The retinoid metabolism of Gammarus fossarum is disrupted by exogenous all-trans retinoic acid, citral, and methoprene but not by the technical formulation of glyphosate.

Over the last decade, fluctuations of retinoids (RETs), also known as vitamin A and derivatives, have proved to be useful biomarkers to assess the environmental chemical pressure on a wide variety of non-target vertebrates. This use of RET-based biomarkers is of particular interest in the non-target sentinel species Gammarus fossarum in which RETs were shown to influence crucial physiological functions. To study and probe this metabolism in this crustacean model, a UHPLC-MS/MS method was developed to 1) identify and 2) monitor several endogenous RETs in unexposed females throughout their reproductive cycle. Then, females were exposed in controlled conditions to exogenous all-trans retinoic acid (atRA) and citral (CIT), a RA synthesis inhibitor, to simulate an excess or deficiency in RA. Perturbation of vitamin A metabolism by pesticides was further studied in response to methoprene (MET), a juvenile hormone analog as well as glyphosate (GLY). The developed method allowed, for the first time in this model, the identification of RA metabolites (all-trans 4-oxo and 13-cis 4-oxo RA), RA isomers (all-trans and 13-cis RA) as well as retinaldehyde (RALD) isomers (all-trans, 11-cis, and 13-cis RALD) and showed two distinct phases in the reproductive cycle. Retinoic acid successfully increased the tissular concentration of both RA isomers and CIT proved to be efficient at perturbating the conversion from RALD to RA. Methoprene perturbed the ratios between RA isomers whereas GLY had no observed effects on the RET system of G. fossarum females. We were able to discriminate different dynamics of RET perturbations by morphogens (atRA or CIT) or MET which highlights the plausible mediation of RETs in MET-induced disorders. Ultimately, our study shows that RETs are influenced by exposure to MET and strengthen their potential to assess aquatic ecosystem chemical status.

Evaluation of the accumulation of the iodinated contrast agents diatrizoic acid and iohexol in Dreissena polymorpha mollusks.

Mollusks are very sensitive to aquatic environmental alterations and then, are important bio-indicators for monitoring the contamination of water bodies. Iodinated X-ray contrast media (ICMs) are ubiquitously present in the aquatic environment, primarily due to their high consumption for diagnosis purposes, high injection levels, low biodegradability, and low removal rates by wastewater treatment plants. Although these compounds are assumed to be of low toxicity, aquatic organisms are continuously exposed to these agents, which may result in adverse effects as ICMs can act as iodine source and disrupt the endocrine system. Thus, the evaluation of their environmental risk, especially on aquatic fauna is of great interest. To this end, we first compared the accumulation behavior, based on iodine analysis, of two ICM exhibiting different osmolality, diatrizoic acid and iohexol in Dreissena polymorpha bivalves exposed under laboratory conditions at concentrations of 0, 100, and 1000 µg/L during 4 and 7 days. This study was the first to provide information on iodine concentration in whole soft tissues and several organs in control zebra mussels. Moreover, it showed, after exposure, an increase of iodine content mainly in the digestive glands, followed by gills and gonads, highlighting that ICMs actually enter the organisms. Thus, bioaccumulation of ICMs studies were then performed, by liquid chromatography coupled to tandem mass spectrometry, on entire mollusks and digestive glands of organisms exposed at 0, 10, 100, and 1000 µg/L of both ICMs during 21 days, followed by 4 days of depuration. These first data on ICMs concentrations in zebra mussels, showed a clear accumulation of ICMs in mussels as a function of relative exposure level, as well as a rapid depuration. Osmolality did not seem to have a significant impact on the accumulation level, but a slight difference was observed on the accumulation pattern between both ICMs.

Ultrasound-assisted QuEChERS-based extraction using EDTA for determination of currently-used pesticides at trace levels in soil.

It is essential to monitor pesticides in soils as their presence at trace levels and their bioavailability can induce adverse effects on soil's ecosystems, animals, and human health. In this study, we developed an analytical method for the quantification of traces of multi-class pesticides in soil using liquid chromatography-tandem mass spectrometry. In this way, 31 pesticides were selected, including 12 herbicides, 9 insecticides, and 10 fungicides. Two extraction techniques were first evaluated, namely, the pressurized liquid extraction and the QuEChERS procedure. The latest one was finally selected and optimized, allowing extraction recoveries of 55 to 118%. The role of the chelating agent EDTA, which binds preferentially to soil cations that complex some pesticides, was highlighted. Coupled with liquid chromatography-tandem mass spectrometry, the procedure displayed very high sensitivity, with limits of quantification (LOQ) in the range 0.01-5.5 ng/g. A good linearity (R2 > 0.992) was observed over two orders of magnitude (LOQ-100 [Formula: see text] LOQ) with good accuracy (80-120%) for all compounds except the two pyrethroids lambda-cyhalothrin and tau-fluvalinate (accuracy comprised between 50 and 175%) and the cyclohexanedione cycloxydim (accuracy < 35%). Good repeatability and reproducibility were also achieved. The method was finally successfully applied to 12 soil samples collected from 3 land-use types. Among the 31-targeted pesticides, 24 were detected at least once, with concentration levels varying from LOQ to 722 ng/g. Many values were below 0.5 ng/g, indicating that the developed method could provide new knowledge on the extremely low residual contents of some pesticides.

Design of Hybrid PAH Nanoadsorbents by Surface Functionalization of ZrO2 Nanoparticles with Phosphonic Acids.

This study focuses on the preparation of innovative nanocomposite materials based on surface modification of commercial nano-ZrO2 optimized from Brønsted acid-base surface reactions. This surface modification was carried out by direct grafting of suitable phosphonic acids bearing a vinylic or phenylic substituent in aqueous solution. Different loading quantities of the anchoring organophosphorus compounds were applied for each materials synthesis. The resulting nanohybrids were thoroughly characterized by infrared spectroscopy (DRIFT), solid-state nuclear magnetic resonance (NMR), nitrogen adsorption-desorption (BET), thermogravimetric analysis (TG), and X-ray photoelectron spectroscopy (XPS), demonstrating the reliability and efficient tunability of the surface functionalization based on the starting Zr/P ratio. Our nanocomposite materials exhibited a high specific surface area as well as complex porosity networks with well-defined meso-pore. The as-prepared materials were investigated for the adsorption of a mixture of 16 polycyclic aromatic hydrocarbons (PAHs) at 200 ng·mL-1 in an aqueous solution. Adsorption kinetics experiments of each individual material were carried out on the prepared PAHs standard solution for a contact time of up to 6 h. Pretreatments of the adsorption test samples were performed by solid-phase extraction (SPE), and the resulting samples were analyzed using an ultrasensitive GC-orbitrap-MS system. The pseudo-first-order and the pseudo-second-order models were used to determine the kinetic data. The adsorption kinetics were best described and fitted by the pseudo-second-order kinetic model. The correlation between the nature of the substituent (vinylic or phenylic) and the parameters characterizing the adsorption process were found. In addition, an increase of PAHs adsorption rates with phosphonic acid loading was observed.

Does water temperature influence the distribution and elimination of perfluorinated substances in rainbow trout (Oncorhynchus mykiss)?

Perfluorinated and polyfluorinated substances (PFASs) are widely found in freshwater ecosystems because of their resistance to degradation and their ability to accumulate in aquatic organisms. While water temperature controls many physiological processes in fish, knowledge of the effects of this factor on PFAS toxicokinetic is still limited. This study presents experimental results of internal distribution and elimination rates of two perfluorinated acid compounds, namely perfluorooctane sulfonate (PFOS) and perfluorohexane sulfonate (PFHxS) in adult rainbow trout (Oncorhynchus mykiss) exposed to three temperatures. Dietary exposure experiments were conducted at 7 °C, 11 °C, and 19 °C and liver, blood, muscle, brain, and kidney were sampled for analysis. PFOS concentrations were comparable to or exceeded those of PFHxS, while PFHxS was eliminated faster than PFOS, whatever the temperature. Internal distribution changed significantly for both substances when fish were exposed to a range of temperatures from 7 to 19 °C. Indeed, PFOS and PFHxS relative distribution increased in blood, liver, and brain while they decreased in muscle when the water temperature rose. The water temperature variation affected the elimination half-lives, depending on the substances and organs.

Priority substances in accumulated sediments in a stormwater detention basin from an industrial area.

One of the most adopted solutions in developed countries to manage stormwater is detention/retention basins which generate large quantities of sediments that have to be removed regularly. In order to manage them properly, accurate data are needed about their physical and chemical characteristics, particularly on micropollutant concentrations and their associated risk. This work consisted in a two-year sampling of dry sediments from a detention-settling basin. Priority substances, including pesticides, polybrominated diphenyl ethers (PBDE), alkylphenols and bisphenol A (BPA), were monitored. Different sites in the basin bottom were sampled in order to investigate spatial distribution of the contamination. Results show that the increase of the sediment thickness in the basin was heterogeneous with a maximum of 15 cm after two years. Pesticides and PBDE were, if detected, mainly found in low concentrations from 2 ng/g to 286 ng/g. Conversely, alkylphenols and bisphenol A were always quantified at concentrations varying from 6 ng/g to 3400 ng/g. These high levels suggest that these sediments should be managed with precautions. Spatial heterogeneity of alkylphenol ethoxylates and BPA concentrations was observed, with higher contamination of alkylphenol ethoxylates in anaerobic zones and BPA levels correlated with total organic carbon and in a lesser extent to fine particles.

Development of a method for the simultaneous determination of multi-class pesticides in earthworms by liquid chromatography coupled to tandem electrospray mass spectrometry.

Agricultural intensification, and in particular the use of pesticides, leads over the years to a loss of biodiversity and a decline of ecosystem services in cultivated zones and agricultural landscapes. Among the animal communities involved in the functioning of agro-ecosystems, earthworms are ubiquitous and recognized as indicators of land uses and cultural practices. However, little data is available on the levels of pesticides in such organisms in natura, which would allow estimating their actual exposure and the potentially resulting impacts. Thus, the objective of this study was to develop a sensitive analytical methodology to detect and quantify 27 currently used pesticides in earthworms (Allolobophora chlorotica). A modified QuEChERS extraction was implemented on individual earthworms. This step was followed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). The whole analytical method was validated on spiked earthworm blank samples, with regard to linearity (from 1 to 100 method limit of quantification, r2 > 0.95), intra-day precision (relative standard deviation (RSD) < 15%), inter-day precision (RSD < 20%), recoveries (mainly in the range 70-110%), and limits of detection and of quantification (inferior to 5 ng/g for most of the pesticides). The developed method was successfully applied to determine the concentrations of pesticides in nine individuals collected in natura. Up to five of the selected pesticides have been detected in one individual. Graphical abstract.

Human exposure assessment to a large set of polymer additives through the analysis of urine by solid phase extraction followed by ultra high performance liquid chromatography coupled to tandem mass spectrometry.

Polymer items are extensively present in the human environment. Humans may be consequently exposed to some compounds, such as additives, incorporated in these items. The objective of this work is to assess the human exposure to the main additives such as those authorized in the packaging for pharmaceutical products. The urinary matrix was selected to optimally answer this challenge because it has already been proven that the exposure to chemicals can be revealed by the analysis of this biological matrix. A multi-residue analytical method for the trace analysis at ng/mL in human urine was developed, and consisted of an extraction of analytes from urine by solid phase extraction (SPE) and an analysis by ultra-high performance liquid chromatography coupled to a tandem mass spectrometer (UHPLC-MS/MS). Even if the quantification of these compounds was an analytical challenge because of (i) the presence of these substances in the analytical process, (ii) the diversity of their physicochemical properties, and (iii) the complexity of the matrix, the optimized method exhibited quantification limits lower than 25ng/mL and recoveries between 51% and 120% for all compounds. The method was validated and applied to 52 human urines. To the best of our knowledge, this work presents the first study allowing the assessment of the occurrence of more than twenty polymer additives at ng/mL in human urine.

A pragmatic approach to assess the exposure of the honey bee (Apis mellifera) when subjected to pesticide spray.

Plant protection spray treatments may expose non-target organisms to pesticides. In the pesticide registration procedure, the honey bee represents one of the non-target model species for which the risk posed by pesticides must be assessed on the basis of the hazard quotient (HQ). The HQ is defined as the ratio between environmental exposure and toxicity. For the honey bee, the HQ calculation is not consistent because it corresponds to the ratio between the pesticide field rate (in mass of pesticide/ha) and LD50 (in mass of pesticide/bee). Thus, in contrast to all other species, the HQ can only be interpreted empirically because it corresponds to a number of bees/ha. This type of HQ calculation is due to the difficulty in transforming pesticide field rates into doses to which bees are exposed. In this study, we used a pragmatic approach to determine the apparent exposure surface area of honey bees submitted to pesticide treatments by spraying with a Potter-type tower. The doses received by the bees were quantified by very efficient chemical analyses, which enabled us to determine an apparent surface area of 1.05 cm(2)/bee. The apparent surface area was used to calculate the exposure levels of bees submitted to pesticide sprays and then to revisit the HQ ratios with a calculation mode similar to that used for all other living species. X-tomography was used to assess the physical surface area of a bee, which was 3.27 cm(2)/bee, and showed that the apparent exposure surface was not overestimated. The control experiments showed that the toxicity induced by doses calculated with the exposure surface area was similar to that induced by treatments according to the European testing procedure. This new approach to measure risk is more accurate and could become a tool to aid the decision-making process in the risk assessment of pesticides.

A national reconnaissance for selected organic micropollutants in sediments on French territory.

To collect a large data set regarding the occurrence of organic substances in sediment, this study presents the examination of 20 micropollutants, as a national survey. The list of target compounds contains two alkylphenols, three polycyclic aromatic hydrocarbons (PAHs) not commonly included in monitoring programmes, six pesticides or metabolites, five pharmaceutical compounds, two hormones, one UV filter and bisphenol A. The selective and sensitive analytical methods, based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) or gas chromatography-time-of-flight mass spectrometry (GC-ToF-MS), allow the quantification at limits comprised between 0.5 and 23 ng/g, depending on the compound. The paper summarizes the analytical results from 154 sampling points. Of the 20 target compounds, 9 were determined at least once, and the sediments contained a maximum of 7 substances. The most frequently detected were PAHs (frequency, 77 %; max., 1,400 ng/g). The pharmaceutical compounds, hormones and pesticides were rarely detected in the samples; the most frequently detected was carbamazepine (frequency, 6 %; max., 31 ng/g). In some cases, the levels of PAHs and bisphenol A exceed the predicted no-effect concentration (PNEC) values.

Survey regarding the occurrence of selected organic micropollutants in the groundwaters of overseas departments.

To collect a complete dataset regarding the occurrence of organic substances in groundwater, this study presents the examination of 66 organic contaminants in the groundwater of overseas departments, including pesticides, pharmaceutical compounds, hormones and some industrial substances. The selective and sensitive analytical methods are described. These techniques begin with solid-phase extraction (SPE) followed by analysis using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and gas chromatography-mass spectrometry (GC-ToF-MS). The paper summarises the analytical results from 40 sampling points collected during two campaigns in Guadeloupe, Martinique, Reunion, Mayotte and Guiana, representing 80 samples. Of the 66 target substances, 36 were determined at least once. Among the most frequently detected are bisphenol A (frequency, 96%; max., 7,400 ng/L), caffeine (frequency, 91%; max., 1,240 ng/L), pentachlorophenol (frequency, 55%; max., 418 ng/L), and carbamazepine (frequency, 56%; max., 22 ng/L). The results do not put in evidence that the origin of the sample or climatic characteristics of these regions influence the dilution and release of micropollutants.

Monitoring the extraction of additives and additive degradation products from polymer packaging into solutions by multi-residue method including solid phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry analysis.

The use of polymer materials in industry for product packaging is increasing. The presence of additives in the polymer matrix enables the modification or improvement of the properties and performance of the polymer, but these industries are concerned regarding the extractability of these additives. The quantification of these additives is particularly challenging because of the presence of these substances as contaminants in all the analytical equipment and the diversity of their physicochemical properties. In this context, a multi-residue analytical method was developed for the trace analysis of the twenty main additives (and their degradation products) authorized in plastic products such as pharmaceutical packaging (e.g., antioxidants, release agents, and light absorbers). This analytical method consisted of a solid phase extraction (SPE) followed by an analysis using ultra-high performance liquid chromatography coupled to a tandem mass spectrometer (UHPLC-MS/MS). A comparison of two ionization interfaces and the optimization of the extraction procedure were discussed. The influence of the quality of the solvent type (distilled versus not distilled) and the nature of the SPE cartridges (Polypropylene versus Teflon(®)) were demonstrated. The optimized method exhibited a quantification limit lower than 20 ng mL(-1) and recoveries between 70 % and 120 % for all compounds. Finally, the method was validated according to the ICH directive and was subsequently applied to the extraction of polymers under different pH conditions and storage temperatures. To the best of our knowledge, this study presents the first methodology allowing the simultaneous quantification of 24 additives at low ng mL(-1).

Multi-residue analysis of free and conjugated hormones and endocrine disruptors in rat testis by QuEChERS-based extraction and LC-MS/MS.

Endocrine disrupting compounds (EDCs) are suspected to be responsible for many disorders of the human reproductive system. To establish a causality relationship between exposure to endocrine disruptors and disease, experiments on animals must be performed with improved or new analytical tools. Therefore, a simple, rapid, and effective multi-residue method was developed for the determination of four steroid hormones (i.e., testosterone, androstenedione, estrone, and estradiol), glucuronide and sulfate conjugates of estrone and estradiol and four endocrine disruptors in rat testis (i.e., bisphenol A, atrazine, and active metabolites of methoxychlor and vinclozolin). The sample preparation procedure was based on the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) approach. An analytical method was then developed to quantify these compounds at ultra-trace levels by liquid chromatography coupled to tandem mass spectrometry. The QuEChERS extraction was optimized with regard to the acetonitrile/water ratio used in the extraction step, the choice of the cleanup method and the acetonitrile/hexane ratio used in the cleanup step. The optimized extraction method exhibited recoveries between 89% and 108% for all tested compounds except the conjugates (31% to 58%). The detection limits of all compounds were below 20 ng g(-1) of wet weight of testis. The method was subsequently applied to determine the levels of hormones and EDCs in seven rat testis samples.

Contribution of microextraction in packed sorbent for the analysis of cotinine in human urine by GC-MS.

A simple, rapid, sensitive, and non-consuming solvent method for the determination of cotinine in urine was developed, based on sample preparation by the relatively new technique microextraction in packed sorbent (MEPS) and analysis by GC-MS. This optimized method was compared with conventional solid-phase extraction/liquid-liquid extraction method used as reference. The wide linear range (5-5,000 ng/mL) and high sensitivity of the MEPS method (limit of detection 0.8 ng/mL) allow application to analysis of urine from smokers as well as non-smokers susceptible to passive smoking.