Development, Analysis, and Sensory Evaluation of Improved Bread Fortified with a Plant-Based Fermented Food Product.

In response to the demand for healthier foods in the current market, this study aimed to develop a new bread product using a fermented food product (FFP), a plant-based product composed of soya flour, alfalfa meal, barley sprouts, and viable microorganisms that showed beneficial effects in previous studies. White bread products prepared with three different substitution levels (5, 10, and 15%) of FFP were evaluated for physical characteristics (loaf peak height, length, width), color indices (lightness, redness/greenness, yellowness/blueness), quality properties (loaf mass, volume, specific volume), protein content, crumb digital image analysis, and sensory characteristics. The results revealed that FFP significantly affected all studied parameters, and in most cases, there was a dose-response effect. FFP supplementation affected the nutritional profile and increased the protein content (p < 0.001). The sensory test indicated that consumer acceptance of the studied sensory attributes differed significantly between groups, and bread with high levels of FFP (10 and 15% FFP) was generally more poorly rated than the control (0%) and 5% FFP for most of the variables studied. Despite this, all groups received acceptable scores (overall liking score ≥ 5) from consumers. The sensory analysis concluded that there is a possible niche in the market for these improved versions of bread products.

A Review of Health-Beneficial Properties of Oats.

Oat is among the food crops and ancient grains cultivated and consumed worldwide. It is gaining in popularity owing to its nutritional composition and multifunctional benefits of select bioactive compounds. Beta-glucan is an important component of dietary fiber found in oat grains. It is the major active compound in oats with proven cholesterol-lowering and antidiabetic effects. Oats also provide substantial levels of other bioactive compounds such as phenolic acids, tocols, sterols, avenacosides, and avenanthramides. The consumption of oats has been determined to be beneficial for human health by promoting immunomodulation and improving gut microbiota. In addition, oat consumption assists in preventing diseases such as atherosclerosis, dermatitis, and some forms of cancer. While much has been published in relation to oat nutrients and oat fibers and their impact on major diseases, the oat industries and consumers may benefit from greater knowledge and understanding of clinical effects, range of occurrence, distribution, therapeutic doses and food functional attributes of other oat bioactives such as avenanthramides and saponins as well as other anti-inflammatory agents found in the cereal. This review focuses on the various studies relevant to the contribution of the consumption of oats and oat-based products in preventing human diseases and promoting human health.

Effects of corn distillers dried grains on dough properties and quality of Chinese steamed bread.

Chinese steamed bread (CSB) accounts for 30% of the wheat end-use in China. CSB was studied as a platform for fiber and protein enrichment, employing corn distillers dried grains. Food grade distiller's grain (FDDG) processed from co-products from the corn ethanol industry was used as the enrichment ingredient. Since CSB uses a lean formula with little or no added sugar or fat, it relies entirely on fermentation and steaming for flavor and texture development. FDDG was used to replace 0%-25% all-purpose flour (APF) in CSB formulations. Effects of FDDG on dough properties and quality of CSB were evaluated by instrumental (Farinograph, Mixolab, and Texture Analyzer), nutritional, and sensory methods. Protein and dietary fiber contents showed significant increases to 18.8% and 15.3%, respectively, for 100 g of steamed bread (25% FDDG db). Fiber in 100 g of fresh FDDG CSB ranged from 2.8 to 7.7 g. FDDG fortified doughs demonstrated higher water absorption, while dough development time, dough stability, and dough extensibility decreased significantly with partial APF replacement. FDDG contributed to increased hardness and adhesiveness in the CSB. Crumb analysis revealed reduced number of gas cells at higher FDDG substitution. FDDG enrichment reduced brightness (L*) of flour blends and CSB. Rheological and sensory analysis showed an upper level of FDDG substitution of 15% was acceptable without detriment to dough functionality, texture, and taste.

Physicochemical and nutritional properties of extrudates from food grade distiller's dried grains, garbanzo flour, and corn grits.

Distiller's dried grains and garbanzo flour were blended with corn grits for the development of extruded snacks using a single screw extruder. Distiller's dried grains were processed for food application and termed as food grade distiller's dried grains or FDDG. Effects of different level of FDDG addition (0%-20%) and extrusion process parameters such as barrel and die temperature (100-140°C), screw speed (100-200 rpm), and feed moisture content (14%-20% wet basis) on the physical properties (expansion ratio, bulk density, color parameters), functional properties (water absorption and solubility indices), and nutritional properties (total dietary fiber, soluble and insoluble dietary fiber and protein content) of the extrudates were investigated and optimized using response surface methodology. FDDG incorporation had a significant effect (p < 0.05) on the total dietary fiber, color parameters, water solubility, and water absorption indices of the extruded snacks. Desirable expanded extrudates with a high level of total dietary fiber and protein were obtained with blends containing 20% FDDG extruded at 140°C extrusion temperature, 167 rpm screw speed, and 19% feed moisture content. Results indicate garbanzo flour, and FDDG can be successfully blended with corn grits to produce nutritious gluten-free extruded snacks which are high in protein and dietary fiber.

Incidence of Penicillium verrucosum in Grain Samples from Oat Varieties Commonly Grown in South Dakota.

Ochratoxin A (OTA) can cause toxicogenic effects in humans and animals when contaminated food products are consumed. Oat ( Avena sativa), like any other cereal grain, can be contaminated with OTA when storage conditions are favorable for fungal growth and toxin production. South Dakota is among the leading oat-producing states in the United States. It is therefore important to determine the frequency of occurrence of the primary OTA-producing fungal species on oat grains produced in the state. In this study, we evaluated oat grain samples from South Dakota for the incidence of Penicillium verrucosum, the major ochratoxigenic fungus in temperate regions. Kernels from 12 oat cultivars grown at multiple locations in South Dakota from 2014 to 2016 (15 location-year combinations) were plated on dichloran yeast extract sucrose glycerol agar medium. P. verrucosum was detected on 0.30, 0.19, and 0.05% of the kernels tested in 2014, 2015, and 2016, respectively. Overall, 22 of the 360 evaluated samples had kernels contaminated with P. verrucosum. The fungal incidence of the contaminated samples ranged from 1 to 16%, and the majority of those samples originated from one location. All samples from 2014 and 2015 ( n = 240), except two, had no detectable levels of OTA. The concentration of OTA was well under the maximum limit recommended by the European Union for the two samples with detectable levels of OTA.

Production of Barbari Bread (Traditional Iranian Bread) Using Different Levels of Distillers Dried Grains with Solubles (DDGS) and Sodium Stearoyl Lactate (SSL).

Bread is one of the oldest foods known throughout history and even though it is one of the principal types of staple around the world, it usually lacks enough nutrients, including protein and fiber. As such, fortification is one of the best solutions to overcome this problem. Thus, the objective this study was to examine the effect of three levels of distillers dried grains with solubles (DDGS) (0%, 10% and 20%) in conjunction with three levels of SSL (sodium stearoyl lactate) (0%, 2% and 5%) on physical and chemical properties of Barbari bread (traditional Iranian bread). To the best of our knowledge, this is the first study to evaluate DDGS and Sodium Stearoyl-2-Lactilate (SSL), as sources of fortification in Barbari bread. The results showed that incorporation of 20% of DDGS and 0% SSL caused a significant increase in the amount of fiber and protein. As for the physical attributes, using higher amount of DDGS caused a darker color, and as for the texture parameters, the highest firmness was measured when 10% DDGS and 5% of SSL were used. Different Mixolab and Rapid Visco Analyzer (RVA) parameters also were measured with varying results. The findings of this study show that DDGS can be a valuable source of fiber and protein, which can be used as a cost effective source to fortify cereal-based products.

Influence of processing conditions on apparent viscosity and system parameters during extrusion of distiller's dried grains-based snacks.

A combination of different levels of distillers dried grains processed for food application (FDDG), garbanzo flour and corn grits were chosen as a source of high-protein and high-fiber extruded snacks. A four-factor central composite rotatable design was adopted to study the effect of FDDG level, moisture content of blends, extrusion temperature, and screw speed on the apparent viscosity, mass flow rate or MFR, torque, and specific mechanical energy or SME during the extrusion process. With increase in the extrusion temperature from 100 to 140°C, apparent viscosity, specific mechanical energy, and torque value decreased. Increase in FDDG level resulted in increase in apparent viscosity, SME and torque. FDDG had no significant effect (p > .5) on mass flow rate. SME also increased with increase in the screw speed which could be due to the higher shear rates at higher screw speeds. Screw speed and moisture content had significant negative effect (p < .05) on the torque. The apparent viscosity of dough inside the extruder and the system parameters were affected by the processing conditions. This study will be useful for control of extrusion process of blends containing these ingredients for the development of high-protein high-fiber extruded snacks.

Genetic analyses using GGE model and a mixed linear model approach, and stability analyses using AMMI bi-plot for late-maturity alpha-amylase activity in bread wheat genotypes.

Low falling number and discounting grain when it is downgraded in class are the consequences of excessive late-maturity α-amylase activity (LMAA) in bread wheat (Triticum aestivum L.). Grain expressing high LMAA produces poorer quality bread products. To effectively breed for low LMAA, it is necessary to understand what genes control it and how they are expressed, particularly when genotypes are grown in different environments. In this study, an International Collection (IC) of 18 spring wheat genotypes and another set of 15 spring wheat cultivars adapted to South Dakota (SD), USA were assessed to characterize the genetic component of LMAA over 5 and 13 environments, respectively. The data were analysed using a GGE model with a mixed linear model approach and stability analysis was presented using an AMMI bi-plot on R software. All estimated variance components and their proportions to the total phenotypic variance were highly significant for both sets of genotypes, which were validated by the AMMI model analysis. Broad-sense heritability for LMAA was higher in SD adapted cultivars (53%) compared to that in IC (49%). Significant genetic effects and stability analyses showed some genotypes, e.g. 'Lancer', 'Chester' and 'LoSprout' from IC, and 'Alsen', 'Traverse' and 'Forefront' from SD cultivars could be used as parents to develop new cultivars expressing low levels of LMAA. Stability analysis using an AMMI bi-plot revealed that 'Chester', 'Lancer' and 'Advance' were the most stable across environments, while in contrast, 'Kinsman', 'Lerma52' and 'Traverse' exhibited the lowest stability for LMAA across environments.

Microstructural, textural, and sensory properties of whole-wheat noodle modified by enzymes and emulsifiers.

With the utilization of enzymes including endoxylanase, glucose oxidase (GOX) and transglutaminase (TG), and emulsifiers comprising sodium stearoyl lactate (SSL) and soy lecithin, the microstructural, textural, and sensory properties of whole-wheat noodle (WWN) were modified. The development time and stability of whole-wheat dough (WWD) were enhanced by TG due to the formation of a more compact gluten network, and by SSL resulting from the enhanced gluten strength. Microstructure graphs by scanning electron microscopy (SEM) verified that TG and SSL promoted the connectivity of gluten network and the coverage of starch granules in WWN. TG increased the hardness and elasticity of cooked WWN, while two emulsifiers increased the noodle cohesiveness. Additionally, TG and SSL improved the sensory properties of noodle such as bite, springiness, and mouth-feel. The results suggest that TG and SSL are effective ingredients in enhancing the gluten strength of WWD and improving the qualities of WWN.

Using alternative flours as partial replacement of barbari bread formulation (traditional Iranian bread).

Wheat flour is used in most of breads because of its nutrient components and high availability, but different problems are associated with this flour, such as allergies and loss of nutrient components due to milling and refining. In this study, five flours were used (20 %) in combination with wheat flour (80 %).to produce traditional Iranian Barbari bread. These included amaranth, barley, DDGS, rye and oat. Compositional measurements of moisture, fat, fiber, protein and ash content were taken. Physical tests were done to understand the changes in color, thickness, and texture. Results showed that the gluten content of each flour had a significant effect on the texture and thickness of the bread. Bread made with rye flour had the highest L* and that made with oat flour had the highest a*. As for b*, the highest was for the bread made with DDGS. It was also determined that bread made with 20 % DDGS and 80 % wheat flour had the highest fiber and moisture content, while that made with amaranth had the highest ash content, and that with rye had the highest fat. Adding different flours to wheat changed the physical and chemical attributes of final producst significantly.

Additive-dominance genetic model analyses for late-maturity alpha-amylase activity in a bread wheat factorial crossing population.

Elevated level of late maturity α-amylase activity (LMAA) can result in low falling number scores, reduced grain quality, and downgrade of wheat (Triticum aestivum L.) class. A mating population was developed by crossing parents with different levels of LMAA. The F2 and F3 hybrids and their parents were evaluated for LMAA, and data were analyzed using the R software package 'qgtools' integrated with an additive-dominance genetic model and a mixed linear model approach. Simulated results showed high testing powers for additive and additive × environment variances, and comparatively low powers for dominance and dominance × environment variances. All variance components and their proportions to the phenotypic variance for the parents and hybrids were significant except for the dominance × environment variance. The estimated narrow-sense heritability and broad-sense heritability for LMAA were 14 and 54%, respectively. High significant negative additive effects for parents suggest that spring wheat cultivars 'Lancer' and 'Chester' can serve as good general combiners, and that 'Kinsman' and 'Seri-82' had negative specific combining ability in some hybrids despite of their own significant positive additive effects, suggesting they can be used as parents to reduce LMAA levels. Seri-82 showed very good general combining ability effect when used as a male parent, indicating the importance of reciprocal effects. High significant negative dominance effects and high-parent heterosis for hybrids demonstrated that the specific hybrid combinations; Chester × Kinsman, 'Lerma52' × Lancer, Lerma52 × 'LoSprout' and 'Janz' × Seri-82 could be generated to produce cultivars with significantly reduced LMAA level.

Changes in chemical and physical properties of Latin American wheat flour based tortillas substituted with different levels of distillers dried grains with solubles (DDGS).

Tortilla is the most popular type of bread both in South and Central America. Since the demand for this bread among different classes of society is significant, improving its nutrient content could be important. Distillers dried grains with solubles is good source of fiber and protein, and can be used in the fortification of tortilla. In this study, three levels of DDGS (0, 10 and 20 %) were substituted for wheat flour and the physical and chemical properties of the resulting products were evaluated. Results showed that for the 20 % DDGS level, minimum force was required to rupture the tortilla. The color of the tortillas substituted with 10 and 20 % DDGS were darker, being 64.11 and 59.99, respectively (P < 0.05). As for chemical properties, the samples fortified with 10 and 20 % DDGS had higher protein (9.35 and 10.78 % dried basis), fiber (2.21 and 2.33 % dried basis) and fat (23.60 and 24.65 % dried basis) values at P < 0.05. Thus, it appeared that using DDGS in wheat tortillas can improve some of the nutritional values such as protein and fiber as well as the textural properties of these breads. Further work should examine consumer acceptability of these products.