Tuning the Structure of Pd@Ni-Co Nanowires and Their Electrochemical Properties.

One-dimensional transition metal materials are promising supports for precious metals used in energy production processes. Due to their electrochemical properties, 3d-group metals (such as Ni, Co, and Fe) can actively interact with catalysts by a strong metal-support interaction. This study shows that changing the Ni:Co ratio makes it possible to modulate the structure of the catalyst supports, which, in turn, provides a tool for designing their electrical and electrochemical properties. For example, Ni1-Co9 shows the highest electrical conductivity (5.8-10-4 S/cm) among all of the materials examined. On the contrary, the Pd@Ni7-Co3 system presents the highest mass activity (>2000 mA mg-1) at 0.7 V, exceeding by several times that of commercial Pt/C (>300 mA mg-1) at the same potential. Our study opens the gateway for applications of bimetallic transition metal nanowires in catalytic conversion and energy production processes.

Carbon-Coated Iron Oxide Nanoparticles Promote Reductive Stress-Mediated Cytotoxic Autophagy in Drug-Induced Senescent Breast Cancer Cells.

The surface modification of magnetite nanoparticles (Fe3O4 NPs) is a promising approach to obtaining biocompatible and multifunctional nanoplatforms with numerous applications in biomedicine, for example, to fight cancer. However, little is known about the effects of Fe3O4 NP-associated reductive stress against cancer cells, especially against chemotherapy-induced drug-resistant senescent cancer cells. In the present study, Fe3O4 NPs in situ coated by dextran (Fe3O4@Dex) and glucosamine-based amorphous carbon coating (Fe3O4@aC) with potent reductive activity were characterized and tested against drug-induced senescent breast cancer cells (Hs 578T, BT-20, MDA-MB-468, and MDA-MB-175-VII cells). Fe3O4@aC caused a decrease in reactive oxygen species (ROS) production and an increase in the levels of antioxidant proteins FOXO3a, SOD1, and GPX4 that was accompanied by elevated levels of cell cycle inhibitors (p21, p27, and p57), proinflammatory (NFκB, IL-6, and IL-8) and autophagic (BECN1, LC3B) markers, nucleolar stress, and subsequent apoptotic cell death in etoposide-stimulated senescent breast cancer cells. Fe3O4@aC also promoted reductive stress-mediated cytotoxicity in nonsenescent breast cancer cells. We postulate that Fe3O4 NPs, in addition to their well-established hyperthermia and oxidative stress-mediated anticancer effects, can also be considered, if modified using amorphous carbon coating with reductive activity, as stimulators of reductive stress and cytotoxic effects in both senescent and nonsenescent breast cancer cells with different gene mutation statuses.

Synthesis, thermal evolution and magnetic investigations of SBA-15 silica functionalized with anchored iron phosphonate molecules.

In the current work, we report on the synthesizing of a series of novel nanocomposite materials obtained by functionalizing the SBA-15 silica matrix with anchored iron phosphonate molecules and the following thermal treatment. The obtained results reveal the formation of a unique amorphic layer of Fe-based compounds on the surface of silica walls of SBA-15 channels as a result of the organic groups' decomposition after moderate thermal treatment. Due to their unique structure, represented in an active Fe-containing amorphous coating spread over a large surface area, these materials are of great interest for their potential applications in fields such as catalysis, adsorption, and non-linear optics. The obtained materials remain amorphous, preserving the SBA-15 mesoporous structure up to temperatures of approximately 800 °C, after which the partial melting of the silica backbone is observed with the simultaneous formation of nanocrystals inside the newly-formed glassy mass. All obtained materials were characterized using such techniques as thermogravimetry, transmission and scanning electron microscopy combined with energy dispersive x-ray spectroscopy mapping, Raman spectroscopy, N2sorption analysis, x-ray diffraction, x-ray photoelectron spectroscopy, Mössbauer spectroscopy, and SQUID measurements.

Iron-Iron Oxide Core-Shell Nanochains as High-Performance Adsorbents of Crystal Violet and Congo Red Dyes from Aqueous Solutions.

The main aim of this work was to use the iron-iron oxide nanochains (Fe NCs) as adsorbents of the carcinogenic cationic crystal violet (CV) and anionic Congo red (CR) dyes from water. The investigated adsorbent was prepared by a magnetic-field-induced reduction reaction, and it revealed a typical core-shell structure. It was composed of an iron core covered by a thin Fe3O4 shell (<4 nm). The adsorption measurements conducted with UV-vis spectroscopy revealed that 15 mg of Fe NCs constituted an efficient dose to be used in the CV and CR treatment. The highest effectiveness of CV and CR removal was found for a contact time of 90 min at pH 7 and 150 min at pH 8, respectively. Kinetic studies indicated that the adsorption followed the pseudo-first-order kinetic model. The adsorption process followed the Temkin model for both dyes taking into account the highest value of the R2 coefficient, whereas in the case of CR, the Redlich-Peterson model could be also considered. The maximal adsorption capacity estimated from the Langmuir isotherms for the CV and CR was 778.47 and 348.46 mg g-1, respectively. Based on the Freundlich model, both dyes adsorbed on the Fe NCs through chemisorption, but Coulombic interactions between the dye and adsorbent cannot be excluded in the case of the CV dye. The obtained results proved that the investigated Fe NCs had an excellent adsorption ability for both dye molecules within five cycles of adsorption/desorption, and therefore, they can be considered as a promising material for water purification and environmental applications.

Investigation of iron oxide shell and iron core in magnetically-assisted synthetized wire-like nanochains.

The zerovalent iron (Fe0) nanomaterials tend to be spontaneously oxidized in the presence of oxygen. This leads to the formation of interface composed of iron core and thin iron oxide shell. These structures are frequently observed with transmission electron microscope but, at the same time, it is hard to determine the precise structural and chemical composition of oxide shell. This feature is very important for possible applications of Fe0nanostructures. Hence, the present work aims to deliver more detailed insights in this topic. The investigations are performed for the iron nanochains prepared in the magnetic-field-induce reduction of FeCl3by NaBH4. The high-resolution transmission electron microscopy, electron energy loss spectroscopy, and x-ray photoemission spectroscopy confirm that the iron nanochains are covered by very thin oxide layer not exceeding over 3 nm. Moreover, the detailed XPS analyses of O 1s and Fe 2p lines indicate that the iron oxide shell reveals Fe3O4nature. Moreover, this work demonstrated that some by-products of the reaction containing boron are presented in the sample even after a removal of the thin iron oxide shell by Ar+treatment.

Microwave Irradiation vs. Structural, Physicochemical, and Biological Features of Porous Environmentally Active Silver-Silica Nanocomposites.

Heavy metals and other organic pollutants burden the environment, and their removal or neutralization is still inadequate. The great potential for development in this area includes porous, spherical silica nanostructures with a well-developed active surface and open porosity. In this context, we modified the surface of silica spheres using a microwave field (variable power and exposure time) to increase the metal uptake potential and build stable bioactive Ag2O/Ag2CO3 heterojunctions. The results showed that the power of the microwave field (P = 150 or 700 W) had a more negligible effect on carrier modification than time (t = 60 or 150 s). The surface-activated and silver-loaded silica carrier features like morphology, structure, and chemical composition correlate with microbial and antioxidant enzyme activity. We demonstrated that the increased sphericity of silver nanoparticles enormously increased toxicity against E. coli, B. cereus, and S. epidermidis. Furthermore, such structures negatively affected the antioxidant defense system of E. coli, B. cereus, and S. epidermidis through the induction of oxidative stress, leading to cell death. The most robust effects were found for nanocomposites in which the carrier was treated for an extended period in a microwave field.

Surface Modification of PHBV Fibrous Scaffold via Lithium Borohydride Reduction.

In this study, lithium borohydride (LiBH4) reduction was used to modify the surface chemistry of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) fibers. Although the most common reaction employed in the surface treatment of polyester materials is hydrolysis, it is not suitable for fiber modification of bacterial polyesters, which are highly resistant to this type of reaction. The use of LiBH4 allowed the formation of surface hydroxyl groups under very mild conditions, which was crucial for maintaining the fibers' integrity. The presence of these groups resulted in a noticeable improvement in the surface hydrophilicity of PHBV, as revealed by contact angle measurements. After the treatment with a LiBH4 solution, the electrospun PHBV fibrous mat had a significantly greater number of viable osteoblast-like cells (SaOS-2 cell line) than the untreated mat. Moreover, the results of the cell proliferation measurements correlated well with the observed cell morphology. The most flattened SaOS-2 cells were found on the surface that supported the best cell attachment. Most importantly, the results of our study indicated that the degree of surface modification could be controlled by changing the degradation time and concentration of the borohydride solution. This was of great importance since it allowed optimization of the surface properties to achieve the highest cell-proliferation capacity.

Comparison Study of PVD Coatings: TiN/AlTiN, TiN and TiAlSiN Used in Wood Machining.

In this paper, we analyze the possibilities of the protection of tools for wood machining with PVD (Physical Vapor Deposition) hard coatings. The nanolayered TiN/AlTiN coating, nanocomposite TiAlSiN coatings, and single layer TiN coating were analyzed in order to use them for protection of tools for wood machining. Both nanostructured coatings were deposited in an industrial magnetron sputtering system on the cutting blades made of sintered carbide WC-Co, while TiN single layer coating was deposited by evaporation using thermionic arc. In the case of TiN/AlTiN nanolayer coatings the thickness of the individual TiN and AlTiN layer was in the 5-10 nm range, depending on the substrate vertical position. The microstructure and chemical composition of coatings were studied by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) method. Additionally, in the case of the TiN/AlTiN coating, which was characterized by the best durability characteristics, the transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) methods were applied. The coatings adhesion to the substrate was analyzed by scratch test method combined with optical microscopy. Nano-hardness and durability tests were performed with uncoated and coated blades using chipboard. The best results durability characteristics were observed for TiN/AlTiN nanolayered coating. Performance tests of knives protected with TiN and TiAlSiN hard coatings did not show significantly better results compared to uncoated ones.

Hybrid nanolayers of star polymers and silver nanoparticles with antibacterial activity.

The aim of this study was to obtain stable star polymer layers with incorporated silver nanoparticles (AgNPs) and to study the antimicrobial activity of these hybrid materials. In this work, a novel approach regarding the synthesis of AgNPs directly by the star polymer layer is presented. Nanolayers of poly(N,N'-dimethylaminoethyl methacrylate) and hydroxyl-bearing poly[oligo(ethylene glycol) methacrylate] (P(DMAEMA-co-OEGMA-OH)) stars, covalently bound with solid supports, were obtained through chemical reaction of hydroxyl groups in the star arms with substrate modified with imidazole derivative. Quantitative chemical composition analysis and tracking of the changes in the morphology and wettability after every step of surface modification confirmed the covalent attachment of stars with the support. In the next step, the polymer nanolayers were modified with AgNPs formed in situ using only amine groups of the star arms and followed by the crystal quartz microbalance (QCM). The analysis of the layer thickness and affinity to water, both with the shape, size and amount of silver incorporated into the layer, confirmed the efficacy of AgNPs formation. The amount of silver incorporated into layers was correlated with the molar masses of the grafted stars, and a possible location of AgNPs within layers was shown. The antibacterial activity tests of prepared nanolayers showed that obtained hybrid materials were highly effective against both gram-positive and gram-negative bacteria strains. This study shows that the obtained layers are promising as stable coatings for antibacterial applications.

The glass-like structure of iron-nickel nanochains produced by the magnetic-field-induced reduction reaction with sodium borohydride.

Preparation and detailed structural characterization of iron-nickel wire-like nanochains with Fe0.75Ni0.25, Fe0.50Ni0.50, and Fe0.25Ni0.75 compositions are reported. The investigated nanomaterials were produced by the novel template-free magnetic-field-induced reduction reaction with NaBH4 as the reducing agent. It is demonstrated that this method leads to the formation of Fe-Ni nanochains composed of spherical nanoparticles with an average diameter of 50-70 nm and with a very high degree of atomic disorder manifested as the lack of clearly developed bcc and fcc phases, which are usually observed for nano- and polycrystalline Fe-Ni species. The recorded wide-angle X-ray scattering data for the obtained Fe-Ni nanochains exhibit a strong resemblance to those obtained for bulk metallic glasses. The atomic scale structure of the investigated nanochains has been studied using pair distribution function analysis of the recorded total scattering data. The best fits to the experimental pair distribution functions have been achieved assuming two-phase models of hcp and bcc networks with the size of coherently scattering regions of about 2.5 nm in diameter, for each Fe-Ni composition. The transmission electron microscopy images indicate that the glass-like bimetallic alloy cores are covered by amorphous oxide/hydroxide shells with their thickness ranging from 2 to 5 nm. Moreover, electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and Mössbauer spectroscopy results confirm the core-shell structure of the Fe-Ni nanochains and the complex character of the shell layer which consists of several iron- and nickel-containing phases.

Evaluation of Bacterial Adhesion to the ZrO2 Atomic Layer Deposited on the Surface of Cobalt-Chromium Dental Alloy Produced by DMLS Method.

The main purpose of the research was to analyze the influence of surface modification of the cobalt-based alloy used in dental prosthetics by applying zirconium oxide (ZrO2) layers using the ALD (Atomic Layer Deposition) method. The samples were made using the DMLS (Direct Metal Laser Sintering) technique, and their surfaces were prepared in accordance with the principles of removable partial dentures (RPDs). A 50 nm-thick zirconium oxide coating was applied to the prepared substrates. This paper deals with the issues of prosthetic stomatopathy, which is a complex of pathological changes occurring in approx. 40% of the Polish population using removable dentures. Often, these changes, occurring on the mucosa, are related to improper performance, allergic reactions or the multiplication of bacteria on the surface of partial dentures. An innovative method of surface modification was proposed, together with the analysis of its influence on the physicochemical properties of the alloy and the adhesion of bacteria to the surface.

Photofunctionalization effect and biological ageing of PEEK, TiO2 and ZrO2 abutments material.

The aim of this study was to evaluate the effectiveness of UVC photofunctionalization in removing the surface carbon contamination compounds from the most used surfaces utilized in dental implantology: TiO2, ZrO2 and PEEK. Machined samples were treated by UVC light in an Ushio Therabeam SuperOsseo® device for 12 min each. Non-treated disks were set as controls. X-Ray photoelectron spectroscopy was used to monitor the changes in surface chemical composition. Photofunctionalization of the PEEK material has been analyzed here for the first time. The removal of hydrocarbons allowed by UVC irradiation was nearly twofold, and irradiation simultaneously led to an increase of H-O-C=O bonds. For TiO2 and ZrO2 surfaces, the loss of hydrocarbons detected after UVC irradiation was threefold. The chemical stability of surfaces when left at atmospheric conditions after UVC irradiation was monitored during 10 weeks. After 6 weeks the carbon contamination on TiO2 surfaces returned to the level before UVC treatment, while for ZrO2 and PEEK it was 75% and 60% of its initial value, respectively. None of the materials tested displayed any toxicity towards human fibroblasts cultured in direct contact with them, confirming their potential employment for manufacturing of implant abutments. UVC photofunctionalization can be thus regarded as a valid method in order to reverse the detrimental effects of biological ageing of implant surfaces.

Star polymer-based nanolayers with immobilized complexes of polycationic stars and DNA for deposition gene delivery and recovery of intact transfected cells.

We designed a novel thermoresponsive system of nanolayers composed of star poly[oligo(ethylene glycol) methacrylate]s (S-POEGMA) covalently bonded to a solid support and covered with polyplexes of cationic star polymers and plasmid DNA (pDNA). S-POEGMA stars were attached to the solid support via a UV-mediated "grafting to" method. To the best of our knowledge, for the first time, the conformational changes of obtained star nanolayers, occurring with changes in temperature, were studied using a quartz crystal microbalance technique. Next, the polyplexes of star poly[N,N'-dimethylaminoethyl methacrylate-ran-di(ethylene glycol) methacrylate] (S-P(DMAEMA-DEGMA)) with pDNA, exhibiting a phase transition temperature (TCP) in culture medium DMEM, were deposited on S-POEGMA layers when the temperature increased above the TCP of polyplex. The thermoresponsivity of the system was then the main mechanism for controlling the adhesion, proliferation, transfection and detachment of HT-1080 cells. The nanolayers promoted the effective cell culture and delivered nucleic acids into cells, with a transfection efficiency several times higher than that of the control. The detachment of the transfected cells was regulated only by the change of temperature. The studies demonstrated that we obtained a novel and effective system, based on a star polymer architecture, useful for gene delivery and tissue engineering applications.

Nanolayers of Poly(N,N'-Dimethylaminoethyl Methacrylate) with a Star Topology and Their Antibacterial Activity.

In this paper, we focus on the synthesis and characterization of novel stable nanolayers made of star methacrylate polymers. The effect of nanolayer modification on its antibacterial properties was also studied. A covalent immobilization of star poly(N,N'-dimethylaminoethyl methacrylate) (PDMAEMA) to benzophenone functionalized glass or silicon supports was carried out via a "grafting to" approach using UV irradiation. To date, star polymer UV immobilization has never been used for this purpose. The thickness of the resulting nanolayers increased from 30 to 120 nm with the molar mass of the immobilized stars. The successful bonding of star PDMAEMA to the supports was confirmed by surface sensitive quantitative spectroscopic methods. Next, amino groups in the polymer layer were quaternized with bromoethane, and the influence of this modification on the antibacterial properties of the obtained materials was analyzed using a selected reference strain of bacteria. The resulting star nanolayer surfaces exhibited higher antimicrobial activity against Bacillus subtilis ATCC 6633 compared to that of the linear PDMAEMA analogues grafted onto a support. These promising results and the knowledge about the influence of the topology and modification of PDMAEMA layers on their properties may help in searching for new materials for antimicrobial applications in medicine.

Dielectric and electromagnetic interference shielding properties of high entropy (Zn,Fe,Ni,Mg,Cd)Fe2O4 ferrite.

The new (Zn,Mg,Ni,Fe,Cd)Fe2O4 high entropy ferrite with average crystallite size 11.8 nm was synthesized in two stages by annealing of co-precipitated amorphous precursor. The dielectric spectroscopy confirms, that the electrical conductivity and polarization processes are associated with the mobility of electrons in the structure of ferrite. It was concluded, that the both, high frequency complex dielectric permittivity as well as complex magnetic permeability are strongly temperature and frequency dependent. The AC electrical conductivity is associated with quantum mechanical tunneling of electrons and related to the transfer of charge carriers between Fe2+ and Fe3+ ions. Moreover, the microwave absorption properties were determined. The best microwave absorption properties have been confirmed in the frequency range 1.9 to 2.1 GHz for a layer which is 0.8-1 cm thick. For this range, reflection loss (RL) is lower than -25 dB and shielding effectiveness (SE) lower than -50 dB.

Toward the Development of an Innovative Implant: NiTi Alloy Functionalized by Multifunctional ß-TCP+Ag/SiO2 Coatings.

In recent years, one of the more important and costly problems of modern medicine is the need to replace or supplement organs in order to improve the quality of human life. In this field, promising solutions seem to have been implants which are based on NiTi alloys with shape memory effects. Unfortunately, this material is susceptible to the corrosion and release of toxic nickel to the human organism. Hence, its application as a long-term material is strongly limited. Therefore, this paper presents a new solution which should help to improve the functionality of the NiTi alloy and elongate its medical stability to use. The idea was focused on functionalization of the implant surface by a biocompatible, multifunctional coating without any impact on the features of the substrate, i.e., the martensitic transformation responsible for shape memory effects. For this purpose, we prepared a colloidal suspension, composed of ß-TCP (particle size ∼450 nm) and the Ag/SiO2 nanocomposite which due to the electrophoretic deposition (EPD) led to the formation of structurally atypical calcium phosphosilicate coating. Those biomaterials formed a crack-free coating, adhering well to the NiTi surface when distributed over the entire surface, with low concentration of metallic and oxide silver (<3 at. %). At the same time, the coat-forming materials had resulted in the growth of a Gram-negative bacterial biofilm. Additionally, the additive of the silver-silica composite enhances cell proliferation, effectively a few times higher than commonly used coat-forming materials (e.g., pure ß-TCP).

Stable star polymer nanolayers and their thermoresponsiveness as a tool for controlled culture and detachment of fibroblast sheets.

In this study, we describe novel thermoresponsive star copolymer surfaces used for the first time for the culture of fibroblast sheets, followed by their detachment, controlled by a change in temperature. To date, no star polymers, or their layers, have been used for this purpose. A "grafting to" strategy was applied to obtain poly[oligo(ethylene glycol) methacrylate] star layers on functionalized solid supports. Atom transfer radical polymerization of oligo(ethylene glycol) methacrylates and glycidyl methacrylate initiated with modified poly(arylene oxindole) yielded stars with molar masses up to Mn = 380 000 g mol-1. Stars were attached to a glass substrate via the reaction between the functional epoxy groups of the stars with the amine groups of the functionalized substrate. The thickness of the layer was related to the dimensions of isolated stars in solution, which showed that multilayers were obtained. Above the phase transition temperature, polymer nanolayers were hydrophobic, thus enabling the growth of fibroblasts on their surfaces and the formation of a cell sheet. Decreasing the temperature below the phase transition temperature made the star surfaces hydrophilic. This eliminated the affinity of the surface for cells and led to detachment of the intact fibroblast sheet. These observations have shown for the first time that the star polymer architecture favors the detachment of cell sheets as compared to linear polymer analogues grafted onto supports, thus reducing the time of this process. Knowledge of the influence of the polymer topology on layer properties and cell growth and detachment can aid in the development of polymeric materials for tissue culture applications.

Photofunctionalization of dental zirconia oxide: Surface modification to improve bio-integration preserving crystal stability.

The use of zirconium oxide in dental implantology is rapidly increasing as it is regarded as being more aesthetical and biologically friendly than titanium oxide. The interaction of titanium oxide with cells and proteins has proven to be significantly affected by the inevitable atmospheric hydrocarbon contamination, defined as biological ageing. The latter has proven to be effectively reversed by UVC irradiation. Crystal structures of both Zr and Ti oxides are very similar, thus also ZrO2 is prone to contamination by hydrocarbons. In the present study we have characterized the chemical-physical changes occurring to ZrO2 after UVC irradiation. Firstly a reduction by 3-fold of carbon present on its surface. XRD analysis has indicated that UVC irradiation treatment does not affect the crystalline structure of ZrO2, suggesting that it is possible to improve cell attachment on the surface without sacrificing the mechanical strength of the material. In addition a chemical model of interaction of cell surface proteins with the almost carbon free ZrO2 surface obtainable after UVC irradiation is proposed, pointing to the important role likely played by integrins and RGD sequences originating in soluble proteins adsorbed at the cell/ZrO2 interface. Hence in clinical practice UVC photofunctionalization could improve the soft tissue seal around dental implants functioning as a valid barrier between implant and peri-implant bone, thereby improving the long-term success of implants.

Photofunctionalization of Titanium: An Alternative Explanation of Its Chemical-Physical Mechanism.

OBJECTIVES: To demonstrate that titanium implant surfaces as little as 4 weeks from production are contaminated by atmospheric hydrocarbons. This phenomenon, also known as biological ageing can be reversed by UVC irradiation technically known as photofunctionalization. To propose a new model from our experimental evidence to explain how the changes in chemical structure of the surface will affect the adsorption of amino acids on the titanium surface enhancing osteointegration. METHODS: In our study XPS and AES were used to analyze the effects of UVC irradiation (photofunctionalization) in reversing biological ageing of titanium. SEM was used to analyze any possible effects on the topography of the surface. RESULTS: UVC irradiation was able to reverse biological ageing of titanium by greatly reducing the amount of carbon contamination present on the implant surface by up to 4 times, while the topography of the surface was not affected. UVC photon energy reduces surface H2O and increases TiOH with many -OH groups being produced. These groups explain the super-hydrophilic effect from photofunctionalization when these groups come into contact with water. SIGNIFICANCE: Photofunctionalization has proven to be a valid method to reduce the amount of hydrocarbon contamination on titanium dental implants and improve biological results. The chemisorption mechanisms of amino acids, in our study, are dictated by the chemical structure and electric state present on the surface, but only in the presence of an also favourable geometrical composition at the atomical level.

Relevance of the poly(ethylene glycol) linkers in peptide surfaces for proteases assays.

Poly(ethylene glycol)s (PEGs) with different lengths were used as linkers during the preparation of peptide surfaces for protease detection. In the first approach, the PEG monolayers were prepared using a "grafting to" method on 3-aminopropyltrietoxysilane (APTES)-modified silicon wafers. Protected peptides with a fluorescent marker were synthesized by Fmoc solid phase synthesis. The protected peptide structures enabled their site-specific immobilization onto the PEG surfaces. Alternatively, the PEG-peptide surface was obtained by immobilizing a PEG-peptide conjugate directly onto the modified silicon wafer. The surfaces (composition, grafting density, hydrophilicity, and roughness) were characterized by time-of-flight-secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS), contact angle (CA), and atomic force microscopy (AFM). Introducing the PEG linker between the peptide and surface increased their resistance toward nonspecific protein adsorption. The peptide surfaces were examined as analytical platforms to study the action of trypsin as a representative protease. The products of the enzymatic hydrolysis were analyzed by fluorescence spectroscopy, electrospray ionization-mass spectrometry (ESI-MS), and ToF-SIMS. Conclusions about the optimal length of the PEG linker for the analytical application of PEG-peptide surfaces were drawn. This work demonstrates an effective synthetic procedure to obtain PEG-peptide surfaces as attractive platforms for the development of peptide microarrays.