Efficient Warming Textile Enhanced by a High-Entropy Spectrally Selective Nanofilm with High Solar Absorption.

Solar and radiative warming are smart approaches to maintaining the human body at a metabolically comfortable temperature in both indoor and outdoor scenarios. Nevertheless, existing warming textiles are ineffective in frigid climates because the solar absorption of selective absorbing coating is significantly reduced when coated on rough textile surface. Herein, for the first time, high-entropy nitrides based spectrally selective film (SSF) is introduced on common cotton through a one-step magnetron sputtering method. The well-designed refractive index gradient enables destructive interference effects, offering a roughness-insensitive high solar absorptance (92.8%) and low thermal emittance (39.2%). Impressively, the solar absorptance is 9.1% higher than the reported best-performing selective nanofilm-based textile. As a result, such a textile achieves a record-high photothermal conversion efficiency (82.2% under 0.6 suns, at 0 °C). This textile yields a 3.5 °C drop in the set-point of indoor air-conditioner temperature. Besides, in a winter morning with an air temperature of 7.5 °C, it warms up the human skin by as large as 12 °C under weak sunlight (350 W m-2 ). More importantly, such a superior radiative warming performance is achieved by engineering the widely used cotton without compromising its breathability and durability, showing great potential for practical applications.

Synthesis of magnetic graphene oxide grafted polymaleicamide dendrimer nanohybrids for adsorption of Pb(II) in aqueous solution.

In this paper, using maleic anhydride and ethylenediamine as functional monomers, graphene oxide (GO) loaded magnetic Fe3O4 nanoparticles modified by (3-Aminopropyl) triethoxysilane as support, magnetic graphene oxide grafted polymaleicamide dendrimer (GO/Fe3O4-g-PMAAM) nanohybrids were fabricated by divergent method and magnetic separation technology. The obtained samples were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, elementary analyzer and vibrating sample magnetometer. The effects of PMAAM generations, solution pH, Pb(II) initial concentration, temperature and contact time on the adsorption property of the samples for Pb(II) in aqueous solution were studied. The results demonstrated that nitrogen content and adsorption capacity of the as-synthesized samples with amino terminal groups were all higher than their adjacent generations PMAAM with carboxyl terminal groups. Moreover, with increasing generations of PMAAM grafted on to the GO/Fe3O4, the nitrogen content and the adsorption capacity of the samples with the same terminal groups gradually increased. The maximum adsorption capacity of GO/Fe3O4-g-G3.0 for Pb(II) was 181.4mgg-1 at 298K. The rising of temperature was beneficial for the adsorption. The adsorption kinetics had a better agreement with pseudo-second-order equation, and equilibrium data followed the Langmuir model.

Preparation of polyamidoamine dendrimers functionalized magnetic graphene oxide for the adsorption of Hg(II) in aqueous solution.

In this study, using graphene oxide supported Fe3O4 nanoparticles as carriers, ethylenediamine and methyl acrylate as functional monomer, different generations of polyamidoamine dendrimers functionalized magnetic graphene oxide (MGO-PAMAM), up to generation 4.0, were successfully synthesized via step by step growth chemical grafting approach and magnetic separation technology. In the process of synthesizing dendrimers, the generation of dendrimers was increased with the increasing of reaction cycles. In other words, the dendrimers generation is determined from the number of branch iterations. The obtained MGO-PAMAM were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), elemental analysis, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), nitrogen adsorption/desorption isotherm and Zeta potential analysis. The adsorption properties of the synthesized products for Hg(II) in aqueous solution were investigated by batch experiments. The results showed that the MGO-PAMAM with generation 3.0 of dendrimers (MGO-PAMAM-G3.0) has the maximum adsorption capacity of 113.71mg·g-1. The adsorption process of MGO-PAMAM-G3.0 for Hg(II) was well described by the pseudo-second-order kinetics model and the Langmuir isotherm model. The Hg(II) adsorbed on the surface of MGO-PAMAM-G3.0 was reduced to Hg(I) in the adsorption process. In addition, the MGO-PAMAM possesse good magnetic separation performance.

Superhydrophobic Mesoporous Graphene for Separation and Absorption.

Mesoporous graphene with a surface area of 306 m2 g-1 was synthesized by employing CaCO3 microspheres as hard templates. By surface modification with polydimethylsiloxane (PDMS) through chemical vapor deposition, the wettability of as-treated mesoporous graphene can be tailored to be superhydrophobic to water while superoleophilic to oils. The deposition of the low-surface-energy silicon-coating originated from PDMS pyrolysis on porous graphene was confirmed by X-ray photoelectron spectroscopy. As a result of its porous structures and excellent surface superhydrophobicity, the PDMS-treated mesoporous graphene exhibits good selectivity, excellent recyclability, and good absorption performance (up to 66 g g-1 ) for a wide range of oils and organic solvents. Thus, leading to potential use in a variety of applications such as water treatment and purification as well as cleanup of oil spills.