Single-shot ultrafast laser processing of high-aspect-ratio nanochannels using elliptical Bessel beams.

Ultrafast lasers have revolutionized material processing, opening a wealth of new applications in many areas of science. A recent technology that allows the cleaving of transparent materials via non-ablative processes is based on focusing and translating a high-intensity laser beam within a material to induce a well-defined internal stress plane. This then enables material separation without debris generation. Here, we use a non-diffracting beam engineered to have a transverse elliptical spatial profile to generate high-aspect-ratio elliptical channels in glass of a dimension 350 nm×710 nm and subsequent cleaved surface uniformity at the sub-micron level.

High aspect ratio micro-explosions in the bulk of sapphire generated by femtosecond Bessel beams.

Femtosecond pulses provide an extreme degree of confinement of light matter-interactions in high-bandgap materials because of the nonlinear nature of ionization. It was recognized very early on that a highly focused single pulse of only nanojoule energy could generate spherical voids in fused silica and sapphire crystal as the nanometric scale plasma generated has energy sufficient to compress the material around it and to generate new material phases. But the volumes of the nanometric void and of the compressed material are extremely small. Here we use single femtosecond pulses shaped into high-angle Bessel beams at microjoule energy, allowing for the creation of very high 100:1 aspect ratio voids in sapphire crystal, which is one of the hardest materials, twice as dense as glass. The void volume is 2 orders of magnitude higher than those created with Gaussian beams. Femtosecond and picosecond illumination regimes yield qualitatively different damage morphologies. These results open novel perspectives for laser processing and new materials synthesis by laser-induced compression.

Spatiotemporal structure of femtosecond Bessel beams from spatial light modulators.

We numerically investigate the spatiotemporal structure of Bessel beams generated with spatial light modulators (SLMs). Grating-like phase masks enable the spatial filtering of undesired diffraction orders produced by SLMs. Pulse front tilt and temporal broadening effects are investigated. In addition, we explore the influence of phase wrapping and show that the spatiotemporal structure of SLM-generated femtosecond Bessel beams is similar to Bessel X-pulses at short propagation distance and to subluminal pulsed Bessel beams at long propagation distance.

Real-time full bandwidth measurement of spectral noise in supercontinuum generation.

The ability to measure real-time fluctuations of ultrashort pulses propagating in optical fiber has provided significant insights into fundamental dynamical effects such as modulation instability and the formation of frequency-shifting rogue wave solitons. We report here a detailed study of real-time fluctuations across the full bandwidth of a fiber supercontinuum which directly reveals the significant variation in measured noise statistics across the spectrum, and which allows us to study correlations between widely separated spectral components. For two different propagation distances corresponding to the onset phase of spectral broadening and the fully-developed supercontinuum, we measure real time noise across the supercontinuum bandwidth, and we quantify the supercontinuum noise using statistical higher-order moments and a frequency-dependent intensity correlation map. We identify correlated spectral regions within the supercontinuum associated with simultaneous sideband generation, as well as signatures of pump depletion and soliton-like pump dynamics. Experimental results are in excellent agreement with simulations.

Sending femtosecond pulses in circles: highly nonparaxial accelerating beams.

We use caustic beam shaping on 100 fs pulses to experimentally generate nonparaxial accelerating beams along a 60° circular arc, moving laterally by 14 µm over a 28 µm propagation length. This is the highest degree of transverse acceleration reported to our knowledge. Using diffraction integral theory and numerical beam propagation simulations, we show that circular acceleration trajectories represent a unique class of nonparaxial diffraction-free beam profile which also preserves the femtosecond temporal structure in the vicinity of the caustic.

Arbitrary accelerating micron-scale caustic beams in two and three dimensions.

We generate arbitrary convex accelerating beams by direct application of an appropriate spatial phase profile on an incident Gaussian beam. The spatial phase calculation exploits the geometrical properties of optical caustics and the Legendre transform. Using this technique, accelerating sheet caustic beams with parabolic profiles (i.e. Airy beams), as well as quartic and logarithmic profiles are experimentally synthesized from an incident Gaussian beam, and we show compatibility with material processing applications using an imaging system to reduce the main intensity lobe at the caustic to sub-10 micron transverse dimension. By applying additional and rotational spatial phase, we generate caustic-bounded sheet and volume beams, which both show evidence of the recently predicted effect of abrupt autofocussing. In addition, an engineered accelerating profile with femtosecond pulses is applied to generate a curved zone of refractive index modification in glass. These latter results provide proof of principle demonstration of how this technique may yield new degrees of freedom in both nonlinear optics and femtosecond micromachining.

High aspect ratio taper-free microchannel fabrication using femtosecond Bessel beams.

We present a systematic study of femtosecond laser microchannel machining in glass using nondiffracting Bessel beams. In particular, our results identify a source and focusing parameter working window where high aspect ratio taper-free microchannels can be reproducibly produced without sample translation. With appropriate source parameters, we machine channels of 2 microm diameter and with aspect ratios up to 40. We propose the filamentation stability of the Bessel beam propagation as the critical factor underlying the controlled and reproducible results that have been obtained.

Surface nanoprocessing with nondiffracting femtosecond Bessel beams.

We demonstrate the application of nondiffracting Bessel beams for reproducible nanometric-scale feature patterning in glass. A femtosecond pulse zero-order Bessel beam with a central spot radius of 360 nm was used to write 500 nm radius nanocraters over a longitudinal positioning range exceeding 20 microm, with a variation in radius of less than 10%. The use of Bessel beams significantly reduces constraints on critical sample positioning in the nanoscale writing regime, enabling the use of femtosecond pulses for fast inscription of nanometer-scale features over large sample areas.

Use of superfused rat skeletal muscle for metabolic studies: assessment of pH by 31P n.m.r.

We developed a muscle superfusion system suitable for metabolic studies of small isolated rat muscle ex vivo in real time and in a non-destructive manner by n.m.r. spectroscopy. In order to determine biochemical stability of superfused extensor digitorum longus (EDL) muscle (from fasted 45 and 100 g rats), the energy state and the pH of muscle were continuously monitored by 31P n.m.r. spectroscopy. ATP and phosphocreatine remained stable during 2 h whatever the muscle size (20 or 45 mg). Neither metabolite was a sensitive probe of possible metabolic compartmentation within muscle under our experimental conditions. By contrast, the chemical shift of Pi by its sensitivity to pH was a discriminant factor in the assessment of muscle stability. Indeed, heterogeneity of pH was observed only in the 45 mg EDL muscle resulting from a core region with loss of glycogen. Together, these observations suggest deviations of energy metabolism to supply ATP. Consequently, pH may be considered as a new real-time criterion for monitoring a metabolic heterogeneity due to changes in energy metabolism of muscle preparations ex vivo.