Highly Enantioselective Polymerization of ß-Butyrolactone by a Bimetallic Magnesium Catalyst: An Interdependent Relationship Between Favored and Unfavored Enantiomers.

Herein, we report that (S,S)-prophenolMg2(µ-OnBu)(THF)2 ((S,S)-1, prophenol = (S,S)-2,6-bis[2-(hydroxydiphenylmethyl)pyrrolidin-1-ylmethyl]-4-methylphenol) is a highly enantioselective (kR/kS = 140) precatalyst for ring-opening polymerization of rac-ß-butyrolactone (ß-BL) to isotactic poly(3-hydroxybutyrate) (i-PHB), a high performance, biodegradable polyester. Precatalyst (S,S)-1 polymerizes (R)-ß-BL with an inversion of stereochemistry to (S)-PHB with a m% (percentage of adjacent linkages with a meso configuration) of 98% at 41% conversion and Tm of 165 °C under a variety of conditions. Complex (S,S)-1 demonstrates unique polymerization kinetics, as it does not polymerize the preferred enantiomer, (R)-ß-BL, alone. Mechanistic studies revealed that (S)-ß-BL is needed to convert (S,S)-1 into the active enantioselective polymerization catalyst. To the best of our knowledge, (S,S)-1 produces i-PHB with the highest degree of isotacticity observed from a polymerization of rac-ß-BL. This study informs the design and understanding of future enantioselective and earth-abundant metal catalysts for ring-opening polymerization of ß-lactones.

Atactic, Isotactic, and Syndiotactic Methylated Polyhydroxybutyrates: An Unexpected Series of Isomorphic Polymers.

Polyhydroxyalkanoates (PHAs), such as poly[(R)-3-hydroxybutyrates] [(R)-P3HB], are produced by bacteria and are promising alternatives to nondegradable polyolefin plastics, but their semicrystallinity and high melting points are only maintained at high tacticity, which are commonly seen in other semicrystalline polymers like isotactic polypropylene (iPP). We herein report a class of synthetic PHAs, cis-poly(3-hydroxy-2-methylbutyrate)s (cis-PHMBs), that exhibit tacticity-independent semicrystallinity. The syndiotactic, isotactic, and even atactic PHMBs all share high melting points (Tm > 170 °C) and nearly identical crystal structures. The isomorphism of these polymers across three different tacticities has allowed access to iPP-like, high-performance PHMB without the requirement of high tacticity.

Polyethylene Incorporating Diels-Alder Comonomers: A "Trojan Horse" Strategy for Chemically Recyclable Polyolefins.

Polyolefins with periodic unsaturation in the backbone chain are sought after for synthesizing chemically recyclable polymers or telechelic polyolefin macromonomers. Here we introduce a bottom-up synthesis of unsaturated high-density polyethylene (HDPE) via copolymerization of ethylene with dimethyl 7-oxabicyclo[2.2.1]hepta-2,5-diene-3,5-dicarboxylate followed by post-polymerization retro-Diels-Alder to unveil hidden double bonds in the polymer backbone. The incorporation of this "Trojan Horse" comonomer was varied and a series of unsaturated HDPE polymers with block lengths of 1.2, 1.9, and 3.5 kDa between double bonds was synthesized. Cross metathesis of unsaturated HDPE samples with 2-hydroxyethyl acrylate yielded telechelic ester terminated PE macromonomers suitable for the preparation of ester-linked PE. These materials were depolymerized and repolymerized, making them suitable candidates for chemical recycling. The ester-linked PE displayed thermal and mechanical properties comparable to commercial HDPE.

Nature-inspired methylated polyhydroxybutyrates from C1 and C4 feedstocks.

Polyolefin plastics are widely used due to their low cost and outstanding properties, but their environmental persistence presents a major societal challenge. Polyhydroxyalkanoates (PHA) are biodegradable substitutes for polyolefins, but their high cost and thermal instability are impediments to their widespread application. Here we report a series of methylated polyhydroxybutyrates, poly(3-hydroxy-2-methylbutyrate)s, which are structurally inspired by natural PHAs. The cis homopolymers exhibit tacticity-independent crystallinity, which allows for the discovery of high-melting, thermally stable and mechanically tough copolymers, and a full range of polyolefin-like properties can be further achieved by tailoring the cis/trans ratio of the repeating units. Moreover, these materials can be synthesized from inexpensive carbon monoxide and 2-butene feedstocks, and they can be chemically recycled or upcycled at their end of life. The versatile properties, abundant feedstocks and end-of-life utility of this family of polyesters will enable a powerful platform for the discovery of sustainable alternatives to polyolefin plastics.

Double-resonance 17O NMR experiments reveal unique configurational information for surface organometallic complexes.

Obtaining three-dimensional (3D) configurational information of surface organometallic complexes is a persistent challenge due to the low spatial sensitivity of most spectroscopic methods. We show that employing 17O-enriched supports enables highly informative multidimensional NMR experiments, including radial and vertical distance measurements, that can be used to elucidate site geometry.

Zirconium-Catalyzed C-H Alumination of Polyolefins, Paraffins, and Methane.

C-H/Et-Al exchange in zirconium-catalyzed reactions of saturated hydrocarbons and AlEt3 affords versatile organoaluminum compounds and ethane. The grafting of commercially available Zr(OtBu)4 on silica/alumina gives monopodal ≡SiO-Zr(OtBu)3 surface pre-catalyst sites that are activated in situ by ligand exchange with AlEt3. The catalytic C-H alumination of dodecane at 150 °C followed by quenching in air affords n-dodecanol as the major product, revealing selectivity for methyl group activation. Shorter hydrocarbon or alcohol products were not detected under these conditions. Catalytic reactions of cyclooctane and AlEt3, however, afford ring-opened products, indicating that C-C bond cleavage occurs readily in methyl group-free reactants. This selectivity for methyl group alumination enables the C-H alumination of polyethylenes, polypropylene, polystyrene, and poly-α-olefin oils without significant chain deconstruction. In addition, the smallest hydrocarbon, methane, undergoes selective mono-alumination under solvent-free catalytic conditions, providing a direct route to Al-Me species.

Catalytic Chemical Recycling of Post-Consumer Polyethylene.

Among commercial plastics, polyolefins are the most widely produced worldwide but have limited recyclability. Here, we report a chemical recycling route for the conversion of post-consumer high-density polyethylene (HDPE) into telechelic macromonomers suitable for circular reprocessing. Unsaturation was introduced into HDPE by catalytic dehydrogenation using an Ir-POCOP catalyst without an alkene acceptor. Cross-metathesis with 2-hydroxyethyl acrylate followed by hydrogenation transformed the partially unsaturated HDPE into telechelic macromonomers. The direct repolymerization of the macromonomers gave a brittle material due to the low overall weight-average molecular weight. Aminolysis of telechelic macromonomers with a small amount of diethanolamine increased the overall functionality. The resulting macromonomers were repolymerized through transesterification to generate a polymer with comparable mechanical properties to the starting post-consumer HDPE waste. Depolymerization of the repolymerized material catalyzed by an organic base regenerated the telechelic macromonomers, thereby allowing waste polyethylene materials to enter a chemical recycling pathway.

Chemically Recyclable Ester-Linked Polypropylene.

Polyolefins represent the largest class of commodity materials due to their excellent material properties; however, they have limited pathways to chemical recycling and are often difficult to mechanically recycle. Here we demonstrate a new catalyst for the isoselective copolymerization of propylene and butadiene capable of favoring 1,4-insertion over 1,2-insertion while maintaining good molecular weights and turnover frequencies. This isotactic propylene copolymer with main-chain unsaturation was depolymerized to a telechelic macromonomer using an olefin metathesis catalyst and 2-hydroxyethyl acrylate. After hydrogenation, the telechelic macromonomer was repolymerized to form an ester-linked polypropylene material. This polymer shows thermal and mechanical properties comparable to linear low-density polyethylene. Finally, the telechelic macromonomer could be regenerated through the depolymerization of the ester-linked polypropylene material, which allows for the chemical recycling to macromonomer. This process provides a route to transform partially unsaturated polyolefins to chemically recyclable materials with similar properties to their parent polymers.

Size-Controlled Nanoparticles Embedded in a Mesoporous Architecture Leading to Efficient and Selective Hydrogenolysis of Polyolefins.

A catalytic architecture, comprising a mesoporous silica shell surrounding platinum nanoparticles (NPs) supported on a solid silica sphere (mSiO2/Pt-X/SiO2; X is the mean NP diameter), catalyzes hydrogenolysis of melt-phase polyethylene (PE) into a narrow C23-centered distribution of hydrocarbons in high yield using very low Pt loadings (∼10-5 g Pt/g PE). During catalysis, a polymer chain enters a pore and contacts a Pt NP where the C-C bond cleavage occurs and then the smaller fragment exits the pore. mSiO2/Pt/SiO2 resists sintering or leaching of Pt and provides high yields of liquids; however, many structural and chemical effects on catalysis are not yet resolved. Here, we report the effects of Pt NP size on activity and selectivity in PE hydrogenolysis. Time-dependent conversion and yields and a lumped kinetics model based on the competitive adsorption of long vs short chains reveal that the activity of catalytic material is highest with the smallest NPs, consistent with a structure-sensitive reaction. Remarkably, the three mSiO2/Pt-X/SiO2 catalysts give equivalent selectivity. We propose that mesoscale pores in the catalytic architecture template the C23-centered distribution, whereas the active Pt sites influence the carbon-carbon bond cleavage rate. This conclusion provides a framework for catalyst design by separating the C-C bond cleavage activity at catalytic sites from selectivity for chain lengths of the products influenced by the structure of the catalytic architecture. The increased activity, selectivity, efficiency, and lifetime obtained using this architecture highlight the benefits of localized and confined environments for isolated catalytic particles under condensed-phase reaction conditions.

Transition from child to adult health care for patients with lysosomal storage diseases in France: current status and priorities-the TENALYS study, a patient perspective survey.

BACKGROUND: Transition from childhood to adulthood (TCA) is usually difficult in rare, progressive and multisystemic diseases. New treatments and modalities of care for many lysosomal diseases (LD) can increase life expectancy, and a successful TCA can help patient who reach adulthood to avoid disruption to health care. In France, some TCA initiatives have been taken by referral centers but in view of the problems encountered by Vaincre les Maladies Lysosomales (VML), the LD patient association, they seem to be insufficient. The aim of this study is to determine the current state of the TCA process and to identify actions to improve it through interviews with patient families and physicians in LD referral centers. The study is based upon an observational, non-interventional, cross-sectional, national survey which used two anonymous questionnaires. These questionnaires, developed by a scientific committee including representatives from VML and medical specialists in LD, were sent to patients who were receiving care in pediatric departments at age 15 years or older. Questionnaires were also sent to their referral pediatricians. RESULTS: Fifty-four patients were included. Forty-two questionnaires were completed by patients and their corresponding physicians and 12 were completed by physicians only. The majority of the patients (80%) were informed that transfer to adult healthcare would occur, but 52% were informed after their eighteenth birthday. Forty-eight percent indicated that they were informed that a TCA coordinator would be appointed; for 39% the time frame for the transfer was communicated, and 31% were informed of the composition of the adult medical team. Among the actions that patients rated as "important/very important", and considered to be a priority in their comments, the most frequently cited were the provision of explanatory documents on the TCA (94%), the transmission of the medical file from the pediatric sector to the adult sector (94%) and a joint consultation with both pediatrician and adult unit physician (91%). Physicians were in agreement concerning the primary importance of the last two actions. CONCLUSION: This study provides a basis for the deployment, on the national level, of transition programs which include specific actions that patients view as priorities.

Topical Treatment of Psoriasis Vulgaris: The Swiss Treatment Pathway.

Topical treatment is crucial for the successful management of plaque psoriasis. Topicals are used either as a stand-alone therapy for mild psoriasis or else in combination with UV or systemic treatment for moderate-to-severe disease. For the choice of a suitable topical treatment, the formulation matters and not just the active substances. This expert opinion paper was developed via a non-structured consensus process by Swiss dermatologists in hospitals and private practices to illustrate the current treatment options to general practitioners and dermatologists in Switzerland. Defining treatment goals together with the patient is crucial and increases treatment adherence. Patients' personal preferences and pre-existing experiences should be considered and their satisfaction with treatment and outcome regularly assessed. During the induction phase of "classical" mild-to-moderate psoriasis, the fixed combination of topical calcipotriol (Cal) 50 µg/g and betamethasone dipropionate (BD) 0.5 mg/g once daily is frequently used for 4-8 weeks. During the maintenance phase, a twice weekly (proactive) management has proved to reduce the risk of relapse. Of the fixed combinations, Cal/BD aerosol foam is the most effective formulation. However, the individual choice of formulation should be based on a patient's preference and the location of the psoriatic plaques. Tailored recommendations are given for the topical management of specific areas (scalp, facial, intertriginous/genital, or palmoplantar lesions), certain symptoms (hyperkeratotic or hyperinflammatory forms) as well as during pregnancy or a period of breastfeeding. As concomitant basic therapy, several emollients are recommended. If topical treatment alone does not appear to be sufficient, the regimen should be escalated according to the Swiss S1-guideline for the systemic treatment of psoriasis.

Physiotherapy in Haiti: A qualitative study exploring local clinicians' perspectives.

BACKGROUND AND PURPOSE: The physiotherapy profession in Haiti has seen many changes since the earthquake in 2010, due to the increased number of Haitians living with permanent impairments. The earthquake sparked a significant humanitarian response. Research shows that the response focused mainly on providing short-term rehabilitation services without sustained efforts to develop sustainable rehabilitation services. A decade later, little is known about the state of the Haitian physiotherapy profession. The purpose of this study was to explore the perspectives of Haitian physiotherapy professionals regarding the current state of the profession in terms of strengths, weaknesses, opportunities and threats. METHODS: We used a qualitative exploratory descriptive design. This study consisted of two phases: (1) a survey to identify potential interview participants, and identify preliminary themes to be explored in the follow-up interviews, and (2) a series of semi-structured qualitative interviews. We performed a thematic analysis of the interview transcripts. RESULTS: Four physiotherapists and one rehabilitation technician participated in the interviews. Six interrelated themes emerged, each having a systemic impact on the development of physiotherapy and rehabilitation services in Haiti: (1) physiotherapy as an emerging field, (2) government funding and planning of physiotherapy services, (3) accessibility to physiotherapy services, (4) relationship with doctors, (5) international collaboration, and (6) Haitian physiotherapy associations. CONCLUSION: This study highlights the ongoing efforts of local physiotherapy associations in advocating for the profession in Haiti, which has become one of the profession's main strengths. The lack of government funding and service planning was considered a significant barrier to overcome, as was the aftermath of the earthquake's emergency response. Future international efforts could focus on supporting local physiotherapy associations and organisations in their endeavours to develop sustainable rehabilitation services.

Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization.

The current scale of plastics production and the accompanying waste disposal problems represent a largely untapped opportunity for chemical upcycling. Tandem catalytic conversion by platinum supported on γ-alumina converts various polyethylene grades in high yields (up to 80 weight percent) to low-molecular-weight liquid/wax products, in the absence of added solvent or molecular hydrogen, with little production of light gases. The major components are valuable long-chain alkylaromatics and alkylnaphthenes (average ~C30, dispersity Ð = 1.1). Coupling exothermic hydrogenolysis with endothermic aromatization renders the overall transformation thermodynamically accessible despite the moderate reaction temperature of 280°C. This approach demonstrates how waste polyolefins can be a viable feedstock for the generation of molecular hydrocarbon products.

Complete Genome Sequences for Two Myoviridae Strains Infecting Cyanobacteria in a Subarctic Lake.

We isolated two closely related strains that belong to the Myoviridae family and infect cyanobacteria in a shallow subarctic rock basin lake. Their host was identified as a member of the Synechococcus-Cyanobium complex. Sequenced genomes of the two phages were 244,930 bp and 243,633 bp. We describe their annotation and highlight some noteworthy features.

Compatibilization of iPP/HDPE Blends with PE-g-iPP Graft Copolymers.

The compatibilization of polyethylene (PE) and isotactic polypropylene (iPP) blends is of particular interest due to the challenges associated with recycling these plastics from mixed waste streams. Polyethylene-graft-iPP copolymers (PE-g-iPP) were prepared using a grafting-through strategy by copolymerization of ethylene with allyl-terminated iPP macromonomers in the presence of a hafnium pyridylamido catalyst. Graft copolymers with a variety of graft lengths (Mn = 6-28 kg/mol), graft numbers, and graft spacings were prepared. These graft copolymers were melt-blended with high-density polyethylene (HDPE) and iPP (iPP/HDPE = 30/70 w/w), and the blend properties were evaluated by tensile testing. The blends showed enhanced tensile strength at 5 and 1 wt % loading, with higher tensile strength observed for larger block numbers and graft lengths. These results indicate that graft copolymers are efficient compatibilizers for blends of HDPE and iPP.

Upcycling Single-Use Polyethylene into High-Quality Liquid Products.

Our civilization relies on synthetic polymers for all aspects of modern life; yet, inefficient recycling and extremely slow environmental degradation of plastics are causing increasing concern about their widespread use. After a single use, many of these materials are currently treated as waste, underutilizing their inherent chemical and energy value. In this study, energy-rich polyethylene (PE) macromolecules are catalytically transformed into value-added products by hydrogenolysis using well-dispersed Pt nanoparticles (NPs) supported on SrTiO3 perovskite nanocuboids by atomic layer deposition. Pt/SrTiO3 completely converts PE (M n = 8000-158,000 Da) or a single-use plastic bag (M n = 31,000 Da) into high-quality liquid products, such as lubricants and waxes, characterized by a narrow distribution of oligomeric chains, at 170 psi H2 and 300 °C under solvent-free conditions for reaction durations up to 96 h. The binding of PE onto the catalyst surface contributes to the number averaged molecular weight (M n) and the narrow polydispersity (D) of the final liquid product. Solid-state nuclear magnetic resonance of 13C-enriched PE adsorption studies and density functional theory computations suggest that PE adsorption is more favorable on Pt sites than that on the SrTiO3 support. Smaller Pt NPs with higher concentrations of undercoordinated Pt sites over-hydrogenolyzed PE to undesired light hydrocarbons.

Switchable living nickel(ii) α-diimine catalyst for ethylene polymerisation.

Design and synthesis of a Ni(ii) "sandwich" α-diimine complex (1) resulted in a switchable catalyst for the living polymerisation of ethylene over a range of temperatures and pressures. Varying these conditions produced a well-defined tetrablock copolymer comprising branched and highly linear polyethylenes. This copolymer improved the toughness of a phase separated LDPE/HDPE blend by nonreactive interfacial compatibilisation.

Dual catalysis for the copolymerisation of epoxides and lactones.

A dual catalysis system was developed to synthesize hydrolyzable polyether-polyester copolymers from propylene oxide and cyclic esters such as γ-butyrolactone, δ-valerolactone, and ε-caprolactone. A bimetallic chromium catalyst active for the enantioselective polymerisation of propylene oxide and an organocatalyst active for the ring-opening polymerisation of lactones were used in conjunction with an alcohol chain shuttling agent to create new copolymers. The monomer and alcohol ratios were varied to yield a wide range of copolymers with varying monomer ratios, molecular weights, and crystallinities.