Thermodynamics and Kinetics in Anisotropic Growth of One-Dimensional Midentropy Nanoribbons.

One-dimensional (1D) materials demonstrate anisotropic in-plane physical properties that enable a wide range of functionalities in electronics, photonics, valleytronics, optoelectronics, and catalysis. Here, we undertake an in-depth study of the growth mechanism for equimolar midentropy alloy of (NbTaTi)0.33S3 nanoribbons as a model system for 1D transition metal trichalcogenide structures. To understand the thermodynamic and kinetic effects in the growth process, the energetically preferred phases at different synthesis temperatures and times are investigated, and the phase evolution is inspected at a sequence of growth steps. It is uncovered that the dynamics of the growth process occurs at four different stages via preferential incorporation of chemical species at high-surface-energy facets. Also, a sequence of temperature and time dependent nonuniform to uniform phase evolutions has emerged in the composition and structure of (NbTaTi)0.33S3 which is described based on an anisotropic vapor-solid (V-S) mechanism. Furthermore, direct evidence for the 3D structure of the charge density wave (CDW) phase (width less than 100 nm) is provided by three-dimensional electron diffraction (3DED) in individual nanoribbons at cryogenic temperature, and detailed comparisons are made between the phases obtained before and after CDW transformation. This study provides important fundamental information for the design and synthesis of future 1D alloy structures.

Active States During the Reduction of CO2 by a MoS2 Electrocatalyst.

Transition-metal dichalcogenides (TMDCs) such as MoS2 are Earth-abundant catalysts that are attractive for many chemical processes, including the carbon dioxide reduction reaction (CO2RR). While many studies have correlated synthetic preparation and architectures with macroscopic electrocatalytic performance, not much is known about the state of MoS2 under functional conditions, particularly its interactions with target molecules like CO2. Here, we combine operando Mo K- and S K-edge X-ray absorption spectroscopy (XAS) with first-principles simulations to track changes in the electronic structure of MoS2 nanosheets during CO2RR. Comparison of the simulated and measured XAS discerned the existence of Mo-CO2 binding in the active state. This state perturbs hybridized Mo 4d-S 3p states and is critically mediated by sulfur vacancies induced electrochemically. The study sheds new light on the underpinnings of the excellent performance of MoS2 in CO2RR. The electronic signatures we reveal could be a screening criterion toward further gains in activity and selectivity of TMDCs in general.

Capturing dynamic ligand-to-metal charge transfer with a long-lived cationic intermediate for anionic redox.

Reversible anionic redox reactions represent a transformational change for creating advanced high-energy-density positive-electrode materials for lithium-ion batteries. The activation mechanism of these reactions is frequently linked to ligand-to-metal charge transfer (LMCT) processes, which have not been fully validated experimentally due to the lack of suitable model materials. Here we show that the activation of anionic redox in cation-disordered rock-salt Li1.17Ti0.58Ni0.25O2 involves a long-lived intermediate Ni3+/4+ species, which can fully evolve to Ni2+ during relaxation. Combining electrochemical analysis and spectroscopic techniques, we quantitatively identified that the reduction of this Ni3+/4+ species goes through a dynamic LMCT process (Ni3+/4+-O2- → Ni2+-On-). Our findings provide experimental validation of previous theoretical hypotheses and help to rationalize several peculiarities associated with anionic redox, such as cationic-anionic redox inversion and voltage hysteresis. This work also provides additional guidance for designing high-capacity electrodes by screening appropriate cationic species for mediating LMCT.

Nanostructured Conductive Metal Organic Frameworks for Sustainable Low Charge Overpotentials in Li-Air Batteries.

Lithium-oxygen batteries are among the most attractive alternatives for future electrified transportation. However, their practical application is hindered by many obstacles. Due to the insulating nature of Li2 O2 product and the slow kinetics of reactions, attaining sustainable low charge overpotentials at high rates becomes a challenge resulting in the battery's early failure and low round trip efficiency. Herein, outstanding characteristics are discovered of a conductive metal organic framework (c-MOF) that promotes the growth of nanocrystalline Li2 O2 with amorphous regions. This provides a platform for the continuous growth of Li2 O2 units away from framework, enabling a fast discharge at high current rates. Moreover, the Li2 O2 structure works in synergy with the redox mediator (RM). The conductivity of the amorphous regions of the Li2 O2 allows the RM to act directly on the Li2 O2 surface instead of catalyst edges and then transport through the electrolyte to the Li2 O2 surface. This direct charge transfer enables a small charge potential of <3.7 V under high current densities (1-2 A g-1 ) sustained for a long cycle life (100-300 cycles) for large capacities (1000-2000 mAh g-1 ). These results open a new direction for utilizing c-MOFs towards advanced energy storage systems.

2D Copper Tetrahydroxyquinone Conductive Metal-Organic Framework for Selective CO2 Electrocatalysis at Low Overpotentials.

Metal-organic frameworks (MOFs) are promising materials for electrocatalysis; however, lack of electrical conductivity in the majority of existing MOFs limits their effective utilization in the field. Herein, an excellent catalytic activity of a 2D copper (Cu)-based conductive MOF, copper tetrahydroxyquinone (CuTHQ), is reported for aqueous CO2 reduction reaction (CO2 RR) at low overpotentials. It is revealed that CuTHQ nanoflakes (NFs) with an average lateral size of 140 nm exhibit a negligible overpotential of 16 mV for the activation of this reaction, a high current density of ≈173 mA cm-2 at -0.45 V versus RHE, an average Faradaic efficiency (F.E.) of ≈91% toward CO production, and a remarkable turnover frequency as high as ≈20.82 s-1 . In the low overpotential range, the obtained CO formation current density is more than 35 and 25 times higher compared to state-of-the-art MOF and MOF-derived catalysts, respectively. The operando Cu K-edge X-ray absorption near edge spectroscopy and density functional theory calculations reveal the existence of reduced Cu (Cu+ ) during CO2 RR which reversibly returns to Cu2+ after the reaction. The outstanding CO2 catalytic functionality of conductive MOFs (c-MOFs) can open a way toward high-energy-density electrochemical systems.

Quasi-Binary Transition Metal Dichalcogenide Alloys: Thermodynamic Stability Prediction, Scalable Synthesis, and Application.

Transition metal dichalcogenide (TMDCs) alloys could have a wide range of physical and chemical properties, ranging from charge density waves to superconductivity and electrochemical activities. While many exciting behaviors of unary TMDCs have been demonstrated, the vast compositional space of TMDC alloys has remained largely unexplored due to the lack of understanding regarding their stability when accommodating different cations or chalcogens in a single-phase. Here, a theory-guided synthesis approach is reported to achieve unexplored quasi-binary TMDC alloys through computationally predicted stability maps. Equilibrium temperature-composition phase diagrams using first-principles calculations are generated to identify the stability of 25 quasi-binary TMDC alloys, including some involving non-isovalent cations and are verified experimentally through the synthesis of a subset of 12 predicted alloys using a scalable chemical vapor transport method. It is demonstrated that the synthesized alloys can be exfoliated into 2D structures, and some of them exhibit: i) outstanding thermal stability tested up to 1230 K, ii) exceptionally high electrochemical activity for the CO2 reduction reaction in a kinetically limited regime with near zero overpotential for CO formation, iii) excellent energy efficiency in a high rate Li-air battery, and iv) high break-down current density for interconnect applications. This framework can be extended to accelerate the discovery of other TMDC alloys for various applications.