Simultaneous determination of arsenic, selenium and mercury in foodstuffs by chemical vapour generation inductively coupled plasma optical emission spectroscopy.

A procedure for the simultaneous determination of arsenic, selenium and mercury in foodstuffs has been developed. After a two-step microwave-assisted wet digestion in closed vessels, using concentrated nitric acid and hydrogen peroxide, the solution was analysed by inductively coupled plasma multichannel-based emission spectrometry using chemical vapour generation as the sample introduction system. All steps of the procedure, such as solid sample dissolution, pre-reduction to the suitable oxidation state, vapor generation, transport and atomization have been designed and optimised taking into account the concomitant presence of all the analytes considered. Temporal variation of analytical signals as well as interfering effects due to transition elements were also studied. Under the optimised operating conditions, the achieved detection limits for the simultaneous determination of arsenic, selenium and mercury in foodstuffs were 0.006, 0.023 and 0.018 microg g(-1), respectively, allowing their determination in real samples. Precision of the analytical procedure was 6.8% for arsenic, 5.2% for selenium and 7.7% for mercury (n=7). The accuracy and reliability of the method was verified by the analysis of both standard reference materials (rice flour and spinach leaves) and real samples (natural and Se-enriched rice).

Multivariate optimization of an axially-viewed inductively coupled plasma multichannel-based emission spectrometer for the analysis of environmental samples.

An experimental design procedure was applied to optimize the operating conditions of an axially-viewed inductively coupled plasma emission spectrometer instruments equipped with echelle optics with cross dispersion and charge transfer device. The multivariate effect of carrier gas flow rate and r.f. power on several analytical figures was investigated and discussed. Both ultrasonic and pneumatic nebulization were used. For the final choice of the optimum, different criteria were taken into account, mainly plasma robustness, instrumental precision, analyte and background net emission, detection limits and signal-to-background ratios. It was found that the use of moderate power (1100W) and mean carrier gas flow rate (0.75 L/min) allows to obtain sufficient plasma robustness, satisfactory precision, and excellent signal-to-background ratios and limits of detection, favorable for ultratrace element determinations in environmental matrices.