Effect of the configuration of poly(lactic acid) and content of poly(oxyethylene) blocks to the structure and functional properties of poly(lactic acid)-block-poly(oxirane)-based nanofibrous electrospun polyester-ether-urethanes used as potential drug-delivery system.

Poly(lactic acid)-block-poly(oxirane)s (PLA-b-POE) of various compositions were prepared using a one-pot approach and then extended in a reaction with l-lysine diethyl ester diisocyanate, thereby forming polyester-ether-urethanes (PEU) with prolonged chains and units with increased degradability. The PEUs are processed by electrospinning to prepare degradable nanofibrous sheet materials with and without encapsulating the antibiotic Vancomycin (VAC). PLA block isomerism and POE blocks oligomeric content (1000 g/mol) affect the thermal properties, processability, nanofibrous sheet morphology, abiotic degradation, cytocompatibility, and encapsulated antibiotic release rate of prepared PEUs. Therefore, our findings provide an effective approach to tuning the functional properties of these advanced biocompatible materials. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2378-2387, 2019.

Changes of physical properties of PLA-based blends during early stage of biodegradation in compost.

Three biodegradable plastics materials, namely pure poly(l-lactide) (PLA), PLA with plasticizer triacetine (TAC) and the mixture PLA/polyhydroxybutyrate (PHB) and TAC were investigated concerning changes of physical properties due to biodegradation in compost at 58°C up to 16days. With rising time of degradation in compost, both number and weight molecular masses were decreasing progressively, but only marginal change of the polydispersity index was observed which indicates that biodegradation is not random process. FTIR spectroscopy revealed that in spite of the extensive decrease of molecular weight, no substantial change in chemical composition was found. The most significant modification of the spectra consisted in an appearing of the broad band in region 3100-3300cm-1, which was assigned to a formation of biofilm on the sample surfaces. This effect appeared for all three materials, however, it was much more pronounced for samples containing also triacetine. Measurement of changes in crystalline portion confirmed that amorphous phase degrades substantially faster compared to crystalline part. The plasticizer triacetine is disappearing also rather fast from the sample resulting besides other effect also in a temporary increase of Tg, which at the beginning grows almost to the value typical for PLA without plasticizer but later the Tg is decreasing due to substantial changes in molecular weight. Generally during composting, the samples keep shape for up to 8days, after that time the material disintegrates to rough powder.

Chitosan-based nanocomplexes for simultaneous loading, burst reduction and controlled release of doxorubicin and 5-fluorouracil.

In this work, nanocomplexes based on chitosan grafted by carboxy-modified polylactic acid (SPLA) were prepared with the aim of loading simultaneously two anticancer drugs - doxorubicin and 5-fluorouracil, as well as to control their release, reduce the initial burst and boost cytotoxicity. The SPLA was prepared by a polycondensation reaction, using pentetic acid as the core molecule, and linked to the chitosan backbone through a coupling reaction. Nanocomplexes loaded with both drugs were formulated by the polyelectrolyte complexation method. The structure of the SPLA was characterized by 1H NMR, while the product CS-SPLA was analyzed by FTIR-ATR to prove the occurrence of the reaction. Results showed that the diameters and ζ-potential of the nanocomplexes fall in the range 120-200nm and 20-37mV, respectively. SEM and TEM analysis confirmed the spherical shape and dimensions of the nanocomplexes. The presence of hydrophobic side chain SPLA did not influence the encapsulation efficiency of the drugs but strongly reduced the initial burst and prolonged release over time compared to unmodified chitosan. MS analysis showed that no degradation or interactions between the drugs and carrier were exhibited after loading or 24h of release had taken place, confirming the protective role of the nanocomplexes. In vitro tests demonstrated an increase in the cytotoxicity of the drugs when loaded in the prepared carriers.

Characterization of polyhydroxyalkanoates produced by Synechocystis salina from digestate supernatant.

The current commercial production of polyhydroxyalkanoates (PHA) is based on heterotrophic bacteria, using organic carbon sources from crops. To avoid the competition with food and feed production, cyanobacteria, metabolising PHA from carbon dioxide can be used. This research focuses on the investigation of the thermal and rheological properties of PHA polymers accumulated by Synechocystis salina, which had been cultivated in digestate supernatant and a mineral medium. The dried bacterial cells had a polymer content of 5.5-6.6%. The relevance of the derived PHA polymers for the common melt polymer processing was correlated with their molecular mass distribution as well as with their thermal and rheological properties. The determined thermal and rheological properties showed that PHA polymers accumulated by S. salina on digestate supernatant or mineral medium are comparable with the commercial available poly(3-hydroxybutyrate). However, the results showed that PHA polymers in general require modification before melt processing to increase their stability in the molten state.

Enhancement of temozolomide stability by loading in chitosan-carboxylated polylactide-based nanoparticles.

In the presented work, amphiphilic nanoparticles based on chitosan and carboxy-enriched polylactic acid have been prepared to improve the stability of the pro-drug temozolomide in physiological media by encapsulation. The carrier, with a diameter in the range of 150-180 nm, was able to accommodate up to 800 µg of temozolomide per mg of polymer. The obtained formulation showed good stability in physiological condition and preparation media up to 1 month. Temozolomide loaded inside the carrier exhibited greater stability than the free drug, in particular in simulated physiological solution at pH 7.4 where the hydrolysis in the inactive metabolite was clearly delayed. CS-SPLA nanoparticles demonstrated a pH-dependent TMZ release kinetics with the opportunity to increase or decrease the rate. Mass spectroscopy, UV-Vis analysis, and in vitro cell tests confirmed the improvement in temozolomide stability and effectiveness when loaded into the polymeric carrier, in comparison with the free drug.

Chitosan grafted low molecular weight polylactic acid for protein encapsulation and burst effect reduction.

Chitosan and chitosan-grafted polylactic acid as a matrix for BSA encapsulation in a nanoparticle structure were prepared through a polyelectrolyte complexation method with dextran sulfate. Polylactic acid was synthetized via a polycondensation reaction using the non-metal-based initiator methanesulfonic acid and grafted to the chitosan backbone by a coupling reaction, with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide as the condensing agent. The effect of concentration of the polymer matrix utilized herein on particle diameter, ζ-potential, encapsulation efficiency, and the release kinetic of the model protein bovine serum albumin at differing pH levels was investigated. The influence of pH and ionic strength on the behavior of the nanoparticles prepared was also researched. Results showed that grafting polylactic acid to chitosan chains reduced the initial burst effect in the kinetics of BSA release from the structure of the nanoparticles. Furthermore, a rise in encapsulation efficiency of the bovine serum albumin and diminishment in nanoparticle diameter were observed due to chitosan modification. The results suggest that both polymers actually show appreciable encapsulation efficiency; and release rate of BSA. CS-g-PLA is more suitable than unmodified CS as a carrier for controlled protein delivery.

Low molecular weight poly(lactic acid) microparticles for controlled release of the herbicide metazachlor: preparation, morphology, and release kinetics.

The preemergence chloroacetamide herbicide metazachlor was encapsulated in biodegradable low molecular weight poly(lactic acid) micro- and submicroparticles, and its release to the water environment was investigated. Three series of particles, S, M, and L, varying in their size (from 0.6 to 8 µm) and with various initial amounts of the active agent (5%, 10%, 20%, 30% w/w) were prepared by the oil-in-water solvent evaporation technique with gelatin as biodegradable surfactant. The encapsulation efficiencies reached were about 60% and appeared to be lower for smaller particles. Generally, it was found that the rate of herbicide release decreased with increasing size of particles. After 30 days the portions of the herbicide released for its highest loading (30% w/w) were 92%, 56%, and 34% for about 0.6, 0.8, and 8 µm particles, respectively. The release rates were also lower for lower herbicide loadings. Metazachlor release from larger particles tended to be a diffusion-controlled process, while for smaller particles the kinetics was strongly influenced by an initial burst release.