Certification of a reference material of metal content in atmospheric particles deposited on filters.

Air quality is one of the areas in Europe where a series of EU Directives have been published with the aim of achieving improved long-term and harmonised air quality objectives across the European Union. This paper describes the production of a certified reference material, aiming to support QA/QC programmes of analytical laboratories in the framework of the air quality monitoring activities. The certified values are the As, Cd, Ni and Pb masses in PM10 particles deposited on quartz filters (CRM SL-MR-2-PSF-01). All the steps of the certification, i.e. the material characterisation, homogeneity and stability evaluation and uncertainty calculation, were performed according to the ISO guide 35 guidelines. The certification was conducted using the characterisation by a single method approach based on isotope dilution for cadmium, nickel, and lead and gravimetric standard addition calibration for arsenic associated with inductively coupled mass spectrometry (ICP-MS). The amounts of the four elements are in the range of the target values regulated by EU Directives.

Method development for genomic Legionella pneumophila DNA quantification by inductively coupled plasma mass spectrometry.

The development of a method for the quantification of Legionella pneumophila genomic deoxyribonucleic acid is considered. The method is based on the quantification by inductively coupled plasma mass spectrometry (ICP-MS) of the mass fraction of phosphorus, stoichiometrically presented in the DNA molecules. Through the DNA sequencing data, it was possible to convert the ICP-MS analysis results into DNA genome units. L. pneumophila DNA samples were analyzed using ICP-sector field MS and ICP-quadrupole MS with a collision/reaction cell. Spectrophotometric measurements of the absorbance at 260nm and real-time PCR techniques were used to independently confirm the ICP-MS results. The comparison of the methods showed that the ICP-MS method provides better accuracy with respect to currently applied analytical techniques such as UV spectrophotometry, fluorescent dye methods, and real-time PCR. Moreover, with the use of calibration standards whose values are traceable to the International System of Units and the possibility of evaluating the contribution to the overall uncertainty of each step of the measurement procedure, the method enables long-term comparability of the measurement results. These advantages make the ICP-MS method suitable for nucleic acid investigation, from nucleotides to genomic DNA, as well as for the certification of the reference materials containing nucleic acids.

Uptake of selenite by Saccharomyces cerevisiae involves the high and low affinity orthophosphate transporters.

Although the general cytotoxicity of selenite is well established, the mechanism by which this compound crosses cellular membranes is still unknown. Here, we show that in Saccharomyces cerevisiae, the transport system used opportunistically by selenite depends on the phosphate concentration in the growth medium. Both the high and low affinity phosphate transporters are involved in selenite uptake. When cells are grown at low P(i) concentrations, the high affinity phosphate transporter Pho84p is the major contributor to selenite uptake. When phosphate is abundant, selenite is internalized through the low affinity P(i) transporters (Pho87p, Pho90p, and Pho91p). Accordingly, inactivation of the high affinity phosphate transporter Pho84p results in increased resistance to selenite and reduced uptake in low P(i) medium, whereas deletion of SPL2, a negative regulator of low affinity phosphate uptake, results in exacerbated sensitivity to selenite. Measurements of the kinetic parameters for selenite and phosphate uptake demonstrate that there is a competition between phosphate and selenite ions for both P(i) transport systems. In addition, our results indicate that Pho84p is very selective for phosphate as compared with selenite, whereas the low affinity transporters discriminate less efficiently between the two ions. The properties of phosphate and selenite transport enable us to propose an explanation to the paradoxical increase of selenite toxicity when phosphate concentration in the growth medium is raised above 1 mm.