Synthesis and functionalities of FeSn12 superatom prepared by single atom introduction with a dendrimer template.

Superatoms are promising as new building block materials that can be designed by precise controlling of the constituent atoms. Stannaspherene (Sn12 2-) is a rigid cage-like cluster with icosahedral symmetry, for which one-atom encapsulation was theoretically expected and detected in the gas phase. Here, a single-atom introduction method into stannaspherene using a dendrimer template with polyvinylpyrrolidone (PVP) protection is demonstrated. This advanced solution-phase synthesis allows not only the selective doping of one atom into the cluster cage, but also enable further detail characterization of optical and magnetic properties that were not possible in the gas-phase synthesis. In other words, this liquid-phase synthesis method has enabled the adaptation of detailed analytical methods. In this study, FeSn12 was synthesized and characterized, revealing that a single Fe atom introduction in the Sn12 2- cage result in the appearance of near-infrared emission and enhancement in the magnetism.

Alloying at a Subnanoscale Maximizes the Synergistic Effect on the Electrocatalytic Hydrogen Evolution.

Bonding dissimilar elements to provide synergistic effects is an effective way to improve the performance of metal catalysts. However, as the properties become more dissimilar, achieving synergistic effects effectively becomes more difficult due to phase separation. Here we describe a comprehensive study on how subnanoscale alloying is always effective for inter-elemental synergy. Thirty-six combinations of both bimetallic subnanoparticles (SNPs) and nanoparticles (NPs) were studied systematically using atomic-resolution imaging and catalyst benchmarking based on the hydrogen evolution reaction (HER). Results revealed that SNPs always produce greater synergistic effects than NPs, the greatest synergistic effect was found for the combination of Pt and Zr. The atomic-scale miscibility and the associated modulation of electronic states at the subnanoscale were much different from those at the nanoscale, which was observed by annular-dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray photoelectron spectroscopy (XPS), respectively.

Development of Highly Sensitive Raman Spectroscopy for Subnano and Single-Atom Detection.

Direct detection and characterisation of small materials are fundamental challenges in analytical chemistry. A particle composed of dozens of metallic atoms, a so-called subnano-particle (SNP), and a single-atom catalyst (SAC) are ultimate analysis targets in terms of size, and the topic is now attracting increasing attention as innovative frontier materials in catalysis science. However, characterisation techniques for the SNP and SAC adsorbed on substrates requires sophisticated and large-scale analytical facilities. Here we demonstrate the development of an ultrasensitive, laboratory-scale, vibrational spectroscopic technique to characterise SNPs and SACs. The fine design of nano-spatial local enhancement fields generated by the introduction of anisotropic stellate-shaped signal amplifiers expands the accessibility of small targets on substrates into evanescent electromagnetic fields, achieving not only the detection of isolated small targets but also revealing the effects of intermolecular/interatomic interactions within the subnano configuration under actual experimental conditions. Such a development of "in situ subnano spectroscopy" will facilitate a comprehensive understanding of subnano and SAC science.

Quantum Materials Exploration by Sequential Screening Technique of Heteroatomicity.

Subnanoparticles (SNPs) exhibit unique properties and functions due to their extremely small particle sizes which extend into the quantum scale. Although the synthesis of SNPs requiring precise control of atomicity and composition has not been accomplished, we recently developed an atom-hybridization method (AHM) that realizes such atomic-level control using a macromolecular template. As a next step in the quest for innovative quantum materials, the practical creation of functional subnanomaterials will become a central subject. In this study, we established a new screening technique for functional SNPs by focusing on the simple indium-tin binary system with sequential compositions using the latest AHM. As a result, it was revealed that a thermodynamically unstable indium species was produced only at a certain composition leading to a durable luminescent function. Such a phenomenon in subnanosized substances will play an important role in the development of the as-yet-unknown field of quantum materials.

An aromatic micelle with bent pentacene-based panels: encapsulation of perylene bisimide dyes and graphene nanosheets.

For exploitation of a new class of aromatic micelles, we synthesized a bent pentacene-based amphiphilic molecule through Diels-Alder reaction. The amphiphiles bearing two trimethylammonium tethers assemble into a spherical aromatic micelle, with an average core diameter of 1.5 nm, in water at room temperature. The new aromatic micelle efficiently encapsulates perylene bisimide (PBI) dyes and graphene nanosheets (GNS) in water. The encapsulated PBI dyes form a parallel stacked dimer, exhibiting characteristic absorption and emission bands. In addition, the encapsulated GNS are composed of few-layer graphene sheets with an average lateral size of ∼7 nm, as confirmed by Raman spectroscopy. The resultant, aqueous host-guest complexes are stable even after three weeks in water under ambient conditions.

Tin oxide subnanoparticles: a precisely-controlled synthesis, subnano-detection for their detailed characterisation and applications.

Subnanometric metal particles exhibit anomalous chemical activity, suggesting innovative applications as next-generation materials. However, a precise synthesis and detailed characterisation of these subnano-materials remain a major challenge. Here we summarise recent works on the synthesis of size-controlled tin (Sn) oxide subnanoparticles (SNPs) using the dendrimer template method, and on their detailed characterisation. Size-controlled Sn oxide SNPs (Sn12, Sn28 and Sn60) have been synthesised and they showed a size-dependent compositional change containing not only stable Sn(iv) states but also metastable Sn(ii) states so as to form subnano-scaled particle shapes. Detailed vibrational characterisation of SNPs was achieved by employing subnano-sensitive Raman spectroscopy for spectroscopic characterisation. Combined with density functional theory studies, the inherent subnano-structures of Sn oxide SNPs have been elucidated for the first time. Furthermore, the size-dependent activity of Sn oxide SNPs upon CO oxidation was rationally explained from the simulated structure of Sn oxide SNPs. A detailed understanding of the chemical and physical nature of subnano-materials facilitates the rational design of SNPs for practical applications such as catalysis, biosensors, and electronics.

Ultrahigh sensitive Raman spectroscopy for subnanoscience: Direct observation of tin oxide clusters.

Subnanometric metal clusters exhibit anomalous catalytic activity, suggesting innovative applications as next-generation materials, although identifying and characterizing these subnanomaterials in atomic detail remains a substantial challenge because of the severely weak signal intensity for the conventional analytical methods. Here, we report a subnanosensitive vibrational technique established based on the surface-enhanced Raman spectroscopy, demonstrating the first-ever detailed vibrational characterization of subnanomaterials. Furthermore, combining with density functional theory calculations, we reveal that inherent surface structures of the tin oxide subnanoclusters determine the size-specific spectral and catalytic characteristics of these clusters. The high-sensitivity characterization methodology elaborated here can provide a comprehensive understanding of the chemical and structural natures of subnanomaterials, which facilitate the rational design of subnanomaterials on the atomic scale for practical applications, such as in catalysts, biosensors, and electronics.

Solution Phase Mass Synthesis of 2D Atomic Layer with Hexagonal Boron Network.

Borophene and the analogs are attractive 2D-materials showing unique mechanical and electronic properties. In this study, the bottom-up synthesis of an atomic boron network possessing a completely planar skeleton was achieved from KBH4. The borophene-analog was stabilized by oxygen atoms positioned on the same plane, providing holes and the anionic state of the layer. Potassium cations between the layers enabled crystalline stacking of the layers, as well as dissolution in solvents as atomically thin layers. The conductivity measurements revealed the electronic feature. Unlike the interplane conducting property, almost zero activation energy like a metal was suggested from the in-plane measurement.

Periodicity of molecular clusters based on symmetry-adapted orbital model.

The periodic table has always contributed to the discovery of a number of elements. Is there no such principle for larger-scale substances than atoms? Many stable substances such as clusters have been predicted based on the jellium model, which usually assumes that their structures are approximately spherical. The jellium model is effective to explain subglobular clusters such as icosahedral clusters. To broaden the scope of this model, we propose the symmetry-adapted orbital model, which explicitly takes into account the level splittings of the electronic orbitals due to lower structural symmetries. This refinement indicates the possibility of an abundance of stable clusters with various shapes that obey a certain periodicity. Many existing substances are also governed by the same rule. Consequently, all substances with the same symmetry can be unified into a periodic framework in analogy to the periodic table of elements, which will act as a useful compass to find missing substances.

Nanomaterials design for super-degenerate electronic state beyond the limit of geometrical symmetry.

Spherical atoms have the highest geometrical symmetry. Due to this symmetry, atomic orbitals are highly degenerate, leading to closed-shell stability and magnetism. No substances with greater degrees of degeneracy are known, due to geometrical limitations. We now propose that realistic magnesium, zinc, and cadmium clusters having a specific tetrahedral framework possess anomalous higher-fold degeneracies than spherical symmetry. Combining density functional theory calculations with simple tight-binding models, we demonstrate that these degeneracies can be attributed to dynamical symmetry. The degeneracy condition is fully identified as an elegant mathematical sequence involving interatomic parameters. The introduction of dynamical symmetry will lead to the discovery of a novel category of substances with super-degenerate orbitals.

Exact mass analysis of sulfur clusters upon encapsulation by a polyaromatic capsular matrix.

Structural determination of inorganic clusters relies heavily on mass spectrometry because of, in most cases, their poor responsivities toward nuclear magnetic resonance, ultraviolet/visible, and infrared analyses. Nevertheless, mass spectrometry analysis of oligosulfurs (S n ), which are unique clusters with copious allotropic forms, usually displays their fragment peaks. Here we report that a polyaromatic capsule acts as a supramolecular matrix for the mass determination of the neutral sulfur clusters. Upon encapsulation, molecular ion peaks derived from the host-guest complexes including cyclic S6 and S8 clusters are exclusively detected by common electrospray ionization time-of-flight mass spectrometry analysis. Furthermore, mass spectrometry analysis of a cyclic S12 cluster, which is in situ prepared from two S6 clusters within the matrix upon light irradiation, is achieved by the same way. The present matrix can remarkably stabilize the otherwise labile S6 and S12 clusters in the polyaromatic shell not only under mass spectrometry conditions but also in an ambient solution state.The structures of inorganic clusters are commonly characterized by mass spectrometry (MS), but neutral sulfur clusters heavily fragment under MS conditions, preventing their exact mass determination. Here, the authors successfully perform MS on labile cyclic sulfur clusters by stabilizing them within ionic supramolecular capsules.

Stable anchoring chemistry for room temperature charge transport through graphite-molecule contacts.

An open challenge for single-molecule electronics is to find stable contacts at room temperature with a well-defined conductance. Common coinage metal electrodes pose fabrication and operational problems due to the high mobility of the surface atoms. We demonstrate how molecules covalently grafted onto mechanically robust graphite/graphene substrates overcome these limitations. To this aim, we explore the effect of the anchoring group chemistry on the charge transport properties of graphite-molecule contacts by means of the scanning tunneling microscopy break-junction technique and ab initio simulations. Molecules adsorbed on graphite only via van der Waals interactions have a conductance that decreases exponentially upon stretching the junctions, whereas the molecules bonded covalently to graphite have a single well-defined conductance and yield contacts of unprecedented stability at room temperature. Our results demonstrate a strong bias dependence of the single-molecule conductance, which varies over more than one order of magnitude even at low bias voltages, and show an opposite rectification behavior for covalent and noncovalent contacts. We demonstrate that this bias-dependent conductance and opposite rectification behavior is due to a novel effect caused by the nonconstant, highly dispersive density of states of graphite around the Fermi energy and that the direction of rectification is governed by the detailed nature of the molecule/graphite contact. Combined with the prospect of new functionalities due to a strongly bias-dependent conductance, these covalent contacts are ideal candidates for next-generation molecular electronic devices.

Layer-by-layer grown scalable redox-active ruthenium-based molecular multilayer thin films for electrochemical applications and beyond.

Here we report the first study on the electrochemical energy storage application of a surface-immobilized ruthenium complex multilayer thin film with anion storage capability. We employed a novel dinuclear ruthenium complex with tetrapodal anchoring groups to build well-ordered redox-active multilayer coatings on an indium tin oxide (ITO) surface using a layer-by-layer self-assembly process. Cyclic voltammetry (CV), UV-Visible (UV-Vis) and Raman spectroscopy showed a linear increase of peak current, absorbance and Raman intensities, respectively with the number of layers. These results indicate the formation of well-ordered multilayers of the ruthenium complex on ITO, which is further supported by the X-ray photoelectron spectroscopy analysis. The thickness of the layers can be controlled with nanometer precision. In particular, the thickest layer studied (65 molecular layers and approx. 120 nm thick) demonstrated fast electrochemical oxidation/reduction, indicating a very low attenuation of the charge transfer within the multilayer. In situ-UV-Vis and resonance Raman spectroscopy results demonstrated the reversible electrochromic/redox behavior of the ruthenium complex multilayered films on ITO with respect to the electrode potential, which is an ideal prerequisite for e.g. smart electrochemical energy storage applications. Galvanostatic charge-discharge experiments demonstrated a pseudocapacitor behavior of the multilayer film with a good specific capacitance of 92.2 F g(-1) at a current density of 10 µA cm(-2) and an excellent cycling stability. As demonstrated in our prototypical experiments, the fine control of physicochemical properties at nanometer scale, relatively good stability of layers under ambient conditions makes the multilayer coatings of this type an excellent material for e.g. electrochemical energy storage, as interlayers in inverted bulk heterojunction solar cell applications and as functional components in molecular electronics applications.

Exploitation of desilylation chemistry in tailor-made functionalization on diverse surfaces.

Interface engineering to attain a uniform and compact self-assembled monolayer at atomically flat surfaces plays a crucial role in the bottom-up fabrication of organic molecular devices. Here we report a promising and operationally simple approach for modification/functionalization not only at ultraflat single-crystal metal surfaces, M(111) (M=Au, Pt, Pd, Rh and Ir) but also at the highly oriented pyrolytic graphite surface, upon efficient in situ cleavage of trimethylsilyl end groups of the molecules. The obtained self-assembled monolayers are ultrastable within a wide potential window. The carbon-surface bonding on various substrates is confirmed by shell-isolated nanoparticle-enhanced Raman spectroscopy. Application of this strategy in tuning surface wettability is also demonstrated. The most valuable finding is that a combination of the desilylation with the click chemistry represents an efficient method for covalent and tailor-made functionalization of diverse surfaces.

Electrochemical CO2 Reduction - A Critical View on Fundamentals, Materials and Applications.

The electrochemical reduction of CO(2) has been extensively studied over the past decades. Nevertheless, this topic has been tackled so far only by using a very fundamental approach and mostly by trying to improve kinetics and selectivities toward specific products in half-cell configurations and liquid-based electrolytes. The main drawback of this approach is that, due to the low solubility of CO(2) in water, the maximum CO(2) reduction current which could be drawn falls in the range of 0.01-0.02 A cm(-2). This is at least an order of magnitude lower current density than the requirement to make CO(2)-electrolysis a technically and economically feasible option for transformation of CO(2) into chemical feedstock or fuel thereby closing the CO(2) cycle. This work attempts to give a short overview on the status of electrochemical CO(2) reduction with respect to challenges at the electrolysis cell as well as at the catalyst level. We will critically discuss possible pathways to increase both operating current density and conversion efficiency in order to close the gap with established energy conversion technologies.

A severe reduction in the cytochrome C content of Geobacter sulfurreducens eliminates its capacity for extracellular electron transfer.

The ability of Geobacter species to transfer electrons outside the cell enables them to play an important role in a number of biogeochemical and bioenergy processes. Gene deletion studies have implicated periplasmic and outer-surface c-type cytochromes in this extracellular electron transfer. However, even when as many as five c-type cytochrome genes have been deleted, some capacity for extracellular electron transfer remains. In order to evaluate the role of c-type cytochromes in extracellular electron transfer, Geobacter sulfurreducens was grown in a low-iron medium that included the iron chelator (2,2'-bipyridine) to further sequester iron. Haem-staining revealed that the cytochrome content of cells grown in this manner was 15-fold lower than in cells exposed to a standard iron-containing medium. The low cytochrome abundance was confirmed by in situ nanoparticle-enhanced Raman spectroscopy (NERS). The cytochrome-depleted cells reduced fumarate to succinate as well as the cytochrome-replete cells do, but were unable to reduce Fe(III) citrate or to exchange electrons with a graphite electrode. These results demonstrate that c-type cytochromes are essential for extracellular electron transfer by G. sulfurreducens. The strategy for growing cytochrome-depleted G. sulfurreducens will also greatly aid future physiological studies of Geobacter species and other microorganisms capable of extracellular electron transfer.

An in situ surface electrochemistry approach towards whole-cell studies: the structure and reactivity of a Geobacter sulfurreducens submonolayer on electrified metal/electrolyte interfaces.

A direct electron transfer process between bacterial cells of electrogenic species Geobacter sulfurreducens (Gs) and electrified electrode surfaces was studied to exploit the reactivity of Gs submonolayers on gold and silver surfaces. A submonolayer of Gs was prepared and studied to explore specifically the heterogeneous electron transfer properties at the bacteria/electrode interface. In situ microscopic techniques characterised the morphology of the Gs submonolayers under the operating conditions. In addition, complementary in situ spectroscopic techniques that allowed us to access in situ molecular information of the Gs with high surface selectivity and sensitivity were employed. The results provided clear evidence that the outermost cytochrome C in Gs is responsible for the heterogeneous electron transfer, which is in direct contact with the metal electrode. Feasibility of single cell in situ studies under operating conditions was demonstrated where the combination of surface-electrochemical tools at the nano- and micro-scale with microbiological approaches can offer unique opportunities for the emerging field of electro-microbiology to explore processes and interactions between microorganisms and electrical devices.

Water at interfaces.

Electrolyte cations and anions in aqueous solutions are hydrogen bond breaker. We found that most of anions are strong hydrogen bond breaker whereas cations are not. Further, the electro-reduction of Mg(H2O)6(2+) to Mg(OH)2 and the growth of the Mg(OH)2 were observed on Au electrode surface at negative electrode potential. Water molecules in an electric double layer exhibit an ordered and a disordered structure at negative and pzc (point of zero charge) potentials, respectively. Therefore, electrode potential polarization (negative or pzc potential application) from an equilibrium potential operates an electrified interface to cause increased or decreased ordering, orientation and charge transfer of water molecules as well as dissociation of water on the electrode surface.

Methanol oxidation on a Pt(111)-OH/O surface.

The methanol oxidation on a hydroxylated Pt (Pt(111)-OH) surface has been investigated by means of infrared reflection absorption spectroscopy (IRAS) in ultra-high vacuum (UHV) and in acidic solution. The Pt(111)-OH surface in UHV was prepared by introducing water molecules on a Pt(111)-(2 x 2)-O surface and annealed at temperature higher than 160 K. Methanol was then, introduced to the Pt(111)-OH surface to show the dependence of the reaction intermediate on the annealing temperature. At an annealing temperature below 160 K, IR bands assignable to methanol overlayer were observed and no detectable intermediates, such as CO, formaldehyde and formate, were formed, suggesting that methanol molecules remain stable on Pt(111) surface without dissociation at this temperature region. At an annealing temperature above 160 K, on the other hand, CO and formate were observed. In addition, the oxidation of CO on Pt(111)-OH showed no sign of formate formation, indicating that formate is not derived from CO, but from a direct oxidation of methanol. Methanol oxidation was carried out in 0.1 mol dm(-3) HClO(4) solution on Pt(111) with a flow cell configuration and showed the formation of formate. These results indicate that the formate is the dominant non-CO intermediate both in UHV and in acidic solution, and the preadsorbed oxygen-containing species, in particular OH adsorbates, on Pt(111) surface plays a very important role in the formate formation process in methanol oxidation reaction.

Electrochemical reactivity in nanoscale domains: O2 reduction on a fullerene modified gold surface.

Fullerene is strongly adsorbed on both single crystal and polycrystalline gold surfaces and its specific adsorption resulted in the formation of high coverage large hexagonal rafts with strong interactions between the adsorbed fullerene molecules and the Au substrate. The oxygen reduction reaction (ORR) was investigated on these surfaces to determine their influence on the reduction mechanism. Oxygen reduction did not take place on the fullerene overlayer but proceeded on the sub-nanometer sized exposed pockets of the underlying Au substrate. Reduction at these confined sites produces hydrogen peroxide selectively. This effect is ascribed to the blocking action, or so-called "third body effect", of the adsorbed fullerene molecules, which do not display electrocatalytic properties for oxygen reduction.