RESUMO
In this paper, a titanium dioxide/covalent organic framework (TiO2/COF) composite was prepared and its photocatalytic removal of dye was investigated. Using tetrabutyl titanate as a titanium source, TiO2 nanomaterial was prepared by sol-gel method. In the presence of TiO2, TiO2/COF core-shell composite was prepared by solvothermal synthesis using melamine and 1,4-phthalaldehyde as ligands. The prepared materials are characterized by SEM, TEM, XPS, XRD, TG, FTIR, BET, EPR, PL, and UV-Vis-DRS techniques. Using malachite green as a model of dye wastewater, the photocatalytic degradation performance of TiO2/COF composites was investigated under the irradiation of ultraviolet light. The results show that the modification of COF significantly improves the photocatalytic efficiency of TiO2, the degradation rate increases from 69.77 % to 93.64 %, and the reaction rate constant of the first-order kinetic equation is increased from 0.0078â min-1 to 0.0192â min-1. Based on the free radical capture experiment, the photocatalytic degradation mechanism of TiO2/COF was discussed, and the feasibility of its photocatalytic degradation of malachite green was theoretically clarified. Accordingly, a simple and practical method for photocatalytic degradation of malachite green was constructed, which has potential application value in the degradation of dye wastewater.
RESUMO
In this paper, covalent organic frameworks (COFs) are prepared by solvothermal synthesis using 1,3,5-benzenetricarboxaldehyde and benzidine as ligands. Then, using COFs as a template, AgCOFs with high catalytic activity is prepared by in situ loading silver nanoparticles (AgNC) on the surface of COFs by sodium borohydride reduction method. AgCOFs are characterized by TEM, SEM, FTIR and XRD. At the same time, the catalytic ability of AgCOFs for trisodium citrate-AgNO3 nanosilver reaction is studied. The results show that AgCOFs can catalyze the reaction of trisodium citrate-AgNO3 to generate silver nanoparticles (AgNPs). The solution color of the system gradually changes from colorless to yellow, and the absorbance value increases. Based on the catalytic reaction of AgCOFs and the regulation effect of nucleic acid aptamer reaction on AgCOFs, a new "on-off-on" colorimetric analysis platform is constructed and applied to the detection of trace Pb2+ in water samples. This analytical platform is simple, sensitive and selective. Finally, the catalytic mechanism of the system is discussed to verify the feasibility of constructing a colorimetric analysis platform.
RESUMO
Novel ionic-liquid-functionalized Fe3 O4 magnetic nanoparticles were synthesized by the thiol-ene click reaction. The prepared functionalized Fe3 O4 nanoparticles possessed multiple interactions, such as electrostatic, hydrophobic, and π-π interactions. The functionalized Fe3 O4 nanoparticles were characterized by using Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometry, and transmission electron microscopy. Four kinds of linear alkylbenzene sulfonates, namely, sodium decylbenzenesulfonate, sodium undecylbenzene sulfonate, sodium dodecylbenzenesulfonate, and sodium tridecylbenzenesulfonate, were selected as model compounds to evaluate the applicability of adsorbents for extraction and subjected to high-performance liquid chromatography analysis. In addition, the effects of various parameters, such as sorbent amount, pH value, ionic strength, sample volume, extraction time, and elution conditions on extraction efficiency were studied in detail. Under the optimum conditions, good linearities were attained, with correlation coefficients between 0.9912 and 0.9968. The proposed method exhibited limits of detection ranging from 0.061 to 0.099 µg/L for all the target analytes. The spiked recoveries of the target analytes in real water samples ranged from 86.3 to 107.5%, with relative standard deviations lower than 7.96%. The enrichment factors of the analytes ranged from 364 to 391, indicating that the obtained functionalized Fe3 O4 nanoparticles can effectively extract trace target analytes from environmental water samples.
RESUMO
OBJECTIVE: To study the best extraction process of the polysaccharides from Euonymus fortuei with microwave. METHODS: The orthogonal experiment was used to investigate 4 influential factors: the ratio of solid to liquid (A), microwave power (B), extraction time (C), the times of extraction (D). RESULTS: The optimal conditions were A1B1C3D3 as the microwave power was 30W, the ratio of solid to liquid was 1:50, the time of extraction was 14 min, and extracting for 4 times. The extraction yields of polysaccharide from Euonymus fortunei was 10.56%. CONCLUSION: The microwave can be used in the extraction of the polysaccharides from Euonymus fortunei for shorter time and less energy.
