Traveling surface acoustic wave (TSAW) microfluidic fluorescence activated cell sorter (µFACS).

We report a microfluidic fluorescence activated cell-sorting (µFACS) device that employs traveling surface acoustic waves (TSAW) to sort cells at rates comparable to conventional jet-in-air FACS machines, with high purity and viability. The device combines inertial flow focusing and sheath flow to align and evenly space cells, improving the sorting accuracy and screening rate. We sort with an interdigital transducer (IDT) whose tapered geometry allows precise positioning of the TSAW for optimal cell sorting. We sort three different cell lines at several kHz, at cell velocities exceeding one meter per second, while maintaining both sorting purity and cell viability at around 90% simultaneously.

Detection of Salmonella enterica in Meat in Less than 5 Hours by a Low-Cost and Noncomplex Sample Preparation Method.

Salmonella is recognized as one of the most important foodborne bacteria and has wide health and socioeconomic impacts worldwide. Fresh pork meat is one of the main sources of Salmonella, and efficient and fast methods for detection are therefore necessary. Current methods for Salmonella detection in fresh meat usually include >16 h of culture enrichment, in a few cases <12 h, thus requiring at least two working shifts. Here, we report a rapid (<5 h) and high-throughput method for screening of Salmonella in samples from fresh pork meat, consisting of a 3-h enrichment in standard buffered peptone water and a real-time PCR-compatible sample preparation method based on filtration, centrifugation, and enzymatic digestion, followed by fast-cycling real-time PCR detection. The method was validated in an unpaired comparative study against the Nordic Committee on Food Analysis (NMKL) reference culture method 187. Pork meat samples (n = 140) were either artificially contaminated with Salmonella at 0, 1 to 10, or 10 to 100 CFU/25 g of meat or naturally contaminated. Cohen's kappa for the degree of agreement between the rapid method and the reference was 0.64, and the relative accuracy, sensitivity, and specificity for the rapid method were 81.4, 95.1, and 97.9%, respectively. The 50% limit of detections (LOD50s) were 8.8 CFU/25 g for the rapid method and 7.7 CFU/25 g for the reference method. Implementation of this method will enable faster release of Salmonella low-risk meat, providing savings for meat producers, and it will help contribute to improved food safety.IMPORTANCE While the cost of analysis and hands-on time of the presented rapid method were comparable to those of reference culture methods, the fast product release by this method can provide the meat industry with a competitive advantage. Not only will the abattoirs save costs for work hours and cold storage, but consumers and retailers will also benefit from fresher meat with a longer shelf life. Furthermore, the presented sample preparation might be adjusted for application in the detection of other pathogenic bacteria in different sample types.

Cost-effective optimization of real-time PCR-based detection of Campylobacter and Salmonella with inhibitor tolerant DNA polymerases.

AIMS: The aim of this study was to cost-effectively improve detection of foodborne pathogens in PCR inhibitory samples through the use of alternative DNA polymerases. METHODS AND RESULTS: Commercially available polymerases (n = 16) and PCR master mixes (n = 4) were screened on DNA purified from bacterial cells in two validated real-time PCR assays for Campylobacter and Salmonella. The five best performing (based on: limit of detection (LOD), maximum fluorescence, shape of amplification curves and amplification efficiency) were subsequently applied to meat and faecal samples. The VeriQuest qPCR master mix performed best for both meat and faecal samples (LODs of 10(2) and 10(4) CFU ml(-1) in the purest and crudest DNA extractions respectively) compared with Tth (LOD = 10(2)-10(3) and 10(5)-10(6) CFU ml(-1)). AmpliTaqGold and HotMasterTaq both performed well (LOD = 10(2)-10(4) CFU ml(-1)) with meat samples and poorly (LOD = 10(3)-10(6) CFU ml(-1)/not detected) with faecal samples. CONCLUSIONS: Applying the VeriQuest qPCR master mix in the two tested real-time PCR assays could allow for simpler sample preparation and thus a reduction in cost. SIGNIFICANCE AND IMPACT OF THE STUDY: This work exemplifies a cost-effective strategy for optimizing real-time PCR-based assays. However, a DNA polymerase suitable for one assay and sample type is not necessarily optimal for other assays or sample types.

Low-cost monitoring of Campylobacter in poultry houses by air sampling and quantitative PCR.

The present study describes the evaluation of a method for the quantification of Campylobacter by air sampling in poultry houses. Sampling was carried out in conventional chicken houses in Poland, in addition to a preliminary sampling in Denmark. Each measurement consisted of three air samples, two standard boot swab fecal samples, and one airborne particle count. Sampling was conducted over an 8-week period in three flocks, assessing the presence and levels of Campylobacter in boot swabs and air samples using quantitative real-time PCR. The detection limit for air sampling was approximately 100 Campylobacter cell equivalents (CCE)/m3. Airborne particle counts were used to analyze the size distribution of airborne particles (0.3 to 10 µm) in the chicken houses in relation to the level of airborne Campylobacter. No correlation was found. Using air sampling, Campylobacter was detected in the flocks right away, while boot swab samples were positive after 2 weeks. All samples collected were positive for Campylobacter from week 2 through the rest of the rearing period for both sampling techniques, although levels 1- to 2-log CCE higher were found with air sampling. At week 8, the levels were approximately 10(4) and 10(5) CCE per sample for boot swabs and air, respectively. In conclusion, using air samples combined with quantitative real-time PCR, Campylobacter contamination could be detected earlier than by boot swabs and was found to be a more convenient technique for monitoring and/or to obtain enumeration data useful for quantitative risk assessment of Campylobacter.

Evaluation of pre-PCR processing approaches for enumeration of Salmonella enterica in naturally contaminated animal feed.

AIMS: Three pre-PCR processing strategies for the detection and/or quantification of Salmonella in naturally contaminated soya bean meal were evaluated. METHODS AND RESULTS: Methods included: (i) flotation-qPCR [enumeration of intact Salmonella cells prior to quantitative PCR (qPCR)], (ii) MPN-PCR (modified most probable number method combined with qPCR) and (iii) qualitative culture enrichment PCR. The limit of quantification was 1·8 × 10(2) CFU g(-1) (flotation-qPCR) and 0·02 MPN g(-1) (MPN-PCR). Fifteen naturally contaminated Salmonella positive soya bean meal samples from one lot were analysed in parallel with the three methods, using 2·5, 50 and 25 g of feed, respectively, resulting in detection of Salmonella in 6, 15 and 9 bags. Enumeration resulted in 1·8 × 10(2) -7·8 × 10(3) CFU g(-1) (flotation-qPCR) and 0·024 to >5·2 MPN g(-1) (MPN-PCR). CONCLUSIONS: Except for differences in methodology, results obtained with the three techniques could be due to the presence of nonculturable Salmonella and/or a heterogeneous distribution of Salmonella in the material. SIGNIFICANCE AND IMPACT OF THE STUDY: The evaluated methods provide different possibilities to assess the prevalence of Salmonella in feed, together with the numbers of culturable, as well as nonculturable cells, and can be applied to generate data to allow more accurate quantitative microbial risk assessment for Salmonella in the feed chain.

Rapid quantification of viable Campylobacter bacteria on chicken carcasses, using real-time PCR and propidium monoazide treatment, as a tool for quantitative risk assessment.

A number of intervention strategies against Campylobacter-contaminated poultry focus on postslaughter reduction of the number of cells, emphasizing the need for rapid and reliable quantitative detection of only viable Campylobacter bacteria. We present a new and rapid quantitative approach to the enumeration of food-borne Campylobacter bacteria that combines real-time quantitative PCR (Q-PCR) with simple propidium monoazide (PMA) sample treatment. In less than 3 h, this method generates a signal from only viable and viable but nonculturable (VBNC) Campylobacter bacteria with an intact membrane. The method's performance was evaluated by assessing the contributions to variability by individual chicken carcass rinse matrices, species of Campylobacter, and differences in efficiency of DNA extraction with differing cell inputs. The method was compared with culture-based enumeration on 50 naturally infected chickens. The cell contents correlated with cycle threshold (C(T)) values (R(2) = 0.993), with a quantification range of 1 x 10(2) to 1 x 10(7) CFU/ml. The correlation between the Campylobacter counts obtained by PMA-PCR and culture on naturally contaminated chickens was high (R(2) = 0.844). The amplification efficiency of the Q-PCR method was not affected by the chicken rinse matrix or by the species of Campylobacter. No Q-PCR signals were obtained from artificially inoculated chicken rinse when PMA sample treatment was applied. In conclusion, this study presents a rapid tool for producing reliable quantitative data on viable Campylobacter bacteria in chicken carcass rinse. The proposed method does not detect DNA from dead Campylobacter bacteria but recognizes the infectious potential of the VBNC state and is thereby able to assess the effect of control strategies and provide trustworthy data for risk assessment.

BF(3)-Induced rearrangement of aziridino cyclopropanes derived from 2-phenylsulfonyl 1,3-dienes. Application to the total synthesis of (+/-)-ferruginine.

Total synthesis of the alkaloid (+/-)-ferruginine (1) has been developed via the 2-phenylsulfonyl 1,3-diene approach. BF(3)-induced rearrangement of the N-protected cyclohexane aziridino cyclopropane 8, derived from its corresponding epoxy cyclopropane, afforded the desired tropane alkaloid skeleton 9 in good yield. Michael addition of nitroethane (as an acyl anion equivalent) and transformation of the nitro group of the adduct 10 to a keto function gave 11. Elimination of benzenesulfinic acid and subsequent replacement of the tosyl group by a methyl group afforded the title compound 1.