Polymeric Networks Containing Amine Derivatives as Organocatalysts for Knoevenagel Reaction within Continuously Driven Microfluidic Reactors.

The Knoevenagel reaction is a classic reaction in organic chemistry for the formation of C-C bonds. In this study, various catalytic monomers for Knoevenagel reactions were synthesized and polymerized via photolithography to form polymeric gel dots with a composition of 90% catalyst, 9% gelling agent and 1% crosslinker. Furthermore, these gel dots were inserted into a microfluidic reactor (MFR) and the conversion of the reaction using gel dots as catalysts in the MFR for 8 h at room temperature was studied. The gel dots containing primary amines showed a better conversion of about 83-90% with aliphatic aldehyde and 86-100% with aromatic aldehyde, compared to the tertiary amines (52-59% with aliphatic aldehyde and 77-93% with aromatic aldehydes) which resembles the reactivity of the amines. Moreover, the addition of polar solvent (water) in the reaction mixture and the swelling properties of the gel dots by altering the polymer backbone showed a significant enhancement in the conversion of the reaction, due to the increased accessibility of the catalytic sites in the polymeric network. These results suggested the primary-amine-based catalysts facilitate better conversion compared to tertiary amines and the reaction solvent had a significant influence on organocatalysis to improve the efficiency of MFR.

Hydrogel-Based Biosensors.

There is an increasing interest in sensing applications for a variety of analytes in aqueous environments, as conventional methods do not work reliably under humid conditions or they require complex equipment with experienced operators. Hydrogel sensors are easy to fabricate, are incredibly sensitive, and have broad dynamic ranges. Experiments on their robustness, reliability, and reusability have indicated the possible long-term applications of these systems in a variety of fields, including disease diagnosis, detection of pharmaceuticals, and in environmental testing. It is possible to produce hydrogels, which, upon sensing a specific analyte, can adsorb it onto their 3D-structure and can therefore be used to remove them from a given environment. High specificity can be obtained by using molecularly imprinted polymers. Typical detection principles involve optical methods including fluorescence and chemiluminescence, and volume changes in colloidal photonic crystals, as well as electrochemical methods. Here, we explore the current research utilizing hydrogel-based sensors in three main areas: (1) biomedical applications, (2) for detecting and quantifying pharmaceuticals of interest, and (3) detecting and quantifying environmental contaminants in aqueous environments.

Coupling of CO2 and epoxides catalysed by novel N-fused mesoionic carbene complexes of nickel(II).

We report the syntheses of two rigid mesoionic carbene (MIC) ligands with a carbazole backbone via an intramolecular Finkelstein-cyclisation cascade and investigate their coordination behavior towards nickel(II) acetate. Despite the nickel(II) carbene complexes 4a,b showing only minor differences in their chemical composition, they display curious differences in their chemical properties, e.g. solubility. Furthermore, the potential of these novel MIC complexes in the coupling of carbon dioxide and epoxides as well as the differences in reactivity compared to classical NHC-derived complexes are evaluated.

Dually cross-linked single networks: structures and applications.

Cross-linked polymers have attracted an immense attention over the years, however, there are many flaws of these systems, e.g. softness and brittleness; such materials possess non-adjustable properties and cannot recover from damage and thus are limited in their practical applications. Supramolecular chemistry offers a variety of dynamic interactions that when integrated into polymeric gels endow the systems with reversibility and responsiveness to external stimuli. A combination of different cross-links in a single gel could be the key to tackle these drawbacks, since covalent or chemical cross-linking serve to maintain the permanent shape of the material and to improve overall mechanical performance, whereas non-covalent cross-links impart dynamicity, reversibility, stimuli-responsiveness and often toughness to the material. In the present review we sought to give a comprehensive overview of the progress in design strategies of different types of dually cross-linked single gels made by researchers over the past decade as well as the successful implementations of these advances in many demanding fields where versatile multifunctional materials are required, such as tissue engineering, drug delivery, self-healing and adhesive systems, sensors as well as shape memory materials and actuators.

Light-responsive polymeric nanoparticles based on a novel nitropiperonal based polyester as drug delivery systems for photosensitizers in PDT.

Although nanoparticles (NPs) bear a great potential in tumour therapy, just a few nanosized drug delivery systems are commercially available. Besides their advantages like passive drug targeting and stable embedment of lipophilic active pharmaceutical ingredients, targeted drug release is a major challenge for a safe therapy. While drug release of commonly used materials depends on physiological factors, nanoparticles prepared by using stimuli responsive polymers offer a promising approach. External irradiation of light-sensitive nanoparticles enables local drug release, resulting in selective accumulation and consequently more effective treatment with less side effects. In this study light-responsive nanoparticles based on a new innovative light-responsive polyester (Nip-SLrPE) combined with poly(DL-lactide-co-glycolide) (PLGA) were prepared and examined for their physicochemical characteristics and light-triggered properties. As model drug the photosensitizer 5,10,15,20-tetrakis(m-hydroxyphenyl)chlorine (mTHPC) was incorporated and light-depending drug release was investigated. Furthermore, cytotoxic potential of selected formulations for PDT and intracellular accumulation of mTHPC were evaluated. In conclusion, nanoparticles based on the new light-sensitive Nip-SLrPE showed auspicious light-responsive properties, resulting in promising results for a smart drug delivery system.

Micellar Organocatalysis Using Smart Polymer Supports: Influence of Thermoresponsive Self-Assembly on Catalytic Activity.

Micellar catalysts with a switchable core are attractive materials in organic synthesis. However, little is known about the role of the shell forming block on the performance of the catalyst. Thermoresponsive block copolymers based on poly(N-isopropylacrylamide-co-vinyl-4,4-dimethylazlactone) attached to different permanently hydrophilic blocks, namely poly(ethylene glycol), poly(N,N-dimethylacrylamide), and poly(2,3-dihydroxypropyl acrylate), were successfully synthesized via reversible addition/fragmentation chain transfer radical polymerization (RAFT). Post-polymerization attachment of an amino-functionalized L-prolineamide using the azlactone ring-opening reaction afforded functionalized thermoresponsive block copolymers. Temperature-induced aggregation of the functionalized block copolymers was studied using dynamic light scattering. It was shown that the chemical structure of the permanently hydrophilic block significantly affected the size of the polymer self-assemblies. The functionalized block copolymers were subjected to an aldol reaction between p-nitrobenzaldehyde and cyclohexanone in water. Upon temperature-induced aggregation, an increase in conversion was observed. The enantioselectivity of the polymer-bound organocatalyst improved with an increasing hydrophilic/hydrophobic interface as a result of the different stability of the polymer aggregates.

Nanoporous aluminum oxide micropatterns prepared by hydrogel templating.

Micropatterned nanoporous aluminum oxide arrays are prepared on silicon wafer substrates by using photopolymerized poly(dimethylacrylamide) hydrogels as porogenic matrices. Hydrogel micropatterns are fabricated by spreading the prepolymer mixture on the substrate, followed by UV photopolymerization through a micropatterned mask. The hydrogel is covalently bonded to the substrate surface. Al2O3 is produced by swelling the hydrogel in a saturated aluminum nitrate solution and subsequent thermal conversion/calcination. As a result, micropatterned porous Al2O3 microdots with heights in µm range and large specific surface areas up to 274 m2 g-1 are obtained. Hence, the hydrogel fulfills a dual templating function, namely micropatterning and nanoporosity generation. The impact of varying the photopolymerization time on the properties of the products is studied. Samples are characterized by light and confocal laser scanning microscopy, scanning electron microscopy, energy-dispersive x-ray spectrometry, and Kr physisorption analysis.

Dually Crosslinked Supramolecular Hydrogel for Cancer Biomarker Sensing.

Lysophosphatidic acid (LPA) as the biomarker of early stage ovarian cancer is essentially difficult to detect due to lack of target spots. A dually crosslinked supramolecular hydrogel (DCSH) was developed to achieve sensing of LPA, which acts as a competitive guest molecule triggering the responsive crosslinking of the DCSH. Through this strategy, the surface plasmon resonance combined with optical waveguide spectroscopy could be used to quantitatively detect LPA with a responsive range covering physiological conditions (in pure form as well as mimicking LPA plasma solution) with high selectivity and sensitivity. LPA efficiently immerses into the host molecule ß-cyclodextrin (ß-CD) up to a 1:2 ratio by the competitive interaction mechanism, confirmed by one-dimensional nuclear overhauser effect spectroscopy (1D NOESY), high-resolution mass spectrometry (HRMS), isothermal titration calorimetry (ITC), and computational simulation. Our method opens a new strategy to detect biomarkers without target spots and provides a platform for surface plasmon resonance (SPR)-based sensors measuring small molecules.

Palladium-Catalyzed Polycondensation for the Synthesis of Poly(Aryl)Sulfides.

The palladium-catalyzed CS cross coupling reaction is investigated as a novel efficient tool for the synthesis of poly(phenyl)sulfide derivatives. The reaction proceeds through the polycondensation of dibromo arenes with a H2 S-surrogate to yield poly(aryl)sulfides. The reaction is generalized by the synthesis of so-far-unprecedented poly(2,5-thiophene)sulfide. Number average molecular weights (Msss ) of up to 3780 and 1770 g mol-1 for poly(phenyl)sulfide and poly(thiophene)sulfide are achieved with degrees of polymerization (DPn ) of 10 and 7, respectively. A mechanism for the new polycondensation reaction is suggested.

Investigation of Gel Properties of Novel Cryo-Clay-Silica Polymer Networks.

Several methods to increase the mechanical and swelling properties of Poly(N-isopropylacrylamide) gels are known. In this study different methods were combined to systematically alter the gel properties. The combination of nanocomposite and cryo gels as well as silica post modification was used to modulate the gel strength. This new cryo-clay-silica gel based on N-isopropylacrylamide was investigated in respect to degree of swelling, kinetic of thermo responsive behavior and tensile strength. Here, the properties of new cryo-clay-silica gel were compared with properties of clay-, silica-clay and cryo-clay gels.

Analysis of sequence-defined oligomers through Advanced Polymer Chromatography™ - mass spectrometry hyphenation.

In recent years, sequence-defined oligomers have attracted increasing interest in the polymer community and the number of new applications such as macromolecular data storage and encryption is increasing. However, techniques allowing sequence differentiation are still lacking. In this study, the focus is put towards a new strategy allowing structural distinction between sequence-defined oligomers with identical molecular weight and composition, but bearing different sequences. This technique relies on the hyphenation of size exclusion chromatography and mass spectrometry, coupled with ion mobility separation. This approach allows for a quick and easy separation and identification of oligomers with different length and/or sequence.

Thermoresponsive Catechol Based-Polyelectrolyte Complex Coatings for Controlled Release of Bortezomib.

To overcome the high relapse rate of multiple myeloma (MM), a drug delivery coating for functionalization of bone substitution materials (BSM) is reported based on adhesive, catechol-containing and stimuli-responsive polyelectrolyte complexes (PECs). This system is designed to deliver the MM drug bortezomib (BZM) directly to the anatomical site of action. To establish a gradual BZM release, the naturally occurring caffeic acid (CA) is coupled oxidatively to form poly(caffeic acid) (PCA), which is used as a polyanion for complexation. The catechol functionalities within the PCA are particularly suitable to form esters with the boronic acid group of the BZM, which are then cleaved in the body fluid to administer the drug. To achieve a more thorough control of the release, the thermoresponsive poly(N-isoproplyacrylamide-co-dimethylaminoethylmethacrylate) (P(NIPAM-co-DMAEMA)) was used as a polycation. Using turbidity measurements, it was proven that the lower critical solution temperature (LCST) character of this polymer was transferred to the PECs. Further special temperature dependent attenuated total reflection infrared spectroscopy (ATR-FTIR) showed that coatings formed by PEC immobilization exhibit a similar thermoresponsive performance. By loading the coatings with BZM and studying the release in a model system, via UV/Vis it was observed, that both aims, the retardation and the stimuli control of the release, were achieved.

Light-Responsive Serinol-Based Polyurethane Nanocarrier for Controlled Drug Release.

In the present work, a new and facile strategy for the synthesis of light-responsive polyurethanes (LrPUs) based on serinol with o-nitrobenzyl pendent groups is developed. Stable monodisperse nanoparticles from these LrPUs can be formulated reproducibly in a simple manner, which is shown by dynamic light scattering (DLS) measurements. Upon irradiation with UV light, both polymers and nanoparticles undergo rapid degradation, which is investigated by DLS, scanning electron microscopy, size exclusion chromatography, and UV-vis spectroscopy. The nanoparticles are also employed for the encapsulation of the model drug Nile Red, and by exposure to UV light, a burst release of the payload is detected via fluorescence spectroscopy. This strategy can be easily applied to the straightforward synthesis of various new serinol-based monomers with different stimuli-responsive properties and therefore expand the family of biodegradable polymers.

Dually Cross-Linked Supramolecular Hydrogel as Surface Plasmon Resonance Sensor for Small Molecule Detection.

Dually cross-linked supramolecular hydrogels (DCSH) are designed to show responsive properties while maintaining the gel structure by introducing two different kinds of cross-links. This is realized by utilizing a photo-cross-linker for permanent cross-linking and ß-cyclodextrin (ß-CD) and ferrocene (Fc) as host-guest recognition pair. The DCSH shows increased swelling in the presence of the small target molecule adamantane amine (Ada). Ada can break the non-covalent bonding between ß-CD and Fc through competitive molecular guest interaction with ß-CD. By using a combination of surface plasmon resonance and optical waveguide spectroscopy, it is possible to use this behavior to construct a reversible sensor for specific small molecule detection.

In vitro evaluation of innovative light-responsive nanoparticles for controlled drug release in intestinal PDT.

Nanoparticles (NP) have gained importance as drug delivery systems for pharmaceutical challenging drugs. Their size properties allow passive targeting of cancer tissue by exploiting the enhanced permeability and retention (EPR) effect. Furthermore, surface modifications enable an active drug targeting for diseased regions in the human body. Besides the advantages, the drug release from commonly used biodegradable NP is mostly depending on physiological circumstances. Hence, there is a need for a more controllable drug release. The use of light-responsive polymers is an innovative conception enabling a more distinct drug release by an external light stimulus. The idea provides potential for an increase in efficiency and safety of local therapies. In this study, innovative light-sensitive NP were investigated for a photodynamic therapy (PDT) of gastrointestinal tumors. Nanoparticles based on a newly developed light-responsive polycarbonate (LrPC) and poly(lactic-co-glycolic-acid) (PLGA) were loaded with the approved photosensitizer 5,10,15,20-tetrakis(m-hydroxyphenyl)chlorin (mTHPC). Mucus penetrating properties were obtained by surface PEGylation of the nanoparticles either by using LrPC in combination with a PEGylated PLA (PEG-PLA) or by a combination with PEGylated LrPC (LrPC-PEG). Cytotoxic potential in dependency of a light-induced drug release was investigated in different cytotoxicity assays. Intracellular accumulation in mucus producing colon-carcinoma cell line HT-29-MTX was analysed by HPLC and confocal laser microscopy.

End Group Stability of Atom Transfer Radical Polymerization (ATRP)-Synthesized Poly(N-isopropylacrylamide): Perspectives for Diblock Copolymer Synthesis.

Studies on the end group stability of poly(N-isopropylacrylamide) during the atom transfer radical polymerization (ATRP) process are presented. Polymerization of N-isopropylacrylamide was conducted in different solvents using a copper(I) chloride/Me6Tren catalyst complex. The influence of the ATRP solvent as well as the polymer purification process on the end group stability was investigated. For the first time, mass spectrometry results clearly underline the loss of ω end groups via an intramolecular cyclization reaction. Furthermore, an ATRP system based on a copper(I) bromide/Me6Tren catalyst complex was introduced, that showed not only good control over the polymerization process, but also provided the opportunity of block copolymerization of N-isopropylacrylamide with acrylates and other N-substituted acrylamides. The polymers were characterized using 1H-NMR spectroscopy and size exclusion chromatography. Polymer end groups were determined via ESI-TOF mass spectrometry enhanced by ion mobility separation (IMS).

Light-Responsive Serinol-Based Polycarbonate and Polyester as Degradable Scaffolds.

Stimuli-responsive self-immolative aliphatic polycarbonates (APCs) and polyesters (APEs) have attractive advantages for biomedical and pharmaceutical applications. In the present work, polycondensation of o-nitrobenzyl-protected serinol was explored as a simple route to obtain light-responsive polycarbonate (LrPC) and polyester (LrPE). By exposure to UV light, these polymers decomposed rapidly and completely into oligomers and small molecules, as detected by size exclusion chromatography (SEC), UV/vis, and 1H nuclear magnetic resonance (NMR) spectroscopies. The degradation mechanism of serinol-based APC and APE was investigated with the help of the Boc-protected model APC and APE, showing that the APC underwent intramolecular cyclization, accompanied by intermolecular transcarbamation, and degraded into oxazolidinone and 2-aminopropanol terminated oligourethanes. Different from APC, the degradation process of serinol-based APE has been proven by electrospray ionization time-of-flight mass spectrometry (ESI-ToF-MS) to follow intramolecular cyclization of the functional amine group with the remote ester group, forming a ten-membered cyclic degradation compound. Further processing of the serinol-based polymers was performed by preparation of nanoparticles (NP). With light-responsive characteristics, a drug delivery system could be potentially obtained enabling a controllable drug release. Based on this strategy, a variety of self-immolative polymers responsive to different triggers can be prepared by polycondensation without the limit of ring-opening polymerization and will expand the family of biodegradable polymers.

Light-responsive nanoparticles based on new polycarbonate polymers as innovative drug delivery systems for photosensitizers in PDT.

Nanoparticles based on biodegradable polymers are well-known as approved carrier systems for a diversity of drugs. Despite their advantages, such as the option of an active drug targeting or the physicochemical protection of instable payloads, the controlled drug release often underlies intra- and interindividual influences and is therefore difficult to predict. To circumvent this limitation, the release behavior can be optimized using light-responsive materials for the nanoparticle preparation. The resulting light-responsive nanoparticles are able to release the embedded drug after an external light-stimulus, thereby increasing efficacy and safety of the therapy. In the present study light-responsive self-immolative polymers were used for the nanoparticle manufacturing. Light-responsive polycarbonates (LrPC) as well as PEGylated LrPC (LrPC-PEG) were synthesized via ring-opening polymerization of trimethylene carbonate-based monomers and fully physico-chemically characterized. Light-responsive nano formulations were obtained by blending LrPC or (LrPC-PEG) with the FDA-approved polymer poly(DL-lactide-co-glycolide) (PLGA). The nanoparticles were loaded with the photosensitizer 5,10,15,20-tetrakis(m-hydroxyphenyl)chlorin (mTHPC). The light-induced nanoparticle degradation was analyzed as well as the drug release behavior with and without illumination. Furthermore, biological safety of the degradation products was investigated in an in vitro cell culture study.

Biomolecule Sensor Based on Azlactone-Modified Hydrogel Films.

A 3D hydrogel layer is probed by combining surface plasmon resonance with optical waveguide spectroscopy to detect biomolecules. A template terpolymer P(DMAAm-co-DMIAAm-co-VDMA) is synthesized via reversible addition-fragmentation chain-transfer polymerization. The terpolymer is then modified with an amino group bearing biotin to enable biomolecular recognition for streptavidin. A hydrogel thin layer is prepared onto a gold surface after spin-coating and photo-crosslinking of the modified polymer. Finally, the hydrogel is utilized to quantitatively detect streptavidin by using surface plasmon resonance-optical waveguide spectroscopy measurements.

Use of Light-Degradable Aliphatic Polycarbonate Nanoparticles As Drug Carrier for Photosensitizer.

Aliphatic poly(carbonate)s (APCs) with rapid and controlled degradation upon specific stimulation have great advantages for a variety of biomedical and pharmaceutical applications. In the present work, we reported a new poly(trimethylene carbonate) (PTMC)-based copolymer containing multiple 4,5-dimethoxy-2-nitrobenzyl photo cleavable groups as pendent chains. The six-membered light-responsive cyclic carbonate monomer (LrM) was first prepared from 2-(hydroxymethyl)-2-methylpropane-1,3-diol and 4,5-dimethoxy-2-nitrobenzyl alcohol and then copolymerized with trimethylene carbonate (TMC) by 1,8-diazabicyclo(5.4.0)undec-7-ene (DBU) catalyzed ring-opening polymerization (ROP) to afford the light-responsive polycarbonate (LrPC). The light-triggered decomposition of LrM and LrPC was studied by NMR, UV/vis spectroscopy, and size exclusion chromatography (SEC), as well as ESI-ToF mass spectrometry. Stable monodisperse nanoparticles with hydrodynamic diameter of 100 nm could be formulated from 25% LrPC and 75% poly(lactide- co-glycolide) (PLGA) and applied for the encapsulation of temoporfin. Upon irradiation with UV light these particles displayed a significant decrease of the particle countrate and increased the release rate of temoporfin in comparison to standard PLGA nanoparticles. This work demonstrated that a combination of encapsulation of photosensitizer and light degradation using light-responsive polymers is suitable to enhance photodynamic therapy (PDT).