Photoluminescence of Two-Dimensional MoS2 Nanosheets Produced by Liquid Exfoliation.

Extraordinary properties of two-dimensional materials make them attractive for applications in different fields. One of the prospective niches is optical applications, where such types of materials demonstrate extremely sensitive performance and can be used for labeling. However, the optical properties of liquid-exfoliated 2D materials need to be analyzed. The purpose of this work is to study the absorption and luminescent properties of MoS2 exfoliated in the presence of sodium cholate, which is the most often used surfactant. Ultrasound bath and mixer-assisted exfoliation in water and dimethyl sulfoxide were used. The best quality of MoS2 nanosheets was achieved using shear-assisted liquid-phase exfoliation as a production method and sodium cholate (SC) as a surfactant. The photoluminescent properties of MoS2 nanosheets varied slightly when changing the surfactant concentrations in the range C(SC) = 0.5-2.5 mg/mL. This work is of high practical importance for further enhancement of MoS2 photoluminescent properties via chemical functionalization.

Optoelectronic and Optomechanical Properties of Few-Atomic-Layer Black Phosphorus Nanoflakes as Revealed by In Situ TEM.

The optoelectronic signatures of free-standing few-atomic-layer black phosphorus nanoflakes are analyzed by in situ transmission electron microscopy (TEM). As compared to other 2D materials, the band gap of black phosphorus (BP) is related directly to multiple thicknesses and can be tuned by nanoflake thickness and strain. The photocurrent measurements with the TEM show a stable response to infrared light illumination and change of nanoflakes band gap with deformation while pressing them between two electrodes assembled in the microscope. The photocurrent spectra of an 8- and a 6-layer BP nanoflake samples are comparatively measured. Density functional theory (DFT) calculations are performed to identify the band structure changes of BP during deformations. The results should help to find the best pathways for BP smart band gap engineering via tuning the number of material atomic layers and programmed deformations to promote future optoelectronic applications.

Thermal and Electrical Properties of Additively Manufactured Polymer-Boron Nitride Composite.

The efficiency of electronic microchip-based devices increases with advancements in technology, while their size decreases. This miniaturization leads to significant overheating of various electronic components, such as power transistors, processors, and power diodes, leading to a reduction in their lifespan and reliability. To address this issue, researchers are exploring the use of materials that offer efficient heat dissipation. One promising material is a polymer-boron nitride composite. This paper focuses on 3D printing using digital light processing of a model of a composite radiator with different boron nitride fillings. The measured absolute values of the thermal conductivity of such a composite in the temperature range of 3-300 K strongly depend on the concentration of boron nitride. Filling the photopolymer with boron nitride leads to a change in the behavior of the volt-current curves, which may be associated with the occurrence of percolation currents during the deposition of boron nitride. The ab initio calculations show the behavior and spatial orientation of BN flakes under the influence of an external electric field at the atomic level. These results demonstrate the potential use of photopolymer-based composite materials filled with boron nitride, which are manufactured using additive techniques, in modern electronics.

Moiré Diamones: New Diamond-like Films of Semifunctionalized Twisted Graphene Layers.

We proposed novel carbon nanostructures based on a twisted few-layered graphene with one side passivated by hydrogen or fluorine: Moiré diamones on graphene. The presence of a dangling bond at the bottom layer of diamones leads to the appearance of spin density localization, which can be tuned by the variation of the twist angle with the following formation of Moiré diamones. The spin-polarized nature of electronic density distribution was obtained and discussed in detail on the basis of ab initio calculations. Such a feature makes Moiré diamones a promising key element in the field of controllable spintronic devices.

Computational Design of Gas Sensors Based on V3S4 Monolayer.

Novel magnetic gas sensors are characterized by extremely high efficiency and low energy consumption, therefore, a search for a two-dimensional material suitable for room temperature magnetic gas sensors is a critical task for modern materials scientists. Here, we computationally discovered a novel ultrathin two-dimensional antiferromagnet V3S4, which, in addition to stability and remarkable electronic properties, demonstrates a great potential to be applied in magnetic gas sensing devices. Quantum-mechanical calculations within the DFT + U approach show the antiferromagnetic ground state of V3S4, which exhibits semiconducting electronic properties with a band gap of 0.36 eV. A study of electronic and magnetic response to the adsorption of various gas agents showed pronounced changes in properties with respect to the adsorption of NH3, NO2, O2, and NO molecules on the surface. The calculated energies of adsorption of these molecules were -1.25, -0.91, -0.59, and -0.93 eV, respectively. Obtained results showed the prospective for V3S4 to be used as effective sensing materials to detect NO2 and NO, for their capture, and for catalytic applications in which it is required to lower the dissociation energy of O2, for example, in oxygen reduction reactions. The sensing and reducing of NO2 and NO have great importance for improving environmental protection and sustainable development.

Tunable Single-Atomic Charges on a Cleaved Intercalated Transition Metal Dichalcogenide.

Control of a single ionic charge state by altering the number of bound electrons has been considered as an ultimate testbed for atomic charge-induced interactions and manipulations, and such subject has been studied in artificially deposited objects on thin insulating layers. We demonstrate that an entire layer of controllable atomic charges on a periodic lattice can be obtained by cleaving metallic Co1/3NbS2, an intercalated transition metal dichalcogenide. We identified a metastable charge state of Co with a different valence and manipulated atomic charges to form a linear chain of the metastable charge state. Density functional theory investigation reveals that the charge state is stable due to a modified crystal field at the surface despite the coupling between NbS2 and Co via a1g orbitals. The idea can be generalized to other combinations of intercalants and base matrices, suggesting that they can be a new platform to explore single-atom-operational 2D electronics/spintronics.

Semiconductor nanochannels in metallic carbon nanotubes by thermomechanical chirality alteration.

Carbon nanotubes have a helical structure wherein the chirality determines whether they are metallic or semiconducting. Using in situ transmission electron microscopy, we applied heating and mechanical strain to alter the local chirality and thereby control the electronic properties of individual single-wall carbon nanotubes. A transition trend toward a larger chiral angle region was observed and explained in terms of orientation-dependent dislocation formation energy. A controlled metal-to-semiconductor transition was realized to create nanotube transistors with a semiconducting nanotube channel covalently bonded between a metallic nanotube source and drain. Additionally, quantum transport at room temperature was demonstrated for the fabricated nanotube transistors with a channel length as short as 2.8 nanometers.

Novel two-dimensional boron oxynitride predicted using the USPEX evolutionary algorithm.

Oxidation is a unique process that significantly changes the structure and properties of a material. Doping of h-BN by oxygen is a hot topic in material science leading to the possibility of synthesis of novel 2D structures with customized electronic properties. It is still unclear how the atomic structure changes in the presence of external atoms during the oxidation of h-BN. We predict novel two-dimensional (2D) arrangements of boron oxynitride using the evolutionary algorithm of crystal structure prediction USPEX. All considered structures demonstrate semiconducting properties with a reduced bandgap compared with h-BN. Both molecular dynamics and phonon calculations show the dynamical stability of the new 2D B5N3O2 phase, and our calculations demonstrate that it can form a bulk layered structure with an interlayer distance larger than that of pure h-BN. The optical characterization shows a redshift of the absorption spectrum compared with pure h-BN. Incorporation of oxygen into the structure of 2D BN during synthesis or oxidation can dramatically change the covalent network of h-BN while preserving its two-dimensionality and flatness, following the presence of local dipole moments which could improve the piezoelectric properties.

Mechanical Engineering Effect in Electronic and Optical Properties of Graphene Nanomeshes.

Here, we present an ab initio study of ways for engineering electronic and optical properties of bilayered graphene nanomeshes with various stacking types via mechanical deformations. Strong evolution of the electronic structure and absorption spectra during deformation is studied and analyzed. The obtained results are of significant importance and open up new prospects for using such nanomeshes as materials with easily controlled properties in electronic and optoelectronic nanodevices.

Induced spin polarization in graphene via interactions with halogen doped MoS2 and MoSe2 monolayers by DFT calculations.

Magnetic halogen doped MoX2 (X = S and Se) monolayers influenced the electronic structure of graphene through a proximity effect. This process was observed using state-of-the-art calculations. It was found that the substitution of a single chalcogen atom with a halogen atom (F, Cl, Br, and I) results in n-type doping of MoX2. An additional electron from the dopant is localized on binding orbitals with the nearest Mo atoms and leads to the formation of magnetism in the dichalcogenide layer. Detailed analysis of halogen doped MoX2/graphene heterostructures demonstrated the induction of spin polarization in graphene near the Fermi energy. Significant spin polarization near the Fermi energy and n-type doping were observed in the graphene layer of MoSe2/graphene heterostructures with MoSe2 doped with iodine. At the same time, fluorine-doped MoSe2 does not cause n-doping in graphene, while spin polarization still takes place. The possibility for the detection of the arrangement of the halogen impurities at the MoX2 basal plane even with the graphene layer deposited on top was demonstrated through STM measurements which will be undoubtedly useful for the fabrication of electronic schemes and elements based on the proposed heterostructures for their further application in nanoelectronics and spintronics.

Young's Modulus and Tensile Strength of Ti3C2 MXene Nanosheets As Revealed by In Situ TEM Probing, AFM Nanomechanical Mapping, and Theoretical Calculations.

Two-dimensional transition metal carbides, that is, MXenes and especially Ti3C2, attract attention due to their excellent combination of properties. Ti3C2 nanosheets could be the material of choice for future flexible electronics, energy storage, and electromechanical nanodevices. There has been limited information available on the mechanical properties of Ti3C2, which is essential for their utilization. We have fabricated Ti3C2 nanosheets and studied their mechanical properties using direct in situ tensile tests inside a transmission electron microscope, quantitative nanomechanical mapping, and theoretical calculations employing machine-learning derived potentials. Young's modulus in the direction perpendicular to the Ti3C2 basal plane was found to be 80-100 GPa. The tensile strength of Ti3C2 nanosheets reached up to 670 MPa for ∼40 nm thin nanoflakes, while a strong dependence of tensile strength on nanosheet thickness was demonstrated. Theoretical calculations allowed us to study mechanical characteristics of Ti3C2 as a function of nanosheet geometrical parameters and structural defect concentration.

Exotic Two-Dimensional Structure: The First Case of Hexagonal NaCl.

NaCl is one of the simplest compounds and was thought to be well-understood, and yet, unexpected complexities related to it were uncovered at high pressure and in low-dimensional states. Here, exotic hexagonal NaCl thin films on the (110) diamond surface were crystallized in the experiment following a theoretical prediction based on ab initio evolutionary algorithm USPEX. State-of-the-art calculations and experiments showed the existence of a hexagonal NaCl thin film, which is due to the strong chemical interaction of the NaCl film with the diamond substrate.

Fluorinated graphene nanoparticles with 1-3 nm electrically active graphene quantum dots.

A new approach to creating a new and locally nanostructured graphene-based material is reported. We studied the electric and structural properties of partially fluorinated graphene (FG) films obtained from an FG-suspension and nanostructured by high-energy Xe ions. Local shock heating in ion tracks is suggested to be the main force driving the changes. It was found that ion irradiation leads to the formation of locally thermally expanded FG and its cracking into nanoparticles with small (∼1.5-3 nm) graphene quantum dots (GQD), embedded in them. The bandgap of GQD was estimated as 1 -1.5 eV. A further developed approach was applied to correct the functional properties of printed FG-based crossbar memristors. Dielectric FG films with small quantum dots may offer prospects in graphene-based electronics due to their stability and promising properties.

Novel Unexpected Reconstructions of (100) and (111) Surfaces of NaCl: Theoretical Prediction.

We have predicted stable reconstructions of the (100) and (111) surfaces of NaCl using the global optimization algorithm USPEX. Several new reconstructions, together with the previously reported ones, are found. For the cleaved bare (100) surface, pure Na and pure Cl are the only stable surface phases. Our study of the (111) surface shows that a newly predicted Na3Cl-(1 × 1) reconstruction is thermodynamically stable in a wide range of chlorine chemical potentials. It has a sawtooth-like profile where each facet reproduces the (100) surface of rock-salt NaCl, hinting on the preferred growth of the (100) surface. We used Bader charge analysis to explain the preferable formation of this sawtooth-like Na3Cl-(1 × 1) reconstruction of the (111) surface of NaCl. We find that at a very high chemical potential of Na, the polar (and normally absent) (111) surface becomes part of the equilibrium crystal morphology. At both very high and very low chemical potentials of Cl, we predict a large decrease of surface energy and fracture toughness (the Rehbinder effect).

Crystallography-Derived Young's Modulus and Tensile Strength of AlN Nanowires as Revealed by in Situ Transmission Electron Microscopy.

Aluminum nitride (AlN) has a unique combination of properties, such as high chemical and thermal stability, nontoxicity, high melting point, large energy band gap, high thermal conductivity, and intensive light emission. This combination makes AlN nanowires (NWs) a prospective material for optoelectronic and field-emission nanodevices. However, there has been very limited information on mechanical properties of AlN NWs that is essential for their reliable utilization in modern technologies. Herein, we thoroughly study mechanical properties of individual AlN NWs using direct,  in situ bending and tensile tests inside a high-resolution TEM. Overall, 22 individual NWs have been tested, and a strong dependence of their Young's moduli and ultimate tensile strengths (UTS) on their growth axis crystallographic orientation is documented. The Young's modulus of NWs grown along the [101̅1] orientation is found to be in a range 160-260 GPa, whereas for those grown along the [0002] orientation it falls within a range 350-440 GPa. In situ TEM tensile tests demonstrate the UTS values up to 8.2 GPa for the [0002]-oriented NWs, which is more than 20 times larger than that of a bulk AlN compound. Such properties make AlN nanowires a highly promising material for the reinforcing applications in metal matrix and other composites. Finally, experimental results were compared and verified under a density functional theory simulation, which shows the pronounced effect of growth axis on the AlN NW mechanical behavior. The modeling reveals that with an increasing NW width the Young's modulus tends to approach the elastic constants of a bulk material.

Mechanical, Electrical, and Crystallographic Property Dynamics of Bent and Strained Ge/Si Core-Shell Nanowires As Revealed by in situ Transmission Electron Microscopy.

Research on electromechanical properties of semiconducting nanowires, including plastic behavior of Si nanowires and superb carrier mobility of Ge and Ge/Si core-shell nanowires, has attracted increasing attention. However, to date, there have been no direct experimental studies on crystallography dynamics and its relation to electrical and mechanical properties of Ge/Si core-shell nanowires. In this Letter, we in parallel investigated the crystallography changes and electrical and mechanical behaviors of Ge/Si core-shell nanowires under their deformation in a transmission electron microscope (TEM). The core-shell Ge/Si nanowires were bent and strained in tension to high limits. The nanowire Young's moduli were measured to be up to ∼191 GPa, and tensile strength was in a range of 3-8 GPa. Using high-resolution imaging, we confirmed that under large bending strains, Si shells had irregularly changed to the polycrystalline/amorphous state, whereas Ge cores kept single crystal status with the local lattice strains on the compressed side. The nanowires revealed cyclically changed electronic properties and had decent mechanical robustness. Electron diffraction patterns obtained from  in situ TEM, paired with theoretical simulations, implied that nonequilibrium phases of polycrystalline/amorphous Si and ß-Sn Ge appearing during the deformations may explain the regarded mechanical robustness and varying conductivities under straining. Finally, atomistic simulations of Ge/Si nanowires showed the pronounced changes in their electronic structure during bending and the appearance of a conductive channel in compressed regions which might also be responsible for the increased conductivity seen in bent nanowires.

Chirality transitions and transport properties of individual few-walled carbon nanotubes as revealed by in situ TEM probing.

Physical properties of carbon nanotubes (CNTs) are closely related to the atomic structure, i.e. the chirality. It is highly desirable to develop a technique to modify their chirality and control the resultant transport properties. Herein, we present an in situ transmission electron microscopy (TEM) probing method to monitor the chirality transition and transport properties of individual few-walled CNTs. The changes of tube structure including the chirality are stimulated by programmed bias pulses and associated Joule heating. The chirality change of each shell is analyzed by nanobeam electron diffraction. Supported by molecular dynamics simulations, a preferred chirality transition path is identified, consistent with the Stone-Wales defect formation and dislocation sliding mechanism. The electronic transport properties are measured along with the structural changes, via fabricating transistors using the individual nanotubes as the suspended channels. Metal-to-semiconductor transitions are observed along with the chirality changes as confirmed by both the electron diffraction and electrical measurements. Apart from providing an alternative route to control the chirality of CNTs, the present work demonstrates the rare possibility of obtaining the dynamic structure-properties relationships at the atomic and molecular levels.

Compressive properties of hollow BN nanoparticles: theoretical modeling and testing using a high-resolution transmission electron microscope.

Due to their excellent mechanical properties, nanoparticles have great potential as reinforcing phases in composite materials, friction modifiers in liquid lubricants, catalysts and drug-delivery agents. In the present study, the mechanical analysis of individual spherical hollow BN nanoparticles (BNNPs) using a combination of in situ compression tests inside a high-resolution transmission electron microscope (TEM) and theoretical modelling was conducted. It was found that BNNPs display high mechanical stiffness and a large value of elastic recovery. This enables the hollow BNNPs to exhibit considerably large cyclic deformation (up to 30% of the sphere's original external diameter) and to accumulate plastic deformation of approximately 30% of the total compression strain. Theoretical simulations allowed for elucidation of BNNPs' structural changes under compression at the atomic level and explained the origin of their high stiffness and large critical deformation values.

Tuning of the Optical, Electronic, and Magnetic Properties of Boron Nitride Nanosheets with Oxygen Doping and Functionalization.

Engineering of the optical, electronic, and magnetic properties of hexagonal boron nitride (h-BN) nanomaterials via oxygen doping and functionalization has been envisaged in theory. However, it is still unclear as to what extent these properties can be altered using such methodology because of the lack of significant experimental progress and systematic theoretical investigations. Therefore, here, comprehensive theoretical predictions verified by solid experimental confirmations are provided, which unambiguously answer this long-standing question. Narrowing of the optical bandgap in h-BN nanosheets (from ≈5.5 eV down to 2.1 eV) and the appearance of paramagnetism and photoluminescence (of both Stokes and anti-Stokes types) in them after oxygen doping and functionalization are discussed. These results are highly valuable for further advances in semiconducting nanoscale electronics, optoelectronics, and spintronics.

One-atom-thick 2D copper oxide clusters on graphene.

The successful isolation and remarkable properties of graphene have recently triggered investigation of two-dimensional (2D) materials from layered compounds; however, one-atom-thick 2D materials without bulk layered counterparts are scarcely reported. Here we report the structure and properties of novel 2D copper oxide studied by experimental and theoretical methods. Electron microscopy observations reveal that copper oxide can form monoatomic layers with an unusual square lattice on graphene. Density functional theory calculations suggest that oxygen atoms at the centre of the square lattice stabilizes the 2D Cu structure, and that the 2D copper oxide sheets have unusual electronic and magnetic properties different from 3D bulk copper oxide.