Transfer-print integration of GaAs p-i-n photodiodes onto silicon nitride waveguides for near-infrared applications.

We demonstrate waveguide-detector coupling through the integration of GaAs p-i-n photodiodes (PDs) on top of silicon nitride grating couplers (GCs) by means of transfer-printing. Both single device and arrayed printing is demonstrated. The photodiodes exhibit dark currents below 20 pA and waveguide-referred responsivities of up to 0.30 A/W at 2V reverse bias, corresponding to an external quantum efficiency of 47% at 860 nm. We have integrated the detectors on top of a 10-channel on-chip arrayed waveguide grating (AWG) spectrometer, made in the commercially available imec BioPIX-300 nm platform.

1.3 µm InAs/GaAs quantum dot DFB laser integrated on a Si waveguide circuit by means of adhesive die-to-wafer bonding.

In this paper we report a single mode InAs/GaAs quantum dot distributed feedback laser at 1.3 µm wavelength heterogeneously integrated on a Si photonics waveguide circuit. Single mode lasing around 1300 nm with a side-mode suppression ratio higher than 40 dB is demonstrated. High temperature operation with continuous wave lasing up to 100°C is obtained. Threshold current densities as low as 205 A/cm2 were measured. These devices are attractive candidates to use in uncooled silicon photonic transceivers in data centers.

Integration of high-speed GaAs metal-semiconductor-metal photodetectors by means of transfer printing for 850 nm wavelength photonic interposers.

We propose and demonstrate the integration of 850 nm GaAs-based metal-semiconductor-metal (MSM) photodetectors (PDs) based on transfer printing for application in photonic interposers. Both devices that directly interface with a multimode optical fiber (with device dimensions of 70 µm × 70 µm) as well as devices that interface with a SiN waveguide layer through a grating coupler (with device dimensions of 30 µm × 30 µm) are demonstrated. The dark currents are measured to be 22 nA and 7.2 nA at 2 V bias for the larger and smaller PDs respectively. For 850 nm wavelength, the external responsivities are measured to be 0.117 A/W and 0.1 A/W at 2 V bias. 20 GHz bandwidth is measured. Open 40 Gb/s eye diagrams are realized.

Silicon-integrated short-wavelength hybrid-cavity VCSEL.

We demonstrate a short-wavelength hybrid-cavity vertical-cavity surface-emitting laser (VCSEL) heterogeneously integrated on silicon. A GaAs-based "half-VCSEL" has been attached to a dielectric distributed Bragg reflector (DBR) on a silicon wafer using ultra-thin divinylsiloxane-bis-benzocyclobutene (DVS-BCB) adhesive bonding, thereby creating a cavity with the standing-wave optical field extending over the silicon- and GaAs-based parts of the cavity. A 9 µm oxide aperture diameter VCSEL with a threshold current of 1.2 mA produces 1.6 mW optical output power at 6.0 mA bias current with a wavelength of ~845 nm.