Changes in Profiles of Classes and of Individual Polyphenols in Leaves of Spiraea chamaedryfolia and Spiraea media along an Altitudinal Gradient.

Plants in high-altitude habitats are exposed to severe environmental stressors, including extreme temperatures and irradiation, which can have wide-ranging effects on changes of secondary-metabolite profiles in higher plants. Altitude-related variation of levels of polyphenols in organs of medicinal and food plant species has not yet been investigated sufficiently. This study was focused on variation in quantitative profiles of classes and of individual biologically active phenolic compounds in leaf extracts of resource species Spiraea chamaedryfolia and Spiraea media from the family Rosaceae in coenopopulations of the Altai Mountains, along an altitudinal gradient. High-performance liquid chromatography revealed 22 polyphenolic compounds in the extracts of S. media leaves, with the main polyphenolic compounds being flavonols. Sixteen compounds were found in S. chamaedryfolia leaf extracts, and the major ones were flavonols and a flavanone. Opposite responses to changes in the altitude-associated growth conditions were documented for levels of some individual polyphenolic compounds. With an increase in altitude, concentrations of chlorogenic acid and of flavanone in the extracts of S. chamaedryfolia leaves significantly increased, while concentrations of cinnamic acid, astragalin, and kaempferol diminished. A statistically significant positive correlation between the altitude of plant habitats and total levels of polyphenols and phenolcarboxylic acids was detected. In leaf extracts from S. media, an altitude increase was significantly positively correlated with astragalin, avicularin, and cinnamic acid levels and negatively correlated with hyperoside concentration.

Individual Differences in Growth and in Accumulation of Secondary Metabolites in Rhodiola rosea Cultivated in Western Siberia.

In this study, growth parameters of underground parts and concentrations of phenylpropanoids, phenylethanoids, flavonoids, hydroxybenzoic acids, and catechins in aqueous-ethanol extracts of 6-year-old cultivated plants of Rhodiola rosea (propagated in vitro) of Altai Mountain origin were analyzed, and differences in chemical composition among plant specimens and between plant parts (rhizome and root) were evaluated. High-performance liquid chromatography detected 13 phenolic compounds. Roots contained 1.28 times higher phenylethanoids levels (1273.72 mg/100 g) than rhizomes did. Overall, the concentration of phenylethanoids in underground organs was not high and ranged from 21.36 to 103.00 mg/100 g. High variation among R. rosea individual plants was noted both in growth characteristics and in levels of secondary metabolites under our cultivation conditions. It was found that concentrations of phenylpropanoids, phenylethanoids, and catechins significantly depend on the plant part analyzed (p ≤ 0.05). Specimen No. 4 is characterized by the highest concentration of rosavins (1230.99 mg/plant) and the lowest concentration of cinnamyl alcohol (62.87 mg/plant). Despite the wide range of values, all 10 tested specimens (underground part) met the minimum requirements of the United States Pharmacopeia (2015) for rosavins (0.3%) and of the Russia State Pharmacopoeia (2015) for the average level of rosavins (roots): (1%).

Retrospective analysis of dissemination of the 2.MED1 phylogenetic branch of Yersinia pestis in the Caucasus.

The 2.MED1 phylogenetic branch of Yersinia pestis of the medieval biovar became widespread in the Caspian Sea region, the Caucasus, and the Northern Aral Sea region in the 20th century, causing outbreaks and epizootics of plague there. Some of the formed natural foci of 2.MED1 still show epizootic activity and retain their epidemic potential. In this work, we carried out a phylogenetic analysis of 46 Y. pestis strains of the medieval biovar isolated in the Caucasus, the Caspian Sea, and the Northern Aral Sea regions during epidemic outbreaks and epizootics from 1922-2014. The obtained phylogenetic data, together with epidemiological and epizootological data accumulated over a period of about a hundred years, indicate the presence of two waves of penetration of the 2.MED1 branch into the Caucasus. The first occurred, apparently, in the first half of the 20th century as a result of the penetration of 2.MED1 from the foci of the Northern and North-Western Caspian Sea. The second wave was caused by the spread of 2.MED1 from the Northern Aral to the foci of the North-Western, Northern and Eastern Caspian Sea regions at the beginning of the second half of the 20th century, followed by introduction into the Pre-Caucasus and Transcaucasia. The rapid spread of 2.MED1 could be associated with the transfer of the pathogen by land and sea transport in the process of economic activity of the population.

The Influence of Solid and Liquid Systems In Vitro on the Growth and Biosynthetic Characteristics of Microshoot Culture of Spiraea betulifolia ssp. aemiliana.

The paper focuses on the growth dynamics and biosynthetic characteristics of the microshoot culture of Spiraea betulifolia ssp. aemiliana obtained in vitro in agar-solidified and liquid media. Microshoots cultured in either type of media showed similar growth dynamics. The most active culture growth was observed from day 35 to day 60. A comparative analysis of the contents of flavonoids and phenol carboxylic acids showed a higher level of phenol carboxylic acids (5.3-6.84%) and a stronger 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity (half-maximal inhibitory concentration: 341 µg/mL) in S. betulifolia ssp. aemiliana microshoots grown in the liquid medium compared to the microshoots cultured in the solid medium. The flavonoid content of the cultured microshoot did not depend on the consistency of the medium. High-performance liquid chromatography (HPLC) was employed to study the profile and levels of phenolic compounds in microshoots, intact plants, and ex vitro-acclimated S. betulifolia ssp. aemiliana plants. The concentration of kaempferol glycosides was found to be higher in microshoots (1.33% in the solid medium, 1.06% in the liquid medium) compared to intact plants and ex vitro-acclimated plants. Thus, the microshoots of S. betulifolia ssp. aemiliana cultured in the liquid medium rapidly increase their biomass and are an inexpensive promising source of biologically active antioxidant substances, mainly phenol carboxylic acids and kaempferol glycosides.

LC-HRMS for the Identification of Quercetin and Its Derivatives in Spiraea hypericifolia (Rosaceae) and Anatomical Features of Its Leaves.

Spiraea hypericifolia L. is affiliated with the section Chamaedryon Ser. of the genus Spiraea L. (Rosaceae). Similar to many other Spiraea species, S. hypericifolia most often accumulates flavonols among other flavonoids, in particular quercetin and its derivatives. An ethanol-water extract from the aerial part of S. hypericifolia collected in the vicinity of the Ilyichovo settlement (Krasnoyarsk Krai, Russia) was analyzed by liquid chromatography with high-resolution mass spectrometry. Primary and secondary metabolites were found in the extract; structural interpretation consistent with quercetin and its derivatives was proposed for 10 of them. Major compounds were various glycosides of quercetin containing glucose (four compounds), galactose (one compound), xylose (two compounds), arabinose (one compound), or rutinose (one compound) as a carbohydrate residue. Isorhamnetin and 3-O-methylquercetin-3'-O-ß-D-glucopyranoside were identified among methyl-containing compounds. The latter compound and reynoutrin, rhamnetin-3-O-ß-D-xylopyranosyl-ß-D-glucopyranoside, and quercetin-3-O-(6″-O-malonyl)-ß-D-glucoside have not been previously found in S. hypericifolia. Data on the presence of quercetin and its derivatives in the extract of S. hypericifolia expand the understanding of the possible practical use of this plant. In addition, the microscopic features of S. hypericifolia leaves were studied. The diagnostic features of the leaf blade necessary for the authentication of raw materials were revealed: straight-walled epidermis cells, stomata located on both sides of the leaf blade (amphistomatic type), two types of trichomes, and wrinkled cuticula with nodi. The main anatomical diagnostic features of the leaves of S. hypericifolia were determined, which makes it possible to assess the authenticity of the raw material.

Synthesis of Aromatic Polyimides Based on 3,4'-Oxydianiline by One-Pot Polycondensation in Molten Benzoic Acid and Their Application as Membrane Materials for Pervaporation.

A series of aromatic polyimides based on the asymmetrical diamine 3,4'-oxydianiline and various tetracarboxylic acid dianhydrides, both "rigid" and "flexible" structure, have been synthesized using the original method of one-pot high-temperature catalytic polycondensation in molten benzoic acid. The synthesized polyimides were investigated using fourier-transform infrared (FTIR) and 1H NMR spectroscopy, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA) and wide-angle X-ray scattering (WAXS). It was found that the synthesized polyimides, depending on the used dianhydride, are characterized by different solubility in organic solvent and molten benzoic acid, molecular weight, glass transition temperature (Tg) from 198 to 270 °C, an amorphous or semi crystalline structure with the degree of crystallinity from 41 to 52%. The influence of the method of synthesis on the formation of the crystalline phase of polyimides was studied, and the obtained results were compared with the literature data. The effect of dianhydride chemical structure on the performance of polyimide in pervaporation more specifically, dehydratation of azeotropic isopropanol solution was investigated and compared with the commercially available polyetherimide Ultem 1000™. Membrane structure was studied using scanning electron microscopy. It was found that polyimide PI-DA is the most effective for separation of 88 wt.% isopropanol/12 wt.% water mixture compared to the polyimide PI-6FDA and commercial polyetherimide Ultem 1000™ demonstrating normalized permeation flux of 2.77 kg µm m-2 h-1 and separation factor of 264 (water content in permeate 97 wt.%).

Photonuclear Alchemy: Obtaining Medical Isotopes of Gold from Mercury Irradiated on Electron Accelerators.

In our work, the photonuclear production of 198,199Au isotopes for nuclear medicine purposes was studied, and a method for their recovery from irradiated mercury was developed. The yields of the corresponding nuclear reactions were determined, and a comparison of various methods of obtaining gold radioisotopes was provided. New sorbents based on benzo-15-crown-5, which selectively binds gold, were studied, and the optimal conditions for Au recovery with a high degree of purification from mercury were found. It was established that, for the fast and quantitative recovery of Au isotopes, it was necessary to add at least 0.1 mg of the carrier. As a result, the developed method can be regularly used to obtain 198,199Au for the research of radiopharmaceuticals based on them.

Recovery of 177Lu from Irradiated HfO2 Targets for Nuclear Medicine Purposes.

A new method of production of one of the most widely used isotopes in nuclear medicine, 177Lu, with high chemical purity was developed; this method includes irradiation of the HfO2 target with bremsstrahlung photons. The irradiated target was dissolved in HF and then diluted and placed onto a column filled with LN resin. Quantitative sorption of 177Lu could be observed during this process. The column later was rinsed with the mixture of 0.1 M HF and 1 M HNO3 and then 2 M HNO3 to remove impurities. Quantitative desorption of 177Lu was achieved by using 6 M HNO3. The developed method of 177Lu production ensures high purification of this isotope from macroquantities of hafnium and zirconium and radioactive impurities of carrier-free yttrium. The content of 177mLu in 177Lu in photonuclear production was determined. Due to high chemical and radionuclide purity, 177Lu obtained by the developed method can be used in nuclear medicine.

Yields of Photo-Proton Reactions on Nuclei of Nickel and Separation of Cobalt Isotopes from Irradiated Targets.

Nowadays, cobalt isotopes 55Co, 57Co, and 58mCo are considered to be promising radionuclides in nuclear medicine, with 55Co receiving the most attention as an isotope for diagnostics by positron emission tomography. One of the current research directions is dedicated to its production using electron accelerators (via photonuclear method). In our work, the yields of nuclear reactions occurring during the irradiation of natNi and 60Ni by bremsstrahlung photons with energy up to 55 MeV were determined. A method of fast and simple cobalt isotopes separation from irradiated targets using extraction chromatography was developed.

Identification of Flavonoids in the Leaves of Eranthis longistipitata (Ranunculaceae) by Liquid Chromatography with High-Resolution Mass Spectrometry (LC-HRMS).

Eranthis longistipitata Regel is an endemic plant of Central Asia. The flavonoid profile of E. longistipitata leaves was studied by mass spectrometry for the first time (natural populations of Kyrgyzstan and Uzbekistan, in 70% aqueous-ethanol extracts by liquid chromatography coupled with high-resolution mass spectrometry). Mass spectrometry revealed 18 flavonoid compounds. Flavonols featured the highest diversity, and 10 such substances were identified: 2 free aglycones (quercetin and kaempferol), 6 quercetin glycosides (peltatoside, hyperoside, reynoutrin, quercetin 3-sambubioside, rutin, and isoquercitrin), and 2 kaempferol glycosides (juglalin and trifolin). Two flavans (cianidanol and auriculoside), two hydroxyflavanones (6-methoxytaxifolin and aromadendrin), and one C-glycoside flavone-carlinoside-were identified. Dihydroxychalcones aspalathin, phloridzin, and phloretin were found too. Levels of rutin, quercetin, kaempferol, and hyperoside were confirmed by means of standards and high-performance liquid chromatography. Rutin concentration was the highest among all other identified flavonoid compounds: in the leaf samples from Kyrgyzstan, it ranged from 2.46 to 3.20 mg/g, and in those from Uzbekistan, from 1.50 to 3.01 mg/g. The diversity of flavonoid compounds in E. longistipitata leaves is probably due to external ecological and geographic factors and adaptive mechanisms.

Typification and Taxonomic Remarks on Names of Iris (Iridaceae) Associated with the Turkish Flora.

In view of the forthcoming review of Turkish irises for Resimli Türkiye Florasi (The Illustrated Flora of Turkey), nineteen names are typified or nomenclatural remarks are provided in the present report. Lectotypes are designated for Iris aschersonii, I. attica, I. bornmuelleri, I. purpureobractea (a taxonomic synonym of I. junonia), I. reticulata var. cyanea, I. reticulata var. sophenensis, I. suaveolens and I. taochia. The second-step lectotypification is made for I. histrio. Neotypes are designated for the names I. histrioides, I. junonia, I. masiae and I. reticulata var. histrioides; epitype, for the name I. reticulata var. sophenensis. For the previously typified names, I. bakeriana, I. musulmanica and I. reticulata, lectotypes are given. The lectotypes for I. histrio var. aintabensis, I. schachtii, and Xiphion danfordiae and the authorship for I. histrioides, are corrected. Images are provided for eight specimens selected as types that are not available online. Notes on distribution in Turkey are provided for all the accepted taxa.

Plasma Treatment of Poly(ethylene terephthalate) Films and Chitosan Deposition: DC- vs. AC-Discharge.

Plasma treatment is one of the most promising tools to control surface properties of materials tailored for biomedical application. Among a variety of processing conditions, such as the nature of the working gas and time of treatment, discharge type is rarely studied, because it is mainly fixed by equipment used. This study aimed to investigate the effect of discharge type (direct vs. alternated current) using air as the working gas on plasma treatment of poly(ethylene terephthalate) films, in terms of their surface chemical structure, morphology and properties using X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and contact angle measurements. The effect of the observed changes in terms of subsequent chitosan immobilization on plasma-treated films was also evaluated. The ability of native, plasma-treated and chitosan-coated films to support adhesion and growth of mesenchymal stem cells was studied to determine the practicability of this approach for the biomedical application of poly(ethylene terephthalate) films.

Yersinia pestis strains of ancient phylogenetic branch 0.ANT are widely spread in the high-mountain plague foci of Kyrgyzstan.

Fifty six Yersinia pestis strains, isolated over the period of more than 50 years in three high-mountain foci of Kyrgyzstan (Tien Shan, Alai, and Talas), have been characterized by means of PCR and single nucleotide polymorphism (SNP) typing methods. Seven of these strains were also characterized by means of whole genome sequencing and genome-wide SNP phylogenetic analysis. It was found that forty two strains belong to 0.ANT2, 0.ANT3 and 0.ANT5 phylogenetic branches. From these, strains of 0.ANT2 and 0.ANT3 branches were earlier detected in China only, whereas 0.ANT5 phylogenetic branch was identified for Y. pestis phylogeny for the first time. According to the results of genome-wide SNP analysis, 0.ANT5 strains are ones of the most closely related to Y. pestis strain responsible for the Justinianic Plague. We have also found out that four of the studied strains belong to the phylogenetic branch 2.MED1, and ten strains from Talas high-mountain focus belong to the phylogenetic branch 0.PE4 (sub-branch 0.PE4t). Established diversity of Y. pestis strains and extensive dissemination of the strains pertaining to the 0.ANT branch confirm the antiquity of the mentioned above plague foci and suggest that strains of the 0.ANT branch, which serve as precursors for all highly virulent Y. pestis strains, had their origin in the Tien Shan mountains.

Structural model for dry-drawing of sheets and yarns from carbon nanotube forests.

A structural model is developed for describing the solid-state transformation of a vertically oriented carbon multiwall nanotube (MWNT) forest to a horizontally oriented MWNT sheet or yarn. The key element of our model is a network of individual carbon nanotubes or small bundles interconnecting the array of main large-diameter MWNT bundles of the forest. The dry-draw self-assembly mechanism for MWNT sheet formation involves two principal processes that reconfigure the interconnection network: (1) unzipping by preferentially peeling off interconnections between the bundles in the forest and (2) self-strengthening of these interconnections by densification at the top and bottom of the forest during draw-induced reorientation of the bundles. It is shown that interconnection density is a key parameter that determines the ability of a MWNT forest to be dry-drawable into sheets and yarns. This model describes the principal mechanism of solid-state draw (confirmed by dynamic in situ scanning electron microscopy), the range of forest structural parameters that enable sheet draw, and observed dependencies of sheet properties on the parent MWNT forest structure.

Giant-stroke, superelastic carbon nanotube aerogel muscles.

Improved electrically powered artificial muscles are needed for generating force, moving objects, and accomplishing work. Carbon nanotube aerogel sheets are the sole component of new artificial muscles that provide giant elongations and elongation rates of 220% and (3.7 x 10(4))% per second, respectively, at operating temperatures from 80 to 1900 kelvin. These solid-state-fabricated sheets are enthalpic rubbers having gaslike density and specific strength in one direction higher than those of steel plate. Actuation decreases nanotube aerogel density and can be permanently frozen for such device applications as transparent electrodes. Poisson's ratios reach 15, a factor of 30 higher than for conventional rubbers. These giant Poisson's ratios explain the observed opposite sign of width and length actuation and result in rare properties: negative linear compressibility and stretch densification.