Effect of Different Feed Particle Size on Gastrointestinal Tract Morphology, Ileal Digesta Viscosity, and Blood Biochemical Parameters as Markers of Health Status in Broiler Chickens.

The study is focused on how the physical structure of the feed affects the health status of broiler chickens. The aim of this study was to evaluate the influence of feed particle size in broiler diets on gastrointestinal tract morphology, digesta viscosity, and blood biochemical parameters. A total of 90 one-day-old male Ross 308 broiler chickens were randomly divided into three different experimental groups (with five replicates per pen), with 6 birds per cage. The first experimental group (Coarse) was fed with the coarsest particle size, with feed with a geometric mean diameter (GMD) of 1111.26 µm, the next group (Medium) was fed with a less coarse feed size of GMD 959.89 µm, and the last group (Fine) was fed a diet with a fine feed particle size of GMD 730.48 µm. The use of coarse feed particle size in the diet had a positive effect on the gizzard weight and small intestinal villi height and crypt depth, which increased the surface area intended for digesting nutrients. The use of finely ground particles in the feed increased the level of gamma-glutamyl transferase and at the same time, decreased the level of urea, which could indicate adverse changes in the liver.

Analysis of the Degradation of Pearlitic Steel Mechanical Properties Depending on the Stability of the Structural Phases.

The paper is focused on analysing the pearlitic steel phase transformations and their influence on the mechanical properties. The intention is to perform a detailed analysis of the heat treatment process using the exact heating temperature and chemical composition to achieve the optimal mechanical properties of the tool. The key area is monitoring and regulating the heat treatment. This technology is constantly undergoing an optimisation process and is an effort to introduce new trends in monitoring phase transformations and processes. The use of non-destructive methods is an adequate tool. The principle is to determine the exact structural phase at a given moment, which can be very difficult when a complex shaped part is heat treated. Which precludes the use of some other methods of phase transformation analysis. Specifically, the determination of the exact moment of finish of the austenitisation process is eminent. The monitoring of these processes will be ensured by both a non-contact pyrometer and also by the AE method with an adequate sensor and waveguide. The resulting structural phases formed after the heat treatment will be evaluated by electron microscopy, followed by the analysis of the mechanical properties of selected steels.

Rheological and Flow Behaviour of Yolk, Albumen and Liquid Whole Egg from Eggs of Six Different Poultry Species.

Liquid egg products are one of the basic raw materials for the food industry. Knowledge of their rheological and flow behaviour in real technical elements is absolutely necessary for the selection of suitable technological equipment for their processing. In this article, the rheological properties of liquid egg products were determined. Eggs from six different species of poultry are used: domestic hen (Gallus gallus domesticus) hybrid Hisex Brown; Japanese quail (Coturnix japonica); German carrier goose (Anser anser f. domestica); domestic ducks (Anas platyrhynchos f. domestica); domestic guinea fowl (Numida meleagris f. domestica); and domestic turkeys (Meleagris gallopavo f. domestica). Liquid egg products showed pseudoplastic behaviour in range of shear strain rates from 0.2 up to 200 s-1 and at the temperature of 18 °C. Thus, the flow curves were constructed using the Ostwald-de Waele rheological model, with respect to the pseudoplastic behaviour of liquid egg products. According to the values of the coefficients of determination (R2), the sum of squared estimate of errors (SSE) and the root mean square error (RMSE), this model was appropriately chosen. Using the consistency coefficient K, the flow index n and the adjusted equations for the flow rate of technical and biological fluids in standard pipelines, the 3D velocity profiles of liquid egg products were successfully modelled. The values of the Reynolds number of the individual liquid egg products were calculated, and the type of flow was also determined. A turbulent flow has been detected for some liquid egg products.

Rheological and Pipe Flow Properties of Chocolate Masses at Different Temperatures.

Chocolate masses are one of the basic raw materials for the production of confectionery. Knowledge of their rheological and flow behaviour at different temperatures is absolutely necessary for the selection of a suitable technological process in their production and subsequent processing. In this article, the rheological properties (the effect of the shear strain rate on the shear stress or viscosity) of five different chocolate masses were determined-extra dark chocolate (EDC), dark chocolate (DC), milk chocolate (MC), white chocolate (WC), and ruby chocolate (RC). These chocolate masses showed thixotropic and plastic behaviour in the selected range of shear rates from 1 to 500 s-1 and at the specified temperatures of 36, 38, 40, 42, and 44 °C. The degree of thixotropic behaviour was evaluated by the size of the hysteresis area, and flow curves were constructed using the Bingham, Herschel-Bulkley and Casson models with respect to the plastic behaviour of the chocolate masses. According to the values of the coefficients of determination R2 and the sum of the squared estimate of errors (SSE), the models were chosen appropriately. The most suitable models are the Herschel-Bulkley and Casson models, which also model the shear thinning property of the liquids (pseudoplastic with a yield stress value). Using the coefficients of the rheological models and modified equations for the flow velocity of technical and biological fluids in standard piping, the 2D and 3D velocity profiles of the chocolate masses were further successfully modelled. The obtained values of coefficients and models can be used in conventional technical practice in the design of technological equipment structures and in current trends in the food industry, such as 3D food printing.

A Rheological Analysis of Biomaterial Behaviour as a Tool to Detect the Dilution of Heather Honey.

Heather honey is a valuable and rheologically special type of honey. Its above-average selling price may motivate its intentional violation with a mixture of honey from another botanical origin, the price of which is lower on the market. This work deals with the rheological properties of such devalued heather honey in order to determine the changes in the individual rheological parameters depending on the degree of dilution of the heather honey. For this purpose, a differently diluted heather honey sample series was created and the following rheological parameters were determined: hysteresis area, n-value, yield stress (τ0), parameter B (Weltman model), parameter ϕ, or parameter C (model describing the logarithmic dependence of the complex viscosity on the angular frequency). Part of the work was research into whether the set parameters can be used as comparative parameters. It was found that the hysteresis area does not appear to be a suitable relative comparison parameter due to the high variability. The parameters that appear to be suitable are the relative parameters n-value and the parameter ϕ, which showed the greatest stability. The change in the determined rheological parameters is, depending on the degree of dilution, non-linear with a step change between the samples containing 40% (w/w) and 60% (w/w) of a heather honey.

Safety of Mealworm Meal in Layer Diets and their Influence on Gut Morphology.

The main objective of this study was to verify the safety of mealworm meal in the feed of laying hens from 17 to 42 weeks of age. Therefore, the feed mixtures were tested in terms of microbiological stability, fungal and mycotoxin content and selected parameters of hens' intestinal morphology and physiology were monitored. The experiment was carried out with 30 Lohmann Brown Classic hens. Hens were divided by body mass into three equal groups with 10 replicates per treatment. The two experimental groups received feed mixtures containing 2% and 5% yellow mealworm (Tenebrio molitor L.) meal. The third group was a control group which had 0% of mealworm meal in the diet. Diets with 2% and 5% of mealworm meals did not affect the length of villi and microbiome of the caecum. The highest digesta viscosity from the ileum was found in the group with 5% mealworm, which may indicate a slower passage of the digesta through the digestive tract. Based on our results, it may be concluded that the proportion of mealworm meals does not deteriorate the quality of feeds. Mealworm meal does not negatively affect microbial stability in experimental feeds. Therefore, it can be recommended the two and (or) five percent of mealworm meal inclusion in hen's diet.

The Use of Unconventional Malts in Beer Production and Their Effect on the Wort Viscosity.

The aim of this study was to use unconventional malts in beer production and observe their effect on the wort viscosity. Six malts were analysed in this study-barley, black barley, oat, wheat, rye, and corn. Firstly, the parameters of cereals were measured after the malting process in an experimental malting house and wort production. Samples were analysed in each phase of the mashing process. Carbohydrate contents and viscosities were analytically determined from the samples. The resulting values of the dynamic viscosity were significantly higher than the values obtained by other authors, ranging from 3.4 up to 35.5 mPa·s-1. This study also confirmed the hypothesis that states that the breakdown of carbohydrates leads to a decrease in viscosity. Values measured in the black barley malt sample were higher when compared with light barley malt. Unconventional malts had a higher viscosity and were thus more difficult to filter. If these types of malts are used it is recommended to add barley malts or malts with a higher enzyme activity to them.

A new approach to analyze the dynamic strength of eggs.

The mechanical behavior of eggshell was determined in terms of average rupture force and corresponding deformation. For the experiment, we selected goose eggs (Anser anser f. domestica). Samples of eggs were compressed along their x-axis and z-axis. The effect of the loading orientation can be described in terms of the eggshell contour curvature. Two different experimental methods were used: compression between two plates (loading rates up to 5 mm/s) and the Hopkinson split pressure bar technique. This second method enables achieving loading rates up to about 17 m/s. The response of goose eggs to this high loading rate was characterized also by simultaneous measurement of the eggshell surface displacements using a laser vibrometer and by the measurement of both circumferential and meridian strains.

Fluid dynamics of liquid egg products.

The rheological behavior of liquid egg products (egg yolk, egg white, and whole liquid egg) was studied using a concentric cylinder viscometer. Eggs of three poultry specimens were used: hen (Isa Brown), Japanese quail (Coturnix japonica), and goose (Anser anser f. domestica). Rheological behavior was pseudoplastic and flow curves fitted by the power law model (Herschel-Bulkley and Ostwald-De Waele). The meaning of rheological parameters on friction factors and velocity profiles during flow of liquid egg products in tube has been shown.