants was conducted to investigate the reliability, agreement, and validity of DWSs with MatScan in static standing. Amounts of weight distribution and plantar pressure on the individual lower limb were measured using two DWSs (A, B) and MatScan during eyes open (EO) and eyes closed (EC) conditions. The results showed that intra- and interrater reliability (3, 1) were excellent (0.94-0.97) within and between DWS A and B. Bland-Altman plot revealed good agreement between DWS and MatScan in EO and EC conditions. The area under the receiver operating characteristic curve was significant and identified as 0.68 (p = 0.01). The measurements obtained with DWSs are valid and in agreement with MatScan measurements. Hence, DWSs could be used interchangeably with MatScan and could provide clinicians an objective measurement of limb loading suitable for clinical settings.

Enhancement of oxygen mass transfer and gas holdup using palm oil in stirred tank bioreactors with xanthan solutions as simulated viscous fermentation broths.

Volumetric mass transfer coefficient (kLa) is an important parameter in bioreactors handling viscous fermentations such as xanthan gum production, as it affects the reactor performance and productivity. Published literatures showed that adding an organic phase such as hydrocarbons or vegetable oil could increase the kLa. The present study opted for palm oil as the organic phase as it is plentiful in Malaysia. Experiments were carried out to study the effect of viscosity, gas holdup, and kLa on the xanthan solution with different palm oil fractions by varying the agitation rate and aeration rate in a 5 L bench-top bioreactor fitted with twin Rushton turbines. Results showed that 10% (v/v) of palm oil raised the kLa of xanthan solution by 1.5 to 3 folds with the highest kLa value of 84.44 h(-1). It was also found that palm oil increased the gas holdup and viscosity of the xanthan solution. The kLa values obtained as a function of power input, superficial gas velocity, and palm oil fraction were validated by two different empirical equations. Similarly, the gas holdup obtained as a function of power input and superficial gas velocity was validated by another empirical equation. All correlations were found to fit well with higher determination coefficients.