The Ras dimer structure.

Oncogenic mutated Ras is a key player in cancer, but despite intense and expensive approaches its catalytic center seems undruggable. The Ras dimer interface is a possible alternative drug target. Dimerization at the membrane affects cell growth signal transduction. In vivo studies indicate that preventing dimerization of oncogenic mutated Ras inhibits uncontrolled cell growth. Conventional computational drug-screening approaches require a precise atomic dimer model as input to successfully access drug candidates. However, the proposed dimer structural models are controversial. Here, we provide a clear-cut experimentally validated N-Ras dimer structural model. We incorporated unnatural amino acids into Ras to enable the binding of labels at multiple positions via click chemistry. This labeling allowed the determination of multiple distances of the membrane-bound Ras-dimer measured by fluorescence and electron paramagnetic resonance spectroscopy. In combination with protein-protein docking and biomolecular simulations, we identified key residues for dimerization. Site-directed mutations of these residues prevent dimer formation in our experiments, proving our dimer model to be correct. The presented dimer structure enables computational drug-screening studies exploiting the Ras dimer interface as an alternative drug target.

Time-resolved spectroscopic and electrophysiological data reveal insights in the gating mechanism of anion channelrhodopsin.

Channelrhodopsins are widely used in optogenetic applications. High photocurrents and low current inactivation levels are desirable. Two parallel photocycles evoked by different retinal conformations cause cation-conducting channelrhodopsin-2 (CrChR2) inactivation: one with efficient conductivity; one with low conductivity. Given the longer half-life of the low conducting photocycle intermediates, which accumulate under continuous illumination, resulting in a largely reduced photocurrent. Here, we demonstrate that for channelrhodopsin-1 of the cryptophyte Guillardia theta (GtACR1), the highly conducting C = N-anti-photocycle was the sole operating cycle using time-resolved step-scan FTIR spectroscopy. The correlation between our spectroscopic measurements and previously reported electrophysiological data provides insights into molecular gating mechanisms and their role in the characteristic high photocurrents. The mechanistic importance of the central constriction site amino acid Glu-68 is also shown. We propose that canceling out the poorly conducting photocycle avoids the inactivation observed in CrChR2, and anticipate that this discovery will advance the development of optimized optogenetic tools.

Design of an Ultrafast G Protein Switch Based on a Mouse Melanopsin Variant.

The primary goal of optogenetics is the light-controlled noninvasive and specific manipulation of various cellular processes. Herein, we present a hybrid strategy for targeted protein engineering combining computational techniques with electrophysiological and UV/visible spectroscopic experiments. We validated our concept for channelrhodopsin-2 and applied it to modify the less-well-studied vertebrate opsin melanopsin. Melanopsin is a promising optogenetic tool that functions as a selective molecular light switch for G protein-coupled receptor pathways. Thus, we constructed a model of the melanopsin Gq protein complex and predicted an absorption maximum shift of the Y211F variant. This variant displays a narrow blue-shifted action spectrum and twofold faster deactivation kinetics compared to wild-type melanopsin on G protein-coupled inward rectifying K+ (GIRK) channels in HEK293 cells. Furthermore, we verified the in vivo activity and optogenetic potential for the variant in mice. Thus, we propose that our developed concept will be generally applicable to designing optogenetic tools.

One gene, two proteins: coordinated production of a copper chaperone by differential transcript formation and translational frameshifting in Escherichia coli.

Programmed ribosomal frameshifting (PRF) is a translational anomaly causing the ribosome to shift into an alternative reading frame. PRFs are common in viral genomes, using a single nucleotide sequence to code for two proteins in overlapping frames. In bacteria and eukaryota, PRFs are less frequent. We report on a PRF in the copper detoxification system of Escherichia coli where a metallochaperone is generated out of the first 69 amino acids and a C-terminal out-of-frame glycine of the gene copA. copA besides codes for the P1B -ATPase CopA, a membrane-integral protein and principal interaction target of the chaperone. To enhance the production of the frameshift-generated cytosolic copper binding protein a truncated transcript is produced from the monocistronic copA gene. This shorter transcript is essential for producing sufficient amounts of the chaperone to support the membrane pump. The findings close the gap in our understanding of the molecular physiology of cytoplasmic copper transport in E. coli, revealing that a chaperone-like entity is required for full functionality of the P1B -ATPase copper pump. We, moreover, demonstrate that the primary transcriptional response to copper results in formation of the small transcript and concurrently, the metallochaperone plays a key role in resistance against copper shock.

Distinct functions of serial metal-binding domains in the Escherichia coli†P1 B -ATPase CopA.

P1 B -ATPases are among the most common resistance factors to metal-induced stress. Belonging to the superfamily of P-type ATPases, they are capable of exporting transition metal ions at the expense of adenosine triphosphate (ATP) hydrolysis. P1 B -ATPases share a conserved structure of three cytoplasmic domains linked by a transmembrane domain. In addition, they possess a unique class of domains located at the N-terminus. In bacteria, these domains are primarily associated with metal binding and either occur individually or as serial copies of each other. Within this study, the roles of the two adjacent metal-binding domains (MBDs) of CopA, the copper export ATPase of Escherichia coli were investigated. From biochemical and physiological data, we deciphered the protein-internal pathway of copper and demonstrate the distal N-terminal MBD to possess a function analogous to the metallochaperones of related prokaryotic copper resistance systems, that is its involvement in the copper transfer to the membrane-integral ion-binding sites of CopA. In contrast, the proximal domain MBD2 has a regulatory role by suppressing the catalytic activity of CopA in absence of copper. Furthermore, we propose a general functional divergence of tandem MBDs in P1 B -ATPases, which is governed by the length of the inter-domain linker.

The ATPases CopA and CopB both contribute to copper resistance of the thermoacidophilic archaeon Sulfolobus solfataricus.

Certain heavy metal ions such as copper and zinc serve as essential cofactors of many enzymes, but are toxic at high concentrations. Thus, intracellular levels have to be subtly balanced. P-type ATPases of the P(IB)-subclass play a major role in metal homeostasis. The thermoacidophile Sulfolobus solfataricus possesses two P(IB)-ATPases named CopA and CopB. Both enzymes are present in cells grown in copper-depleted medium and are accumulated upon an increase in the external copper concentration. We studied the physiological roles of both ATPases by disrupting genes copA and copB. Neither of them affected the sensitivity of S. solfataricus to reactive oxygen species, nor were they a strict prerequisite to the biosynthesis of the copper protein cytochrome oxidase. Deletion mutant analysis demonstrated that CopA is an effective copper pump at low and high copper concentrations. CopB appeared to be a low-affinity copper export ATPase, which was only relevant if the media copper concentration was exceedingly high. CopA and CopB thus act as resistance factors to copper ions at overlapping concentrations. Moreover, growth tests on solid media indicated that both ATPases are involved in resistance to silver.

Spectroscopic investigation of the reaction mechanism of CopB-B, the catalytic fragment from an archaeal thermophilic ATP-driven heavy metal transporter.

The mechanism of ATP hydrolysis of a shortened variant of the heavy metal-translocating P-type ATPase CopB of Sulfolobus solfataricus was studied. The catalytic fragment, named CopB-B, comprises the nucleotide binding and phosphorylation domains. We demonstrated stoichiometric high-affinity binding of one nucleotide to the protein (K(diss) 1-20 microm). Mg is not necessary for nucleotide association but is essential for the phosphatase activity. Binding and hydrolysis of ATP released photolytically from the caged precursor nitrophenylethyl-ATP was measured at 30 degrees C by infrared spectroscopy, demonstrating that phosphate groups are not involved in nucleotide binding. The hydrolytic kinetics was biphasic, and provides evidence for at least one reaction intermediate. Modelling of the forward reaction gave rise to three kinetic states connected by two intrinsic rate constants. The lower kinetic constant (k(1) = 4.7 x 10(-3) s(-1) at 30 degrees C) represents the first and rate-limiting reaction, probably reflecting the transition between the open and closed conformations of the domain pair. The subsequent step has a faster rate (k(2) = 17 x 10(-3) s(-1) at 30 degrees C), leading to product formation. Although the latter appears to be a single step, it probably comprises several reactions with presently unresolved intermediates. Based on these data, we suggest a model of the hydrolytic mechanism.

Structural model of the CopA copper ATPase of Enterococcus hirae based on chemical cross-linking.

The CopA copper ATPase of Enterococcus hirae belongs to the family of heavy metal pumping CPx-type ATPases and shares 43% sequence similarity with the human Menkes and Wilson copper ATPases. Due to a lack of suitable protein crystals, only partial three-dimensional structures have so far been obtained for this family of ion pumps. We present a structural model of CopA derived by combining topological information obtained by intramolecular cross-linking with molecular modeling. Purified CopA was cross-linked with different bivalent reagents, followed by tryptic digestion and identification of cross-linked peptides by mass spectrometry. The structural proximity of tryptic fragments provided information about the structural arrangement of the hydrophilic protein domains, which was integrated into a three-dimensional model of CopA. Comparative modeling of CopA was guided by the sequence similarity to the calcium ATPase of the sarcoplasmic reticulum, Serca1, for which detailed structures are available. In addition, known partial structures of CPx-ATPase homologous to CopA were used as modeling templates. A docking approach was used to predict the orientation of the heavy metal binding domain of CopA relative to the core structure, which was verified by distance constraints derived from cross-links. The overall structural model of CopA resembles the Serca1 structure, but reveals distinctive features of CPx-type ATPases. A prominent feature is the positioning of the heavy metal binding domain. It features an orientation of the Cu binding ligands which is appropriate for the interaction with Cu-loaded metallochaperones in solution. Moreover, a novel model of the architecture of the intramembranous Cu binding sites could be derived.

Sulfate acts as phosphate analog on the monomeric catalytic fragment of the CPx-ATPase CopB from Sulfolobus solfataricus.

The crystal structure of the catalytic fragment of a Sulfolobus solfataricus P-type ATPase, CopB-B, was determined with a 2.6 A resolution. CopB-B is the major soluble fragment of the archaeal CPx-ATPase CopB and is comprized of a nucleotide and a phosphorylation domain. In the crystalline state two molecules of CopB-B are in close contact to each other, although the presence of dimers in free solution could be ruled out by analytical ultracentrifugation. The overall architecture of CopB-B is similar to that of other P-type ATPases such as Ca-ATPase. Short peptide segments are linking the nucleotide binding to the phosphorylation domain. CopB-B exhibits 33% sequence identity (of 216 aligned residues) with the respective fragment of the Archaeoglobus fulgidus ATPase CopA. The CopB-B nucleotide-binding domain has the most primitive fold yet identified for this enzyme class. It is 24% identical to the nucleotide-binding domain of the disease-related Wilson ATPase ATP7B (80 structurally aligned residues). Structural superposition with Ca-ATPase suggests a putative nucleotide-binding site in CopB-B. The phosphorylation domain of CopB-B is structurally related to the corresponding part of Ca-ATPase in the anion-bound E2 state. In CopB-B crystals, a bound sulfate anion was identified at the phosphate-binding location. In solution state, the potential binding of CopB-B to phosphate was probed with (32)P(i). Bound phosphate could be readily displaced by orthovanadate at submillimolar concentration as well as by sulfate at millimolar concentration. It is possible therefore to assign the structure of the sulfate-bound phosphorylation domain of CopB-B to a state related to the E2.P(i) intermediate state of the catalytic cycle.

Expression, isolation, and crystallization of the catalytic domain of CopB, a putative copper transporting ATPase from the thermoacidophilic archaeon Sulfolobus solfataricus.

The P-type CPX-ATPases are responsible for the transport of heavy metal ions in archaea, bacteria, and eukaryotes. We have chosen one of the two CPX-ATPases of the thermophile Sulfolobus solfataricus, CopB (= SSO2896) for the investigation of the molecular mechanism of this integral membrane protein. We recombinately expressed three different soluble domains of this protein (named CopB-A, CopB-B, and CopB-C) in Escherichia coli and purified them to homogeneity. 3D crystals of CopB-B, the 29 kDa catalytic ATP binding/phosphorylation domain were produced, which diffracted to a resolution of 2.2 A. CopB-B has heavy metal stimulated phosphatase activity, which was half maximal in the presence of 80 microM Cu2+. The protein forms a phosphorylated intermediate with the substrate gamma-(32P)-ATP. No specific activation of the polypeptide was observed, when CopB-B phosphatase activity was tested in the presence of the purified CopB-C and CopB-A proteins, which provide the cation binding and the phosphatase domains. We conclude that CopB is a putatively copper translocating ATPase, in which structural elements integrally located in the membrane are required for full, coordinated activation of the catalytic ATP binding domain.

Noninvasive auto-photoreduction used as a tool for studying structural changes in heme-copper oxidases by FTIR spectroscopy.

We demonstrate an efficient Fourier transform infrared (FTIR) spectroscopic method, termed "auto-photoreduction," that uses anaerobic photo-induced internal electron transfer to monitor reaction-initiated changes of heme-copper oxidases. It can be applied without the use of either expensive electrochemical equipment, or caged compounds, which cause significant background signals. At high irradiation power, carbon monoxide is released from high-spin heme a of cytochrome c oxidase and heme o from cytochrome bo(3). Photochemistry is initiated at wavelengths <355 nm, and the photochemical action spectrum has a maximum of 290 nm for cytochrome bo(3), which is consistent with the possible intermediate involvement of tyrosinate or an activated state of tyrosine. We propose that the final electron donors are proton channel water molecules. In the pH range of 4-9, the noninvasive auto-photoreduction method yields highly reproducible FTIR redox difference spectra within a broad range, resolving a number of vibrational changes outside the amide I region (1600-1640 cm(-1)). Furthermore, it provides details of redox-induced changes in the spectral region between 1600 and 1100 cm(-1). The auto-photoreduction method should be universally applicable to heme proteins.

Electron transfer at the low-spin heme b of cytochrome bo(3) induces an environmental change of the catalytic enhancer glutamic acid-286.

Intramolecular proton transfer of heme-copper oxidases is performed via the K- and the transmembrane D-channels. A carboxyl group conserved in a subgroup of heme-copper oxidases, located within the D-channel close to the binuclear center (=glutamic acid-286 in cytochrome bo(3) from Escherichia coli) is essential for proton pumping. Upon electron transfer to the fully oxidized (FO) enzyme, this amino acid has been shown to undergo a cyanide-independent environmental change. The redox-induced environmental transition of glutamic acid-286 is preserved in the site-directed mutant Y288F, which has lost its Cu(B) binding capacity. Furthermore, the mixed-valence (MV) redox state of cytochrome bo(3) (in which Cu(B) and high-spin heme are reduced, whereas the low-spin heme stays oxidized) was prepared by anaerobic exposure of the protein to carbon monoxide. This complex was converted (i) to the FO state by reaction with the caged dioxygen donor mu-peroxo) (mu-hydroxo) bis [bis (bipyridyl) cobalt (III)] and (ii) to the fully reduced (FR) state via caged electron donors; the environmental change of glutamic acid-286 could be observed only upon reduction. Taken together, these results from two different lines of evidence clearly show that the redox transition of the low-spin heme b center alone triggers the change in the chemical environment of this acidic side chain. It is suggested that glutamic acid-286 is a kinetic enhancer of proton translocation, which is energetically favoured in mesophilic oxidases.

Caged O(2). Reaction of cytochrome bo(3) oxidase with photochemically released dioxygen from a cobalt peroxo complex.

We developed the synthesis of the caged oxygen donor (micro-peroxo)(micro-hydroxo)bis[bis(bipyridyl)cobalt(III)] complex (HPBC) as nitrate salt, which has, compared with the perchlorate-form described previously [MacArthur, R., Sucheta, A., Chong, F.F. & Einarsdottir, O. (1995) Proc. Natl Acad. Sci. USA, 92, 8105-8109], greatly enhanced solubility. Now, the quantum efficiency of the photolytical release of dioxygen was determined to be 0.4 per photon at a laser wavelength of 308 nm, which was used to observe biological reactions. The X-ray structure of HPBC has been solved, and the molecular interactions of photochemically generated oxygen with cytochrome oxidase were investigated with optical and FT-IR spectroscopy: it acts as acceptor of electrons transferred from prereduced cytochrome bo(3), the heme-copper oxidase from Escherichia coli. FT-IR spectra revealed typical absorbance difference changes in the carbonyl region of cytochrome bo(3), supported by bandshifts due to solvent isotope exchange and by assignment using site-directed mutants. IR difference spectra of the photooxidation reaction using the caged oxygen compound, and of the photoreduction reaction using the caged electron donor FMN, have inverted shapes. The spectroscopic signals of carboxyl groups are thus equivalent in both reactions: the use of chemically produced oxygen allows the observation of the ongoing molecular changes of cytochrome bo(3) oxidase under quasi-physiological conditions.